Products in Vehicle & Machinery: Cost Effective

BIO-SOFT® LFS-07 is a proprietary nonionic surfactant technology tailored for hard surface cleaners requiring a balance between low film/streak performance and heavy-duty cleaning capabilities. This surfactant facilitates effective cleaning of both glass surfaces and heavy grease buildup in a single cleaner. It is suitable for both ready-to-use (rtu) and concentrated cleaners.

BIO-TERGE® AS-40 SUPER is an anionic blend developed from sodium olefin sulfonate produced via stepan's falling film process. It is an ideal surfactant for various detergent and home care applications, including dishwashing detergents, laundry detergents, and all-purpose cleaning products. It offers excellent synergistic cleaning properties, particularly when combined with dodecylbenzene sulfonic acid, resulting in enhanced product performance and potential cost savings. Moreover, it exhibits greater stability than alcohol sulfates across a wide ph range.

BIO-TERGE® AS-90 BEADS is a high-active, spray-dried anionic surfactant that excels in wetting, foaming, and detergency. Its applications span household, personal care, and industrial contexts, including shampoos, liquid hand soaps, bath products, dust control, concrete and firefighting foams, suspension concentrates, suspoemulsions, and agricultural applications.

BIO-SOFT® LFS-04 features proprietary nonionic surfactant technology specially tailored for effective hard surface cleaning applications, particularly those requiring low film/streak performance. It's highly suitable for glass and floor cleaning. Its notably low critical micelle concentration (cmc) makes it ideal for concentrated formulations that necessitate high dilution rates. It's also compatible with ready-to-use (rtu) cleaners.

IGEPAL CA-520 is a nonionic surfactant that facilitates emulsification of non-polar hydrocarbon solvents and oils. Its applications encompass solvent emulsion cleaners, dry cleaning detergents, anti-icing additives for automotive gasoline, emulsifiers for pesticides, and floor polishes. It falls under the category of octyl phenol ethoxylates.

BIO-SOFT® S-120 is a c12.0 linear alkylbenzene sulfonic acid. Its anionic surfactant attributes include excellent detergency and compatibility with other anionic, amphoteric, and nonionic surfactants. Its high 2-phenyl content aids in maintaining clarity in liquid formulations with higher salt and active levels. Designed for a variety of hi&i cleaners, including acidic formulations, it extends its application to emulsifiable concentrates, concentrated emulsions, and suspoemulsions within the agricultural sphere.

BIO-SOFT® LD-190 is a concentrated blend of anionic and nonionic surfactants, serving as a suitable base for dishwashing, laundry, and household cleaning products. It imparts long-lasting flash foam and potent cleaning properties, making it well-suited for dilution into economy and intermediate formulations.

BIO-SOFT® S-101 is a c11.3 linear alkylbenzene sulfonic acid that delivers excellent detergency and compatibility with other anionic, nonionic, and amphoteric surfactants. Its versatile application encompasses various hi&i cleaning scenarios, including acidic formulations. This surfactant's utility extends to emulsifiable concentrates, concentrated emulsions, and suspoemulsions within agricultural contexts. Compliant with the u.S. Epa safer choice program's surfactant screen, it also makes an appearance on cleangredients.

Glucopon® 425 N is a mid-chain APG surfactant with moderate hydrotrope ability and high foam with good primary cleaning properties that is 100% derived from renewable resources. It has excellent gloss retention, low to no streaking, and excellent plastic compatibility, and won't damage even floor finishes. Furthermore, it is stable at high alkaline conditions and is an excellent option for wetting, although a defoamer may need to be used.

Glucopon® 625 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It functions as a mild degreaser and foaming/stabilizing surfactant, is listed on Safer Choice, and is 100% natural carbon. It is mild to the skin and can synergistically reduce skin irritation caused by anionic surfactants. It has synergy with lactic acid to increase the dish clean plate count and contains no biocide for preservation. Additionally, it is listed on the EPA's Safer Chemical Ingredients List.

Berol 226 is all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

Berol 266 is a narrow range non-ionic surfactant based on a synthetic primary alcohol with >80% linearity.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Petrolaid™ RDX is an innovative low pH organic salt technology that replaces traditional mineral and organic acids such as hydrochloric, citric, phosphoric, formic, sulfuric, and their blends. Petrolaid™ RDX uses an “on demand” technology that release the necessary amount of hydrogen ions (H+) to react with calcium scale and iron oxide to form water soluble ions, making Petrolaid™ RDX a preferable alternative to traditional acids with superior performance and cost advantages compared to several traditional acids. Petrolaid™ RDX is DOT non-regulated, non- fuming, non-corrosive to most metals, phosphate free, and a low contributor to BOD/COD in effluents.

