Products in Other Medical Applications: Consumer Applications

51 Products found in Other Medical Applications

VYNOVA™ S6502 banner

VYNOVAVYNOVA™ S6502

Polymer Name:Polyvinyl Chloride (PVC)
Processing Methods:Extrusion, Calendering
End Uses:Construction Applications, Medical/Healthcare Applications, Flooring, Film, Consumer Applications, Tubing, Tape, Medical Devices, Medical Packaging, Flexible Packaging, Containers

VYNOVA™ S6502 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering of both rigid and flexible PVC articles: profiles, sheets & films, compounds, and flooring.

Nano4 Bio EC 12 banner

Nano4Nano4 Bio EC 12

Density:800.0 - 800.0 kg/m³

Nano4 Bio EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

MicroMB PPA 26D banner

MicroMBMicroMB PPA 26D

Functions:Processing Aid
Compatible Polymers & Resins:Polyethylenes (PE)
Processing Methods:Cast Film Extrusion
Carrier:Resin-based, Polyethylenes (PE)

PPA 26D is a polymer processing aid with PE Resin. It is used in consumer goods , healthcare ,packaging.

Compounding Solutions Defend Rx PA2000 banner

Compounding SolutionsCompounding Solutions Defend Rx PA2000

Compatible Polymers & Resins:Polyamides, Acrylics, Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Thermoplastic Elastomers (TPE), Polycarbonates (PC), Polyvinyl Chloride (PVC)
Functions:Anti-Microbial Agent
Processing Methods:Injection Molding, Extrusion
Carrier:Polystyrenes (PS), Resin-based
Features:Good Thermal Stability, Contamination Protection, Easier Processing, Cost Effective, Excellent Aesthetics, Bacteria Resistant, Service Life Extension, High Thermo-Oxidative Stability, Good Stain Resistance, Low Odor
End Uses:Food Packaging, Medical/Healthcare Applications, Sporting Goods, Medical Gowns, Body Implants, Consumer Applications, Medical Reusable Masks , Housings, Filters, Electronic Accessory Cases, Medical Devices, Eyeglasses, Connectors

Defend Rx PA2000 is a PEBA Antimicrobial Masterbatch, 4wt.% LDR.

Elastocon® 8058N banner

Elastocon TPE TechnologiesElastocon® 8058N

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:1040.0 - 1040.0 kg/m³
Tear Strength:142.0 - 142.0 kN/m

Elastocon® 8058N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8058N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058N can be overmolded to polypropylene.Elastocon® 8058N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Elastocon® 2865PE banner

Elastocon TPE TechnologiesElastocon® 2865PE

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Coextrusion, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:890.0 - 890.0 kg/m³

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Elastocon® STK40B banner

Elastocon TPE TechnologiesElastocon® STK40B

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:1130.0 - 1130.0 kg/m³

Elastocon® STK40B is a black thermoplastic elastomer that has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40B is well suited for consumer goods and industrial applications requiring non-slip/soft dry-touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK40B can be overmolded to PC, ABS, PC/ABS, Acrylic, PS, copolyester, various grades of polyamide, and more.Elastocon® STK40B is supplied as ready to use pellets in 50 lb. bag quantities.

Elastoflo 30A-300 banner

KMI GroupElastoflo 30A-300

Applications:Other Consumer Goods Applications, Medical Devices & Assemblies, Other Oil, Gas & Mining Applications
Product Families:Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers
Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
End Uses:Medical Devices, Automotive Interior Parts, Automotive Exterior Parts

Elastoflo 30A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Elastocon® 8058BL banner

Elastocon TPE TechnologiesElastocon® 8058BL

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:1040.0 - 1040.0 kg/m³
Tear Strength:138.0 - 138.0 kN/m

Elastocon® 8058BL is a black lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058BL is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058BL can be overmolded to polypropylene.Elastocon® 8058BL is supplied as ready to use pellets in 50 lb. bag and 1000 lb. quantities.

Elastocon® CLR65 banner

Elastocon TPE TechnologiesElastocon® CLR65

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:890.0 - 890.0 kg/m³
Tear Strength:34.65 - 34.65 kN/m

Elastocon® CLR65 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, high strength properties and a tactile surface finish. Elastocon® CLR65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR65 can be overmolded onto polypropylene.Elastocon® CLR65 is supplied as ready to use pellets in 1000 lb. quantities.

Elastocon® CLR40 banner

Elastocon TPE TechnologiesElastocon® CLR40

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:900.0 - 900.0 kg/m³
Tear Strength:25.025 - 25.025 kN/m

Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene.Elastocon® CLR40 is supplied as ready to use pellets in 40 lb. bag quantities.

