Products in Institutional & Industrial Care: Clean-in-place Cleaners

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Plurafac® LF 900 is a surfactant composed of 5% surfactant in a 25% solution of BDG, which provides excellent foam control and good wetting. It is listed on the EPA’s Safer Chemical Ingredients List, and its benefits include defoaming and foam control, as well as wetting and low foam properties.

Lutropur® MSA is a high-purity, readily biodegradable, and less corrosive strong acid with a low vapor pressure and a high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also with Trilon® M (a chelating agent) on many scales. It is an excellent product for removing dye or pigment-type soils. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Trilon® M Liquid T is a readily biodegradable liquid product with an approximately 40% active concentration. It improves cleaning performance with stubborn stains such as natural fats, sebum, blood, milk, ink, and dingy soils. It also shows excellent stain removal performance in laundry detergents and can be used in both alkaline and acidic formulations.

Dehypon® LT 104 is a low-foaming surfactant with marked wetting power. It can be used in low-foaming industrial cleaners, machine-dishwashing agents, and formulations based on sodium hydroxide or phosphoric acid where conventional fatty alcohol polyglycol ethers are not sufficiently stable during storage.

Trilon® BX Liquid is used to soften water and to remove alkaline earth and heavy metal impurities. It is often incorporated in detergents and cleaners for household and industrial uses. Available both as 40% active liquid and 85% active powder.

Korantin® MAT is a clear yellow/brown liquid recommended for neutral to alkaline conditions. It is readily biodegradable and soluble in alcohols and dilute caustic solutions (i.e. 10% soluble in 5% caustic solution). The prduct finds applications in vehicle and transportation care, food and beverage processing etc.

Plurafac® LF-224 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Trilon® BX Powder is the tetrasodium salt of ethylenediaminetetraacetic acid (EDTA-Na4) in solid form and of high purity. It plays an active role in removing many types of soil and boosting the detergency of laundry detergent by sequestering heavy metals. Furthermore, it can be used in all types of cleaner and degreaser formulations for I&I applications, with 84% active powder.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Good performance for cleaning and foam control. Suitable for high-temperature cleaning (greater than 60°C). The cloud point is 30°C, so it has very low foaming above that temperature, which is ideal for carpet extraction operating temperatures (typically 35 to 50°C). Listed on the EPA's Safer Chemical Ingredients List, it is a low-foaming fatty alcohol EO/PO derivative.

Trilon® B Liquid is a 40% aqueous solution of tetrasodium ethylenediamine tetraacetate (Na4EDTA). It plays an active role in removing many types of soil and boosting the detergency of laundry detergent by sequestering heavy metals. Furthermore, it can be used in all types of cleaner and degreaser formulations for I&I applications.

Luvipur® FM 85 is a liquid product with a concentration of 85%. It can be utilized as a neutralizer or acidifier and has a high dissolving power on different metal scales. It is fully stable in non-oxidizing formulations and readily biodegradable. It finds applications in cleaning in place and manual dishwashing.

Lutensol® TO 89 is suitable for both manual and machine floor cleaning. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching. It is an effective NP-9 replacement in commercial laundry, with a cloud point of 60°C and moderate foam. Blends of Lutensol TDA 6 and 9 provide synergistic cleaning for dirty motor oil and dust sebum stains.

Trilon® M Granules SG T are granular products with over 76% active concentration and are readily biodegradable. It is listed on Safer Choice and is 30% more efficient than EDTA. It improves cleaning performance with stubborn stains. Flexible application in alkaline and acidic formulations

Plurafac® LF 303 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Sokalan® DCS is a potential laundry sour alternative to succinic acid. It is a mixture of dibasic acids and is sold in flakes, with a concentration of approximately 100%. It can be used as a rinse aid and ADW machine cleaner component in solid formulations. Therefore, it is recommended for use in solid/powder formulations.

Plurafac® CS-10 is a low-foaming anionic surfactant with high temperature stability and excellent caustic solubility (up to 35% NaOH and 50% KOH solution). It is highly recommended for bleach-free alkaline CIP cleaners or any low-foam formulation. Its benefits include low-foam cleaning and the ability to provide low-foaming solutions.

AG 6206 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

AG 6202 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

Berol DGR 81 is an environmentally improved non-ionic surfactant blend with very good degreasing properties.

Ethylan 1005 is a nonionic surfactant based on a synthetic primary alcohol.

Dissolvine M-X is a high purity, versatile and readily biodegradable chelate. It can replace phosophorous-containing builders, enhance the cleaning power of a detergent, and prevent deactivation of surfactants in hard water. The active component is MGDA, a chelating agent with three carboxylic groups. Together with the central nitrogen atom these carboxylic groups provide strong multiple bonds with di- and trivalent metal ions. The small molecular size enables rapid action at low temperatures and in short contact time. The MGDA trisodium salt is fully REACH registered. Excellent low toxicity and low eco-toxicological permit non-dangerous labelling. MGDA-Na3 is listed on EPA’s Safer Chemical Ingredients List in the United States. As an ingredient in cleaning formulations, the MGDA in Dissolvine M-X improves the descaling and cleaning capabilities. This includes whiteness and color care benefits in laundry and stain removal abilities in automatic dish washing (ADW). Since MGDA is also a strong chelating agent for heavy metal ions, such as Fe and Cu, it enhances product stability and prevents negative effects of transition metals.

Ethylan TB345 is an alkoxylated defoamer polymer with outstanding defoaming action.

Berol LFG 61 is a alcohol ethoxylate and alkylglucoside mix, complete surfactant package, low foaming nonionic surfactant blend.

Berol 840 is a low foaming narrow range non-ionic surfactant based on a synthetic alcohol.

Ethylan 1008 is a nonionic surfactant based on a synthetic primary alcohol.

AG 6210 is a non-ionic surfactant, alkyl glucoside. It is based on a blend of short chain fatty alcohols and glucose. AG 6210 soluble in water and propylene glycol and dispersible in 2-propanol. It can be used as a: Corrosion inhibitor Dispersing agent Foam booster Degreaser

Dissolvine M-40 has an assay of min. 81 weight percent. MGDA has three carboxylic groups and, together with the central nitrogen atom, these carboxylic groups provide strong multiple bonds with divalent and trivalent metal ions. The small molecular size enables rapid action at low temperatures and short contact time. The MGDA trisodium salt is fully REACH registered. The excellent low toxicity and low ecotoxicological profile allow for non-dangerous labeling. MGDA-Na3 is listed on EPA’s Safer Chemical Ingredients List in the United States. MDGA is a strong chelate for hard water and transition metal ions. Using MGDA as an ingredient in cleaning formulations improves the descaling and cleaning capabilities. This includes whiteness and color care benefits in laundry and stain removal abilities in automatic dish washing (ADW). Since MGDA is also a strong chelating agent for heavy metal ions, such as Fe and Cu, it enhances product stability and prevents negative effects of transition metals.

Ethylan 1003 is a nonionic surfactant based on a synthetic primary alcohol.

Berol 087 is a non-ionic surfactant based on n-primary alcohol. It has a hydrophilic (water soluble) character.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Ethylan 1008W is a nonionic surfactant based on a synthetic primary alcohol.