Products in Food Facility Cleaning & Sanitization: Dispersing

STEOL® CA-460 is a 60% active synthetic 3-mole ammonium laureth sulfate renowned for its excellent foaming and foam stability properties. This anionic surfactant, containing ethanol, maintains clarity and fluidity at room temperature. Its applications encompass liquid laundry detergents, car and truck washes, dishwashers, industrial foaming, scouring, leveling, and coupling in textile and metalworking applications.

MAKON® OP-9 is a nonionic surfactant with versatile applications in agricultural, dilutable hard surface cleaners, and industrial formulations. It operates as an emulsifier, detergent, dispersant, and wetting agent, catering to a wide range of needs. Belonging to the chemical group of octyl phenol ethoxylates, its functions encompass acting as an emulsifier, an adjuvant, and a wetting agent. It's important to note that this product is also certified as kosher.

MAKON® P104 is a nonionic eo/po block copolymer that excels in oil-in-water emulsification. Its application spans across multiple industries, including agriculture, industry, paints, and coatings. Its contribution is prominent in agricultural pesticide formulations, as well as serving as a dispersant and oil-in-water emulsifier.

NINATE® 411 is an isopropyl amine salt of branched alkylbenzene sulfonic acid. It is an anionic surfactant used in the manufacture of latex. It also finds application in a variety of agricultural formulations and in oil- and solvent-based systems. It is kosher-certified.

BIO-SOFT® 411-E is an anionic surfactant catering to applications in degreasers, laundry pre-spotters, and other i&i (industrial and institutional) cleaners. It falls under the alkyl benzene sulfonates sulfonates chemical group and serves functions as a dispersant, emulsifier, and adjuvant. The product is certified kosher.

AMMONYX® LO SPECIAL is a naturally derived lauramine oxide surfactant that plays diverse roles across personal care, household, and industrial products. It serves as a foam enhancer, viscosity builder, and emulsifier in personal care formulations. Moreover, it functions as a lubricant in textile applications.

MAKON® P105 is a nonionic eo/po block copolymer that exhibits good oil-in-water emulsification properties. It can be used in a variety of markets, including agriculture, industrial, and paints and coatings. Applications for best fit are agricultural pesticide formulations, dispersants, emulsifiers, and industrial cleaning.

MERPOL® A is an alcohol phosphate that offers attributes such as low foam generation, effective wetting, and reliable emulsification. It serves a range of applications, including metal processing, composite handling, printing ink manufacturing, and coatings. Classified within the chemical group of alcohol phosphate esters, its functions encompass being a plastic anti-static agent, pigment dispersant, and textile lubricating agent.

MAKON® 17R4 stands as a nonionic reverse eo/po block copolymer that exhibits fast-breaking, low foaming, defoaming properties, and strong detergency. Its applicability spans numerous markets, from industrial and institutional to pulp and paper and textiles. It can be utilized in metalworking fluids, dispersants, industrial lubricants, agricultural pesticide formulations, and low foaming detergents. Like other products in the makon® line, it is a low ash product.

AMMONYX® LO-A is an amphoteric surfactant with applications in personal care and hi&i as a foam enhancer, viscosity builder, and emulsifier. It can also act as a lubricant in textile applications. It is produced and available for use in the asia-pacific region.

STEOL® CS-270 is a concentrated 70% active flowable paste comprising 2-mol sodium laureth sulfate. Its versatile application includes detergents, dishwashers, laundry products, shampoos, bath products, liquid hand soaps, and industrial cleaners. This anionic surfactant excels in producing foam regardless of water hardness, with skin irritation properties being minimal. It is also beneficial as an additive and scouring agent in textile and agricultural applications.

STEOL® CS-270 C is a high-active, concentrated paste at 70% activity level. This 2-mole sodium laureth sulfate functions effectively across various applications, including detergents, dishwashers, laundry products, shampoos, bath products, liquid hand soaps, and industrial cleaners. Its robust foaming capacity remains consistent irrespective of water hardness, and its low skin irritation properties are noteworthy. Furthermore, it is suitable as an additive and scouring agent in textile and agricultural applications.

AMMONYX® LO is a lauramine oxide that finds applications in personal care, hi&i applications as foam enhancers, viscosity builders, and as emulsifiers and lubricants in textile applications. It offers long-lasting foam. This product meets the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEOL® CS-460 is a 60% active, synthetic 3-mole sodium laureth sulfate featuring excellent detergent and foaming properties. This anionic surfactant's ethanol content lends clarity and fluidity at room temperature. Its versatility spans shampoos, laundry detergents, h&i cleaners, textile mill keir boiling and bleaching formulations, textile detergents, and various agricultural applications.

