Products in Equipment & Parts: Good Mechanical Properties

910 Products found in Equipment & Parts

Wacker Chemie AGELASTOSIL® LR 3005/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Vibration Dampers, Batteries
Features:Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:22.0 - 22.0 kN/m

ELASTOSIL® LR 3005/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AGELASTOSIL® LR 3043/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
Features:Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Heat Stabilized, Food Contact Acceptable
Tear Strength:8.0 - 8.0 kN/m

ELASTOSIL® LR 3043/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3846/30 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:19.0 - 19.0 kN/m

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3005/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Cables, Automobile Door Seals, Vibration Dampers, Batteries
Features:Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:28.0 - 28.0 kN/m

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AGHDK® N20

INCI Name:Silica
Chemical Name:Pyrogenic Silica
CAS Number:112945-52-5
Functions:Rheology Modifier, Extender, Filler, Thixotrope, Viscosity Modifier, Reinforcement, Thickener
Chemical Family:Silica
Synonyms:Fumed Silica, Silica, Silicon Dioxide

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

Wacker Chemie AGELASTOSIL® R 427/30

Polymer Name:Silicone Elastomer
Processing Methods:Extrusion, Compression Molding, Injection Molding
End Uses:Door Profiles, Profiles, Medical/Healthcare Applications
Features:Tear Resistance, High Tensile Strength, Good Mechanical Properties, High Strength, Shorter Cycle Time, Good Tear Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:30.0 - 30.0 kN/m

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

Wacker Chemie AGELASTOSIL® LR 3040/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Household Goods, Automobile Door Seals
Features:Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility
Tear Strength:12.0 - 12.0 kN/m

ELASTOSIL® LR 3040/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

Wacker Chemie AGELASTOSIL® LR 3170/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Liquid Injection Molding, Injection Molding
End Uses:Automobile Door Seals
Features:Low Volatility, Fast Curing, Good Mechanical Properties, Low Flammability, Flame Retardant, Low VOC, Cost Effective, Heat Resistance, Good Electrical Properties
Tear Strength:23.0 - 23.0 kN/m

ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® R 427/70

Polymer Name:Silicone Elastomer
Processing Methods:Extrusion, Compression Molding, Injection Molding
End Uses:Door Profiles, Profiles, Medical/Healthcare Applications
Features:Tear Resistance, High Tensile Strength, Good Mechanical Properties, High Strength, Shorter Cycle Time, Good Tear Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:35.0 - 35.0 kN/m

ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

Wacker Chemie AGELASTOSIL® LR 3003/70 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:20.0 - 20.0 kN/m

ELASTOSIL® LR 3003/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3842/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:37.0 - 37.0 kN/m

ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3852/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Low Volatility, Good Mold Release, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Cut Through Resistant, Enhanced Tear Resistant, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:40.0 - 40.0 kN/m

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

Wacker Chemie AGELASTOSIL® R Plus 4806/20 MH

Polymer Name:Silicone Elastomer
End Uses:Automotive Connector Seals
Features:Excellent Lubricity, Heat Stabilized, High Bleed Resistant, Fast Curing, Good Mechanical Properties, High Consistency
Tear Strength:15.0 - 15.0 kN/m

ELASTOSIL® R Plus 4806/20 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is used for manufacturing molded articles. These vulcanizates generate a thin oil film with lubricating properties shortly after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products produced during curing.

Wacker Chemie AGELASTOSIL® LR 3844/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:24.0 - 24.0 kN/m

ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3065/30 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Batteries
Features:Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:24.0 - 24.0 kN/m

ELASTOSIL® LR 3065/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AGELASTOSIL® LR 3842/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:38.0 - 38.0 kN/m

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3003/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:30.0 - 30.0 kN/m

ELASTOSIL® LR 3003/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3004/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Vibration Dampers
Features:Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:25.0 - 25.0 kN/m

ELASTOSIL® LR 3004/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3003/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Plugs, Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:27.0 - 27.0 kN/m

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® R Plus 4846/30 MH

Polymer Name:Silicone Elastomer
End Uses:Automotive Connector Seals
Features:Excellent Lubricity, Heat Stabilized, High Bleed Resistant, Fast Curing, Good Mechanical Properties, High Consistency
Tear Strength:34.0 - 34.0 kN/m

ELASTOSIL® R Plus 4846/30 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is utilized in the production of molded articles. The vulcanizates generated from this compound develop a thin oil film with lubricating properties soon after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products formed during the curing process.

