Products in Other Institutional & Industrial Care: Corrosion Inhibitor

Cola®Fax 3386 is a 100% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubricating, hydrotroping, maintenance cleaning.

Cola®Liquid DT is a non-ionic 1:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT provides viscosity building and foam stabilizing properties. The product is liquid and very mild to eyes and skin. Cola®Liquid DT can be used as a substitute for 1:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT is effective in a wide variety of industrial products.

Cola® Cor 200 is a water-soluble carboxylate that is useful in a variety of metalworking, detergent, aerosol, and water-based coating applications. Aqueous solutions are low foaming, providing effective corrosion protection and surface activity in use treat levels (0.5 - 1.5%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater with triethanolamine. Cola®Cor 200 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally safe; does not contain boron, phosphates, chromates, nitrites or metallic cations.

Cola® Cor 232 is a low foaming amine carboxylate that is extremely eff ective in inhibiting the attack of ferrous metal by aqueous solutions in synthetic metalworking formulations. When blended with other materials to raise the pH, it becomes a very eff ective corrosion inhibitor in aqueous solution. Cola® Cor 232 may also be used for alkaline cleaners.

Cola® Cor CI-24 is a water-soluble, highly effective corrosion compound for use as corrosion inhibitor in aqueous systems. Cola® Cor CI-24 is diethanolamine free, yet provides a high amount of reserve alkalinity for good corrosion protection.

Cola®Mid 16 is a unique non-ionic surfactant for use in a variety of applications. Cola®Mid 16 has excellent corrosion inhibition properties on metal and has use in lubricants as both an emulsifier and a corrosion inhibitor. Cola®Mid 16 is also useful in preparing water-in-oil invert emulsions for polymerization, leading to high molecular weight polymers such as those used in water treatment. Cola®Mid 16 is also useful as a low HLB emulsifier in all continuous phase emulsions.

Cola® Cor 215 is unique amine carboxylate developed for aluminum and ferrous metals. Suitable for synthetic, semi-synthetic and soluble oil metalworking formulations. Used as short-term indoor corrosion inhibitor. Effective on steel and aluminum.

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants - especially nonionic surfactants - Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Cola® Cor 635 is a DEA-free fatty acid alkanolamide hat can be used as a corrosion inhibitor, lubricant, and secondary emulsifier for aqueous metalworking fluids. Cola® Cor 635 can be substituted for typical DEA-containing products used in synthetic and semi-synthetic systems. At use levels of 3-20%, Cola®Cor 635 offers superior corrosion protection and lubrication properties and can be combined with other anionic surfactants to create low-foaming systems. For emulsifiable oils, Cola®Cor 635 can be used to increase emulsion stability, corrosion protection, hard water stability, and storage life.

Cola®Fax 3375 is a 95% active phosphate ester. Cola®Fax 3375 is effective as a low foam detergent and hydrotrope. Any foam that is generated in use is fast breaking. Cola®Fax 3375 is especially effective in coupling low foam or capped nonionics into liquid alkaline cleaners.

Cola®Mulse CA-15 is a multifunctional amine alkoxylate used as an emulsifi er and lubricant in metalworking formulations. Cola®Mulse CA-15 may also used in textile applications for antistatic properties. The polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. Cola®Mulse CA-15 is substantive to metals, glass, textiles, plastics, and clays.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications. Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

Cola® Cor 298 is Low-foaming, optimized blend of carboxylic acids. Used primarily for ferrous metals, but not aggressive to non-ferrous. Suitable for synthetic, semi-synthetic and soluble oil metalworking formulations. Corrosion inhibitor for ferrous surfaces.

Cola®Liquid DCM is a DEA-free fatty amide blend designed for incorporation into most water dilutable products. In addition to corrosion inhibition, Cola®Liquid DCM provides high detergency for effective cleaning, and prevents soil from re-depositing after being loosened. The unique wetting properties are intended to allow dispersion over oily surfaces without creeping under and loosening flooring adhesives. The high viscosity of Cola®Liquid DCM delivers a thick, pleasing consistency for formulations, and the controlled foam provides satisfactory suds without disproportionate volume.

Cola® Cor 300 is a water-soluble carboxylate corrosion inhibitor designed for metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and provide effective corrosion protection at typical in use treat levels (0.5-1.0%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater. Cola®Cor 300 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally safe; does not contain boron, phosphates, chromates, nitrites or metallic cations.

Cola® Cor BCI is a water-soluble amine borate corrosion inhibitor. Usage level in product concentrate ranges from 5-25% by weight.

Cola® Cor 372 is used as a low-foaming corrosion inhibitor in metalworking fluids, in rolling emulsions and water-based hydraulic fluids. Cola® Cor 372 is insoluble in water.  Water soluble salts of Cola®Cor 372 are obtained by neutralization with alkanolamines and hydroxides and useful alone or combined with other water soluble corrosion inhibitors or lubricants. Alkanolamines salts derived from Cola® Cor 372 show excellent corrosion inhibition for steel and hard water stability.

