Products in Chemical & Industrial Manufacturing: Epoxy & Epoxy Deriv...

Protal 600 CTE™ is a two-part high build coal tar epoxy, that can applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Vetronite® EGS 102 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green color with EP GC 201 G-10 Standards

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Addison Clear Wave Coatings TCL-104 is a thermal conductive heat curable epoxy adhesive obtained by cataionic polymerization. It is a one component boron nitride filled non- electrically conductive adhesive ready for use, solvent free, heat curing and thixotropic.

Sicomin SR GreenPoxy 28 / SD 3304 is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. SR GreenPoxy 28 Epoxy resin is produced with 28% of carbon originating from biomass. The combination of SR GreenPoxy 28 with SD 3304 hardener yields a low viscosity epoxy resin system of medium reactivity, with outstanding wetting-out properties on glass, carbon and aramid fibers. Due to its excellent impregnation properties, it is a preferred resin for the production of highly resilient composite fiber structures using filament winding technique, hand lay-up or pultrusion.

Duresco NU 463 V is a Glass fiber reinforced encapsulation epoxy molding compound with very good mechanical properties and excellent crack resistance.

Photomer® 3016-25G is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

VisiJet M5-X is a strong, rigid material with a hybrid ABS/polypropylene-like performance-and-feel that makes brilliant white parts. This material makes bright white parts that look like they've been injection molded. Parts made from this material are rigid, making it an excellent fit for packaging products including bottles, household plastics, piping, valves and other parts that call for stiffness.

Rhino Linings USA, Inc. 3102 Hardener is a Fast 4:1 Laminating and Tooling Hardener.

Formula 5000 combines high-strength epoxy resins with a dense loading of wear-resistant alumina and silicon carbide ceramic aggregate. Formula 5000, when applied as an easy-to-apply coating, is a cost-effective alternative to the installation of wear-resistant ceramic tile. Repairs to worn equipment made with Formula 5000 have a much longer wear life than the original part.

Razeen® SR 5074 is a Unmodified Bisphenol A based solid epoxy resin from type 5½ characterized by higher melt viscosity.

Wilko Paint Wilkopon Hs Recoatable Primer Gray Wilko No. 342.46 is a two-component epoxy, high build, epoxy-polyamide coating designed for fast dry and early or extended recoatability. It meets the Arizona Administrative Code Section R18-2-727. It also meets the Maricopa County Emission limits of 3.5#/gal for air-dried coating for metal parts and products. It is an epoxy-polyamide type.

PRF Composite Materials RP800 is an epoxy tooling prepreg system capable of withstanding temperatures up to 190°C after full post cure. RP800 is available in carbon and glass woven fabrics from 200 - 800 g/m2 impregnated with epoxy resin. RP800 prepreg allows high quality tooling laminates to be produced directly from a low temperature master model permitting a wide choice of master model materials. Using a low temperature vacuum bag and autoclave process for inital cure, the tool laminate can then be demoulded for freestanding post cure.

Coating & Binding Technology EMG‐17 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐17 provides precise alignment, high impact resistance and oil and chemical resistance to dynamic load equipment foundation applications.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

Razeen® SR 5197 is a solid, unmodified epoxy resin based on Bisphenol A.

Magna-Tac™ E645 is a two-part, thermosetting, formulated epoxy adhesive for bonding stack laminations used in stators, rotors, gyros, servomechanisms, synchros, transformers and magnetic amplifiers. It can also be used as an insulating varnish for impregnated coils and small electrical equipment. Bonding is achieved by heat. Only sufficient pressure to assure complete contact is needed.

EPIKOTE™ Resin MGS LR285 is a resin of a very good quality used for the aeronautics and for the production of models. The resin together with a hardener makes a very viscose blend which is why the fibers are quickly and very well saturated. Due to this, the product has lower weight and higher use value.

RESOLCOAT 7060 is an epoxy clear or pigmented Gelcoat. Which has improved UV resistance, room temperature cure & high gloss and choice of slow and fast hardeners. RESOLCOAT 7060 epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing. Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy. In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or colored version for tools or parts production.

Cridel ER120/EH435 is an epoxy based laminating resin tooling\pattern making.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

Adhesives Technology ACCU-CHOCK is a two-component, high-performance, high early and ultimate strength epoxy machine chock for use in high bearing areas with negligible shrinkage and creep, fast cure and excellent flowability. The recommended application temperature range is between 60°F - 95°F (16°C - 35°C).

Polygem 1004 Fast Set Wearing Compound is a very fast setting epoxy paste specially formulated for the sealing of cracked concrete prior to injection with epoxy or urethane resin systems. Polygem 1004 Fast Set Wearing Compound is an easy to mix 1 to 1 by volume ratio and will be ready for injection in as little as 35 minutes. is the preferred epoxy for use in occupied areas such as residential or institutional work areas. Polygem 1004 Fast Set Wearing Compound is a thick non-sag paste compound that will allow for vertical and overhead patching.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

SWANCOR 2596 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula. It is special-purpose high-rigidity and toughening product, which has better toughening properties than 2556 with light weight, excellent mechanical strength, heat resistance and corrosion resistance, etc.

Vetronite® FR-5 HF CTI 600M T is composed of epoxy resin and glass fabric reinforement.

Northern Industries Hydro Seal 75 is a high strength, hydrophobic, breathing type, two-component, modified epoxy coating manufactured from a balanced ratio of fillers, and water extended resins and hardeners. Our exclusive formula combines flexibility with the hardness of epoxy resins.

RESOLCOAT GC HT210 BLACK is a very high TG epoxy gelcoat specially formulated for the production of tooling and large structural composites parts requiring high glass transition temperature and services temperatures up to 210°C. This new generation system is suitable for the manufacture of large molds structures and composite parts. Laminates or molds can be released after a low temperature cure cycle (8h at 50°C).

NM Resin 094 together with NM Hardener 093 C is a low viscosity epoxy resin for manufacturing of sand molds and laminates. The resin can be accelerated with up to 10% of NM Accelerator 254. At increased amounts of accelerator, potlife and exotermic are affected. When having large molds, the accelerator should not be added.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

CM12 resin is Mid Tg, dicy-free fast cure, hot demoldable isothermal press curable resin system and it is suitable for sanding and metal composite hybrid part production. Drapability is suitable for press molds and low to medium tack optimized for press curing. Performance of prepreg system with CM12, capable of Class A Surface.

CHS-EPOXY 141 4F5 is a Modified by 5% of flow control agent.

GMS Composites EP-272 is a formulated epoxy resin film with long out life. The product has a versatile curing cycle from as low as 70°C or as high as 130°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-272 is a resin film available on a lightweight scrim or without a scrim. The EP-272 resin is compatible with EP270 pre-pregs. The resin film has good flow and the tack of EP-272 can be varied.