Products in Laboratory & Diagnostics: Tubing

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Densetec® Shield is a product specially designed for nuclear shielding applications. The material employs 5% Boron by weight to shield neutrons in a variety of applications including high intensity X-rays, cancer treatment facilities, nuclear submarines, and nuclear power plants.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Polymer Industries integrates the antimicrobial protection into the product during the manufacturing process. Our antimicrobial material kills or inhibits the growth of microorganisms caused by bacteria, algae and fungi. Our products are also non-porous and kill the spread of bacteria resistant to moisture and mildew. The need to combat infectious diseases continues to increase in all commercial applications. Healthcare facilities and public venues are ideal locations for antimicrobial surfaces. In addition, antimicrobial surfaces are needed in food preparation areas, with food processing equipment and on industrial cutting surfaces. These products limit bacteria growth improving the hygiene of surfaces. Antibacterial products are created by incorporating an antibacterial agent (biocide) to suppress the growth of bacteria on the surfaces of products through a process called zone inhibition to control growth of bacteria, fungus and algae. Unlike surface antimicrobials, the advanced antimicrobial technology protects against bacterial degradation for the lifetime of the product. Antimicrobial products are treated with an antimicrobial agent to inhibit bacterial or fungal growth and are resistant to deterioration by mold, fungus or mildew. Studies have shown that surfaces with antimicrobial technology can inhibit the the amount of certain product-damaging bacteria by 99%. Disclaimer: Products prepared according to ASTM standards. This product does not protect users from diseases. Always clean surfaces thoroughly with household disinfectant.

Euro Extrusions LDPE is the low density version of Polyethylene. It has less hardness, stiffness and strength compared to HDPE, but more ductile. This plastic has an optimal density, hard wearing construct and long functional life. Its opacity means only thin foils can be transparent. LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, and various molded laboratory equipment. Its most common use is in plastic bags.

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Polyplastics Group Topas® 6013M-07Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant Topas® 6013M-07Topas® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Copolymer Good Esthetics