BIO-SOFT® N-411 is an anionic surfactant in the form of an isopropyl amine salt of linear alkylbenzene sulfonic acid. Its oil solubility and water dispersibility render it ideal for emulsion degreasers, laundry prespotters, dry cleaning products, paint strippers, hard surface cleaners, and as an emulsifier for petroleum-based solvents.

Glucopon® 600 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It works in combination with fatty soap to act as a mild degreaser and a foaming/stabilizing surfactant. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has a synergistic effect with lactic acid to increase the clean plate count. Furthermore, it contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Glucopon® 625 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It functions as a mild degreaser and foaming/stabilizing surfactant, is listed on Safer Choice, and is 100% natural carbon. It is mild to the skin and can synergistically reduce skin irritation caused by anionic surfactants. It has synergy with lactic acid to increase the dish clean plate count and contains no biocide for preservation. Additionally, it is listed on the EPA's Safer Chemical Ingredients List.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Sokalan® CP 12 S is a dispersing ingredient that functions as a performance booster and is available as an approximately 50% unneutralized liquid. The applications of Sokalan® CP 12 S include dishwashing, food service and kitchen hygiene, and commercial laundry.

Sokalan® PA 30 is an acrylic acid homopolymer with excellent performance properties. The product has good dispersancy, helping to prevent the redisposition of suspended soils back onto surfaces, and is a dispersing agent that can be used for both organic and inorganic solids.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Sokalan® CP 10 is a dispersing ingredient that functions as a performance booster and is available as a fully neutralized version (pH approximately 8.5) in approximately 45% liquid form. This product finds applications in hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and vehicle and transportation care.

Trilon® M Liquid T is a readily biodegradable liquid product with an approximately 40% active concentration. It improves cleaning performance with stubborn stains such as natural fats, sebum, blood, milk, ink, and dingy soils. It also shows excellent stain removal performance in laundry detergents and can be used in both alkaline and acidic formulations.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Trilon® BX Powder is the tetrasodium salt of ethylenediaminetetraacetic acid (EDTA-Na4) in solid form and of high purity. It plays an active role in removing many types of soil and boosting the detergency of laundry detergent by sequestering heavy metals. Furthermore, it can be used in all types of cleaner and degreaser formulations for I&I applications, with 84% active powder.

Sokalan® CP 42 is a scale inhibitor for automatic dish wash detergents, particularly effective agianst Ca-phosphate. It is composed of modified polycarboxylate and is appears as clear to turbid liquid of 40% concentration. The product boosts detergency overcoming deficiencies seen when phosphates are removed from formulations.

Glucopon® 420 UP is 100% derived from renewable resources. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention, little to no streaking, and excellent plastic compatibility. This product contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Lutensol® TDA 9 is a versatile non-ionic surfactant that serves as a workhorse for laundry applications. Its hydrophobe is derived from a natural fatty alcohol, and it is available as approximately 100% active. The cloud point of this surfactant is 60°C. It offers excellent rapid wetting properties, relatively low foaming levels, and good detergency. In addition, it has the ability to function as an emulsifier, dispersant, and solubilizer.

Trilon® M Granules SG T are granular products with over 76% active concentration and are readily biodegradable. It is listed on Safer Choice and is 30% more efficient than EDTA. It improves cleaning performance with stubborn stains. Flexible application in alkaline and acidic formulations

Ethomeen O/12 is a tertiary amine ethoxylate, based on a primary oleyl amine.

DeTERGE CS - 45LF is an exceptional, cost-effective, low-foaming surfactant resistant to chlorine. It's formulated for products containing up to 15% active caustic and other alkaline electrolytes. Chemically classified as an alkoxylated carboxylate, it's intended solely for use in alkaline systems and not recommended for acid systems.

KEBOPLEX VP 1212 is a bio dispersant for the treatment of cooling water circuits. It is an emulsion based on terpenes in water for dispersing organic impurities in process water systems and open recooling systems. This effectively prevents the formation of slime deposits on heat exchangers and condensers.

KEBOPLEX SC is a product for post-treatment of pickled and cleaned iron surfaces (flash rust removal) and Cleaning additive for highly alkaline solutions for cleaning evaporators in cane sugar factories.

KEBOSOL VD is an activator made of a specific combination of washing-active substances for alkaline and neutral solutions.

KEBOPLEX SP is a cleaning additive for highly alkaline solutions for cleaning evaporators in cane sugar factories.

Amphi® M is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-approved and REACH-registered, making it perfect for industrial use as a dispersant, emulsifier, and wetting agent. Amphi® M a number of exceptional attributes, including low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. It is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Additionally, it is non-GMO and palm oil-free, with a low carbon footprint.