Cola® Cor 400 is a water-soluble corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The performance properties of Cola® Cor 400 are not affected by water hardness, and aqueous films dry down to non-tacky residues. Cola® Cor 400 demonstrates more potent corrosion inhibiting properties than traditionally used carboxylic types. Cola® Cor 400 is currently being used successfully in low foam, alkaline spray washes for rust protection, as well as, for improved wetting/rinsibility at 0.1-0.3% active.

Cola®Cor 100 is a water-soluble amphoteric corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions provide effective corrosion protection at typical use concentrations (0.1 to 1.0%). ColaCor 100 has been used to provide rust inhibition properties in acidic and alkaline conditions. ColaCor 100 exhibits excellent tolerance for water hardness and contributes detergency in aqueous systems.

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT-2 is effective in a wide variety of household and industrial products.

DeTROPE CA-90 is a 90% active, anionic, mixed amine carboxylate recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It is also functions as a corrosion inhibitor for steel and aluminum in aqueous systems above pH 7.0. This product is 90% DeTROPE CA-100 and 10% DW, which reduces the solidification point to ~35F-40F, therefore making it easier to handle in cooler temperatures.

DeTROPE CA-100 is a low foaming, anhydrous, anionic mixed amine carboxylate. It is an excellent hydrotrope for use in aqueous and powdered alkaline systems. DeTROPE CA-100 is an effective corrosion inhibitor for aluminum and steel in aqueous systems above pH 7.0. For easier handling at colder temperatures, a 90% active version is available as DeTROPE CA-90.

DeTERGE AT-100 Acid Thickener is a versatile solution for both industrial and institutional (I&I) cleaning and home care applications. Ideal for acid cleaners, including those used in aircraft, and alkaline cleaners for home care, it stands out in various formulations. Applicable processes such as acid pickling and electroplating benefit from its efficiency.

DeCORE BE corrosion inhibitors are water-soluble, anionic, non-foaming amine borates. They are very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations.

DePHOS HP-739 Phosphate Ester is tailored for a spectrum of applications. In industrial and institutional (I&I) cleaning, it proves its efficacy in alkaline cleaners and degreasers, functioning as a corrosion inhibitor. In home care applications, it excels in alkaline cleaners and bottle wash solutions.

DeTERIC ODP-LF Sodium Octyliminodipropionate is a versatile ingredient with applications in various home care and industrial cleaning formulations. Its acid-stable and alkaline-stable features make it suitable for use in acid and alkaline cleaners, including aircraft cleaners, aluminum cleaners, asphalt cleaners, and cleaning concentrates.

DeCORE IMT-100LF Corrosion Inhibitor For Steel is a versatile solution for I&I cleaning and home care applications. With excellent lubricity and corrosion resistance, it enhances the performance of alkaline cleaners, detergents, and fluids & lubricants, particularly cutting oils and metalworking fluids. This biodegradable product is identified as a carboxylic acid derivative, functioning as a corrosion inhibitor in ferrous and non-ferrous applications.

DePHOS 8028 Phosphate Ester exhibits excellent properties such as fast wetting, low foaming, and good wetting properties, making it suitable for a wide range of applications. Its versatility in both I&I cleaning and home care, along with its corrosion inhibition and scale inhibition properties, makes it a valuable ingredient in various formulations.

DePHOS 4AL is a low to moderate foaming anionic phosphate ester in free acid form. Suggested for use as a lubricant, corrosion inhibitor, and emulsifier in metalworking applications. Highly effective for aluminum machining applications.

DePHOS 8028FA Aliphatic Phosphate Ester is designed for versatile applications. In industrial and institutional (I&I) cleaning, this ester functions as a corrosion inhibitor in both acid and alkaline cleaners, ensuring effective and safe cleaning. In home care, it excels in acid and alkaline cleaners, proving its efficacy in dish care, laundry, and various surface care applications.

DeTERIC CP-Na-38 High Foaming Amphoteric is a multifunctional ingredient, proves indispensable in various cleaning applications. Its acid-stable feature makes it a prime choice for acid cleaners, while its alkaline stability renders it effective in alkaline cleaners. With biodegradable properties, it ensures eco-friendly bowl cleaners. This amphoteric component acts as a corrosion inhibitor in detergents, ensuring high detergency in dishwash detergents and equipment cleaners.

MIRANOL JEM CONC from Solvay is a low foam wetting agent for industrial cleaners. It is stable in alkaline medium. Used for washing bottles and applications in the food industry or as a foaming agent and corrosion inhibitor in oilfield applications. Compliant with EU's detergent biodegradability regulation.

BURCO® RP-8888 is oil soluble and solvent extendable concentrate designed for use in formulating oil / solvent based rust preventive, lubricant, and penetrant. The product is a well-balanced blend of corrosion inhibitors, lubricant additives, and penetrating additives.

BURCOQUAT® TS-20 is a diethyl sulfate quat that exhibits excellent solubility and compatibility in acid and alkaline formulations including anionic surfactants.

SurPhase CLEAN 421 is Water soluble anionic surfactant that is alkaline stable and based on a phosphate ester with high acid number. Can be utilized in formulations as lubricant, coupling agent, defoamer, corrosion inhibitor, dispersing agent and anti-static agent