Wacker Chemie AGELASTOSIL® LR 3040/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Household Goods, Automobile Door Seals
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:11.0 - 11.0 kN/m

ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).

Wacker Chemie AGELASTOSIL® LR 3003/80 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Vibration Dampers, General Purpose
Features:Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility
Tear Strength:12.0 - 12.0 kN/m

ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® R 402/60 US

Polymer Name:Silicone Elastomer
Processing Methods:Compression Molding, Injection Molding, Transfer Molding
End Uses:Door Profiles, Profiles, Medical/Healthcare Applications
Features:High Tensile Strength, Good Extrusion Properties, Good Mechanical Properties, Shorter Cycle Time, Food Contact Acceptable, Good Green Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:35.0 - 35.0 kN/m

ELASTOSIL® R 402/60 US is a high-consistency silicone rubber (HCR) that is known for its high transparency and good mechanical properties. This product has a high green strength, making it suitable for the production of complex extruded profiles. Its vulcanizing characteristics allow for short cycle times in the manufacturing of rubber moldings through compression, transfer, and injection molding processes. The post-cured vulcanizates of this product are suitable for applications in the health care and food handling industries. ELASTOSIL® R 402/60 US is formulated with ingredients that are suitable for food contact applications, complying with Title 21 "Food and Drugs," Part 177.2600, which regulates rubber articles intended for repeated use. However, it is the responsibility of the user to ensure compliance with this regulation due to its limitations.

Wacker Chemie AGELASTOSIL® LR 3004/40 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Cables, Automobile Door Seals, Vibration Dampers
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:35.0 - 35.0 kN/m

ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3003/03 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, General Purpose
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:3.0 - 3.0 kN/m

ELASTOSIL® LR 3003/03 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3070/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Bathroom Accessories, Automobile Door Seals
Features:Cost Effective, Good Electrical Properties, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:23.0 - 23.0 kN/m

ELASTOSIL® LR 3070/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3005/30 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Vibration Dampers, Batteries
Features:Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:16.0 - 16.0 kN/m

ELASTOSIL® LR 3005/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AGELASTOSIL® LR 3162 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
Features:Fast Curing, Good Mechanical Properties, Low VOC, Cost Effective, Heat Resistance, Good Electrical Properties, Electrically Conductive, Low Volatility
Tear Strength:14.0 - 14.0 kN/m

ELASTOSIL® LR 3162 A/B is an electrically conductive liquid silicone rubber. It is a paste-like, two-component compound with short curing times. The vulcanizates are noted for good mechanical as well as electrical properties and for good heat resistance within a temperature range of -55°C to +210°C.

Wacker Chemie AGELASTOSIL® LR 3003/20 TR A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility
Tear Strength:24.0 - 24.0 kN/m

ELASTOSIL® LR 3003/20 TR A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3015/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Gaskets
Features:Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low Compression Set, Low VOC, Oil Resistant, Cost Effective
Tear Strength:12.0 - 12.0 kN/m

ELASTOSIL® LR 3015/50 A/B is a liquid silicone rubber. It is a paste-like, readily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high oil resistance. It is colored off-white and has moderate mechanical properties. Thanks to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AGELASTOSIL® LR 3844/30 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:22.0 - 22.0 kN/m

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3003/30 R A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Appliances, Cables, Garden Equipment, Gaskets, Automobile Door Seals, Lawn Equipment, Connectors
Features:Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable
Tear Strength:20.0 - 20.0 kN/m

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

Wacker Chemie AGELASTOSIL® LR 3074/60 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Radiator, Automobile Door Seals
Features:Cost Effective, Good Electrical Properties, Coolant Resistant, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:14.0 - 14.0 kN/m

ELASTOSIL® LR 3074/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3074 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3841/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:30.0 - 30.0 kN/m

ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AGELASTOSIL® LR 3004/50 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, Vibration Dampers
Features:Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:27.0 - 27.0 kN/m

ELASTOSIL® LR 3004/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AGELASTOSIL® LR 3003/90 A/B

Polymer Name:Liquid Silicone Rubber (LSR)
Processing Methods:Injection Molding
End Uses:Automobile Door Seals, General Purpose
Features:Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:8.0 - 8.0 kN/m

ELASTOSIL® LR 3003/90 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Show

of 910 results