Nano4 Bio PE EC MB 12 banner

Nano4Nano4 Bio PE EC MB 12

Chemical Family:Polyolefins, Polyethylenes
Functions:Anti-Static Agent
Labeling Claims:Bio-based
Carrier:Polyethylenes (PE), Resin-based

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

Flint Hills Resources® P4G3Z-039 banner

Melitek A/SFlint Hills Resources® P4G3Z-039

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding
Melt Flow Index:5.5 - 5.5 g/10 min

P4G3Z-039 is a Homopolymer uses Injection Molding for processing. It is produced with Phthalate free Catalyst Systems.

Flint Hills Resources® P4G4B-125A banner

Melitek A/SFlint Hills Resources® P4G4B-125A

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding
Additives Included:Anti-Static Agent
Melt Flow Index:12.0 - 12.0 g/10 min

P4G4B-125A is a Homopolymer uses Injection Molding. It is produced with Phthalate free Catalyst Systems.

Elastocon® STK60B banner

Elastocon TPE TechnologiesElastocon® STK60B

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:930.0 - 930.0 kg/m³
Tear Strength:138.0 - 138.0 kN/m

Elastocon® STK60B black thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60B is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60B can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60B is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® STK56PA banner

Elastocon TPE TechnologiesElastocon® STK56PA

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:1140.0 - 1140.0 kg/m³
Tear Strength:126.0 - 126.0 kN/m

Elastocon® STK56PA a colorable thermoplastic elastomer that has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA can be overmolded to polyamide/nylon.Elastocon® STK56PA is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® 8038N banner

Elastocon TPE TechnologiesElastocon® 8038N

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:1090.0 - 1090.0 kg/m³
Tear Strength:95.0 - 95.0 kN/m

Elastocon® 8038N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8038N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8038N can be overmolded to polypropylene.Elastocon® 8038N is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® 8088N banner

Elastocon TPE TechnologiesElastocon® 8088N

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:990.0 - 990.0 kg/m³
Tear Strength:50.225 - 50.225 kN/m

Elastocon® 8088N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8088N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8088N can be overmolded to polypropylene.Elastocon® 8088N is supplied as ready to use pellets in 50 lb. bags and 1000 lb. box quantities.

Compounding Solutions Defend Rx U1000 banner

Compounding SolutionsCompounding Solutions Defend Rx U1000

Compatible Polymers & Resins:Polyamides, Acrylics, Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Thermoplastic Elastomers (TPE), Polycarbonates (PC), Polyvinyl Chloride (PVC)
Functions:Anti-Microbial Agent
Processing Methods:Injection Molding, Extrusion
Carrier:Resin-based, Polyesters
Features:Good Thermal Stability, Contamination Protection, Easier Processing, Cost Effective, Excellent Aesthetics, Bacteria Resistant, Service Life Extension, High Thermo-Oxidative Stability, Good Stain Resistance, Low Odor
End Uses:Food Packaging, Medical/Healthcare Applications, Sporting Goods, Medical Gowns, Body Implants, Consumer Applications, Medical Reusable Masks , Housings, Filters, Electronic Accessory Cases, Medical Devices, Eyeglasses, Connectors

Defend Rx U1000 is an Universal Antimicrobial Masterbatch, 4wt.% LDR.

Elastocon® 8068N banner

Elastocon TPE TechnologiesElastocon® 8068N

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:1030.0 - 1030.0 kg/m³
Tear Strength:157.0 - 157.0 kN/m

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Elastoflo 60A-300 banner

KMI GroupElastoflo 60A-300

Applications:Other Consumer Goods Applications, Medical Devices & Assemblies, Other Oil, Gas & Mining Applications
Product Families:Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers
Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
End Uses:Medical Devices, Automotive Interior Parts, Automotive Exterior Parts

Elastoflo 60A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Flint Hills Resources® P4G4B-036 banner

Melitek A/SFlint Hills Resources® P4G4B-036

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding
Additives Included:Anti-Static Agent
Melt Flow Index:12.0 - 12.0 g/10 min

P4G4B-036 is a Homopolymer used for Injection Molding. It is produced with Phthalate free Catalyst Systems.

Elastocon® 2880L banner

Elastocon TPE TechnologiesElastocon® 2880L

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:900.0 - 900.0 kg/m³
Tear Strength:39.725 - 39.725 kN/m

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® 2855 banner

Elastocon TPE TechnologiesElastocon® 2855

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Consumer Applications, Medical Devices
Density:890.0 - 890.0 kg/m³
Tear Strength:122.0 - 122.0 kN/m

Elastocon® 2855 thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2855 is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2855 can be overmolded onto polypropylene.Elastocon® 2855 is supplied as ready to use pellets in 50 lb. bag quantities.