H-Clean™ RDX is an innovative low pH organic salt technology that replaces traditional mineral and organic acids such as hydrochloric, citric, phosphoric, formic, sulfuric, and their blends. H-Clean™ RDX uses an “on demand” technology that release the necessary amount of hydrogen ions (H+) to react with calcium scale and iron oxide to form water soluble ions, making H-Clean™ RDX a preferable alternative to traditional acids with superior performance and cost advantages compared several traditional acids. H-Clean™ RDX is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate free, and a low contributor to BOD/COD in effluents.

VANTOCIL™ IB Antimicrobial is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers. This product is a 20% aqueous solution of poly (hexamethylene biguanide) hydrochloride (PHMB). VANTOCIL™ IB Antimicrobial is produced for use in industrial, institutional, agricultural, food, beverage, and domestic disinfection applications, primarily as a solid surface disinfectant, specifically for hospitals, veterinary establishments, dairies, milking parlors, breweries, air-conditioning units, and pasteurizers in canned food & beverage bottling plants.

DePHOS H66 - 872 is a potassium salt of an organic phosphate ester. It functions as a hydrotrope, particularly in acid and alkaline systems where low foam is preferred.

DeMULS DLN - 622EG is a concentrated solution utilized as a cost-effective emulsifier for D'Limonene. It enables the creation of D'Limonene micro-emulsion concentrates that exhibit a 'bloom' effect upon dilution.

DeCORE IMT - 100LF is a low-foaming, anionic, mixed amine carboxylate. It is recommended as a corrosion inhibitor for both ferrous and non-ferrous metals, offering effective protection while minimizing foam formation.

Accoquat® CS ULTRA NF is a unique nonflammable proprietary blend of cationic and nonionic emulsifiers and is especially designed for micro-emulsification of mineral seal oils (MSO) or other organic hydrophobes. Accoquat® CS Ultra NF can be used with both low and high boiling range mineral seal oils. It micro-emulsifies MSO effectively with ethylene glycol mono butyl ether (Butyl Cellusolve EB) as its coupling agent. Accoquat® CS ULTRA NF can produce micro-emulsions with MSO where the MSO concentration varies from 10-30%. Accoquat® CS ULTRA NF generally does not require additional emulsifiers or other nonionic surfactants to produce an easily dispersible, fine microemulsion. Upon dilution in water, its unique chemistry provides an infinitely dilutable, high-performance microemulsion with MSOs. It is manufactured in USA.

Accoquat® CS-4000 is a unique blend of cationic emulsifiers in a blended solvent system especially designed for micro-emulsification of formulations of mineral seal oils (MSO) or other organic hydrophobes. It micro-emulsifies MSO effectively with ethylene glycol mono butyl ether as its coupling agent. Accoquat® CS-4000 can produce micro-emulsions with MSO from 10-30% MSO concentration, (depending on the properties of the MSO), however is most cost effective from 15-30% MSO concentrations. Accoquat® CS-4000 generally does not require additional emulsifiers or other nonionic surfactants to produce an easily dispersible and fine micro-emulsion for rapid beading and spreading. With substantially less emulsifier it is very cost effective for ultra-type drying aids. Upon dilution in water, its unique blend of chemistries provides a consistently-functioning, high-performance, very fine micro-emulsion with MSOs. It is manufactured in USA.

Accoquat® CS-5000 is a blend of cationic emulsifiers designed to produce micro-emulsions when combined with mineral seal oil (MSO). These micro-emulsions are most often used as the basis for car rinse-aids and other post-wash treatments in commercial and home applications. It is manufactured in USA.

Zinador™ 22L is a 100% bio-based odor neutralizer that has been proven to effectively combat a wide range of household and industrial odors. Independent testing conducted by trained panelists has demonstrated its effectiveness in eliminating common malodors. With no need for emulsifiers or chelators in formulation, Zinador 22L is cost-effective and easy to use. It is developed and produced using Itaconix polymer technology.

BT DES is di-ethylhexyl sebacate and it applied in Corrosion inhibitor, Corrosion protection for steel and it have high thermal stability.

Multitrope™ 810 is a cost-effective liquid anionic surfactant that serves as an excellent hydrotrope. It demonstrates compatibility with a wide range of surfactants. Multitrope™ 810 is especially beneficial in formulations with high pH levels or high electrolyte concentrations. Its applications encompass automatic and hand dishwashing, fabric and laundry care, hard surface cleaning, industrial and institutional cleaning, and vehicle care.

Crosolv™ 30 is a remarkable low VOC green solvent known for its biodegradability, safety, and environmentally friendly properties. Specifically designed for household and I&I aqueous cleaning formulations, this solvent offers excellent performance against greasy soils even at low use rates of 0.3-3% when combined with non-ionic surfactants. Whether used neat or as a dilutable concentrate with higher surfactant levels, Crosolv™ delivers outstanding cleaning power while maintaining its eco-friendly characteristics.