Products in Equipment & Parts: Silicones

ELASTOSIL® R 402/60 US is a high-consistency silicone rubber (HCR) that is known for its high transparency and good mechanical properties. This product has a high green strength, making it suitable for the production of complex extruded profiles. Its vulcanizing characteristics allow for short cycle times in the manufacturing of rubber moldings through compression, transfer, and injection molding processes. The post-cured vulcanizates of this product are suitable for applications in the health care and food handling industries. ELASTOSIL® R 402/60 US is formulated with ingredients that are suitable for food contact applications, complying with Title 21 "Food and Drugs," Part 177.2600, which regulates rubber articles intended for repeated use. However, it is the responsibility of the user to ensure compliance with this regulation due to its limitations.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® LR 3015/50 A/B is a liquid silicone rubber. It is a paste-like, readily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high oil resistance. It is colored off-white and has moderate mechanical properties. Thanks to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® R Plus 4806/20 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is used for manufacturing molded articles. These vulcanizates generate a thin oil film with lubricating properties shortly after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products produced during curing.

ELASTOSIL® A59 Grey 01 is a self-leveling, one-component, amine-cure formulation that cures at room temperature by reaction with air humidity to form a flexible and durable silicone elastomer. It is particularly suited for screen printing on gaskets. The curing rate can be accelerated by heat exposure or exposure to carbon dioxide concentrations above 1% p.b.v.

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® LR 3040/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3003/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

WACKER® AK 500 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500,000 mm²/s. This product is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. As a result, WACKER® AK 500 000 STAB is highly suitable for applications involving high temperatures and/or shear stress. Its unique formulation ensures the stability and performance of the silicone fluid in demanding conditions.

ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

ELASTOSIL® R Plus 4846/30 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is utilized in the production of molded articles. The vulcanizates generated from this compound develop a thin oil film with lubricating properties soon after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products formed during the curing process.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

ELASTOSIL® LR 3003/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3005/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3004/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3065/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.