Diamond Plastics GmbH DiaPow PP banner

Diamond Plastics GmbHDiamond Plastics GmbH DiaPow PP

Polymer Name:Polypropylene (unspecified)

Diamond Plastics DiaPow PP is polypropylene laser sinter powder.

Elastocon® 2810 banner

Elastocon TPE TechnologiesElastocon® 2810

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:890.0 - 890.0 kg/m³
Tear Strength:33.0 - 33.0 kN/m

Elastocon® 2810 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2810 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2810 can be overmolded onto polypropylene.Elastocon® 2810 is supplied as ready to use pellets in 40 lb. bag quantities.

Elastoflo 90A-300 banner

KMI GroupElastoflo 90A-300

Applications:Other Consumer Goods Applications, Medical Devices & Assemblies, Other Oil, Gas & Mining Applications
Product Families:Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers
Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
End Uses:Medical Devices, Automotive Interior Parts, Automotive Exterior Parts

Elastoflo 90A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Elastocon® STK60 banner

Elastocon TPE TechnologiesElastocon® STK60

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:920.0 - 920.0 kg/m³
Tear Strength:145.0 - 145.0 kN/m

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

Elastocon® 2825 banner

Elastocon TPE TechnologiesElastocon® 2825

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:890.0 - 890.0 kg/m³
Tear Strength:56.0 - 56.0 kN/m

Elastocon® 2825 thermoplastic elastomer compound has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2825 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2825 can be overmolded onto polypropylene.Elastocon® 2825 is supplied as ready to use pellets in 40 lb. bag quantities.

Elastocon® 8078NL banner

Elastocon TPE TechnologiesElastocon® 8078NL

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:1020.0 - 1020.0 kg/m³
Tear Strength:32.39 - 32.39 kN/m

Elastocon® 8078NL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a scratch and mar resistant surface finish. Elastocon® 8078NL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078NL can be overmolded to polypropylene.Elastocon® 8078NL is supplied as ready to use pellets in 1000 lb. quantities.

Nano4 BioPE EC 12 banner

Nano4Nano4 BioPE EC 12

Additives Included:Carbon Black

Nano4 BioPE EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Elastocon® 8078B banner

Elastocon TPE TechnologiesElastocon® 8078B

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:1020.0 - 1020.0 kg/m³
Tear Strength:38.85 - 38.85 kN/m

Elastocon® 8078B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078B can be overmolded to polypropylene.Elastocon® 8078B is supplied as ready to use pellets in 1000 lb. quantities.

GreenTEC Pro Carbon carbon banner

ExtrudrGreenTEC Pro Carbon carbon

Density:1200.0 - 1200.0 kg/m³

GreenTEC Pro Carbon carbon is a biopolymer made from renewable resources with10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance. In addition, the raw material is approved according to the REACH- and RoHS-Standards.

Elastocon® 8028N banner

Elastocon TPE TechnologiesElastocon® 8028N

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Injection Molding, Blow Molding, Extrusion
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications, Consumer Applications, Medical Devices
Density:1050.0 - 1050.0 kg/m³
Tear Strength:76.0 - 76.0 kN/m

Elastocon® 8028N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8028N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8028N can be overmolded to polypropylene.Elastocon® 8028N is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® CLR75 banner

Elastocon TPE TechnologiesElastocon® CLR75

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Extrusion, Injection Molding, Blow Molding
End Uses:Consumer Applications, Medical Devices, Medical/Healthcare Applications, Tubing, Surgical Instruments, Industrial Applications
Density:890.0 - 890.0 kg/m³
Tear Strength:200.0 - 200.0 kN/m

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

Elastocon® 2860L banner

Elastocon TPE TechnologiesElastocon® 2860L

Polymer Name:Thermoplastic Elastomer (unspecified)
Processing Methods:Blow Molding, Extrusion, Injection Molding
End Uses:Medical/Healthcare Applications, Tubing, Surgical Instruments, Consumer Applications, Medical Devices
Density:880.0 - 880.0 kg/m³
Tear Strength:124.0 - 124.0 kN/m

Elastocon® 2860L is a translucent lubricated thermoplastic elastomer that has been developed for applications that require rubber-like properties, a good surface finish, and a reduced coefficient of friction. Elastocon® 2860L is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2860L can be overmolded onto polypropylene.Elastocon® 2860L is supplied as ready to use pellets in 50 lb. bag quantities.

Show

of 51 results