Products in Implants & Prosthetics: Good Adhesion

6 Products found in Implants & Prosthetics

Wacker Chemie AGELASTOSIL® P 7616-160 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Pourable, Light Weight, Good Adhesion

ELASTOSIL® P 7616-160 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It exhibits good adhesion to polyurethane film and easy metering and mixing. It is commonly used in the production of external mammary prostheses, where it serves as the material for the outer skin, which is made of polyurethane film.

Wacker Chemie AGELASTOSIL® P 7619 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Pourable, Light Weight, Good Adhesion

ELASTOSIL® P 7619 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It provides good adhesion to polyurethane films and is used for the production of external mammary prostheses with an outer skin of polyurethane film.

Wacker Chemie AGELASTOSIL® P 7630 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Fast Curing, Light Weight, Low Density, Good Adhesion

ELASTOSIL® P 7630 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It provides good adhesion to polyurethane films and is used for the production of external mammary prostheses with an outer skin of polyurethane film.

Facilan™ PCL 100 Filament banner

Elogio AMFacilan™ PCL 100 Filament

Polymer Name:Polycaprolactone (PCL)
Processing Methods:Fused Filament Fabrication
End Uses:Body Implants, Dental Applications
Density:1100.0 - 1100.0 kg/m³
Flexural Modulus:380.0 - 380.0 MPa

Facilan™ PCL100 (polycaprolactone 100) is a polycaprolactone material used widely for research applications in biofabrication such as scaffolds, braces, implants, smart materials, hydrogels, tissue engineering and drug delivery. Polycaprolactone in is reported in research tough, strong, flexible, bioabsornanle, biocompatible and compostable. It is based on raw material complaint with European regulation EC No. 10/2011 concerning plastic materials and articles coming into contact with food. Recommended restrictions. Do not use in medical applications involving permanent implantation in the human body.

3B Fibreglass MF 01 ER banner

3B Fibreglass3B Fibreglass MF 01 ER

Applications:Shingles & Tiles, Glazing & Window Elements, Parking Structures & Stadiums
Product Families:Glass Fiber, Reinforcements
End Uses:Pipes, Tanks

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Luvocom® 3F PEEK 9581 Filament banner

Elogio AMLuvocom® 3F PEEK 9581 Filament

Polymer Name:Polyetheretherketone (PEEK)
Processing Methods:Fused Filament Fabrication
End Uses:Automotive Interior Parts, Aerospace Applications, Prosthetics, Machine/Mechanical Parts, Pump Parts, Automotive Exterior Parts, Automotive Applications, Aircraft Applications, Body Implants
Density:1310.0 - 1310.0 kg/m³
Flexural Modulus:3400.0 - 3400.0 MPa

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.