Products in Chemical & Industrial Manufacturing: Polyolefins

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Dissipative product based on Polypropylene copolymer (PPc). Unfilled.

Revolve M-748 Black is a rotational molding hexene (C6) polyethylene black grade designed to provide stiffness and mouldability without compromising impact resistance. The grade is suitable for large water and diesel tank applications. The grade carries TÜV and WRAS approvals.

Partly crystalline thermoplastic material with high toughness and chemical resistance, but lower compared to other plastics mechanical strength. Because of its high molar mass of approx. 4,500,000 g / mol is very good Wear resistance and vibration damping.

P5300 is a pipe grade HDPE, produced by the Mitsui CX Process P5300 combines exceptional processability with high creep resistance, high ESCR and excellent mechanical properties P5300 has MRS 11.2 MPa according to ISO 9080 and is designated PE 112 according to ISO 12162:1995

POWDER™ PE R 5935 is used in Street Furniture, Constructions (road barriers, rubbish chutes), Furniture (lamps, coat racks, chairs), Treatment of water (tanks, reservoirs, silos) and pots.

GLS Polymers PP 20%GF (CM) is Filled With 20% Glass Fiber.

Tefzel™ HT-2183 is a copolymer oftetrafluoroethylene andhexafluoropropylene. This meltprocessible fluoropolymer exhibitsexcellent resistance to heat, wearand chemicals.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Moharamplast MDPE MP4010-80 (Yellow) is recommended for pressure pipe systems in the applications field of natural gas where flexibility and coilability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

Eleme Petrochemical Company NGH045IU is a High Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with narrow molecular weight distribution to exhibit improved processability, excellent impact strength, stress crack resistance and UV stability for outdoor use at minimum warpage to injection molded parts like containers, dust bin, pails, Industrial Parts, bottle caps for mineral water.

Domolen® PPCG30 NC is a polypropylene copolymer, 30% glass fiber reinforced, for injection molding and has natural color.

Electrobiend PP-1800 is a low flow conductive polypropylene compound characterized by superb impact strength properties.

CENTROLEN / PP GF 30 is reinforced with 30% glass-fibers. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile and bending strength is increased up to 6.500 MPa and/or 5.500 MPa. PP GF 30-plastics are often used as fan blades or air filter housings.

N80A-E00 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

Sekisui Plastics NEOMICROLEN is non-cross-linked polypropylene foam sheet and non-cross-lined foamed sheets made from extruding polypropylene resin. A range of densities are available to meet various quality and packaging needs.

RG 1100 H is a Polypropylene Homopolymer. It is used in General Injection Molding, Closures, Caps

Best Plastic Management Propylene is used as a housing material for small electronic devices, molded parts for household appliances, body parts (bumpers) and molded parts in the interior of motor vehicles.

Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene.Elastocon® CLR40 is supplied as ready to use pellets in 40 lb. bag quantities.

BPI FormiFor Insulation is an exceptionally high quality product, meeting very specific packaging demands of the insulation, glasswool and stonewool products markets. Its lightweight structure uses up to 50% less material in comparison with other traditional packaging films, ensuring manufacturers benefit from an increased packing yield, and lower warehousing and transport costs per product.

Steinbeis PolyVert HDPE REGRIND COLORED is available both as regranulate and as regrind with innovative and sustainable production processes, for a wide variety of possible applications. Which is a recyclates of the highest quality.

TABOREN® PR 65 T 10S-089 is a PP/PE, Filler: Mineral filler, Stabilization: Antioxidant + UV + Anti-scratch

JSC Metaclay HPDE 153-10K is a composition of black color, resistant to thermo-oxidative aging during processing and operation, and also resistant to photo-oxidative aging during operation.

Smiths Metal Centers Ultra-high Molecular Weight PE is a high-quality engineering plastic materials. It is polyethylene with Ultra-high molecular weight.

PP flame retarded

TABOREX® TA 1132 HD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a TABOREX® Masterbatch containing the crosslinking catalyst a “SIOPLAS-SYSTEM”. Pipes which are produced with the SILON grade TABOREX® TA 1132 HD fulfill the requirements of ASTM F876, CSA 137.5,EN ISO 15875, BS 7291 and all related standards. This system allows the compound to be extruded as a normal thermoplastic polymer and will attain a high level of crosslinking in the processed form. The final product provides all the superior properties associated with crosslinked polyethylene.

Nanjing Hongrui Plastic Products P306 is used in textile equipment, engine blower, auto parts, electronic components. It is glass fiber reinforced type..

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process. Plastazote® 5SLD15BK-0522 is a low density polyethylene foam.

P4G4A-053 is a Homopolymer used for Injection Molding. It is produced with Phthalate free Catalyst Systems.

Nylacast Polypropylene is a light weight copolymer material with high impact ,stress cracking and chemical resistance. Not only does this material offer these characteristics but also exhibits great flexibility and toughness at low temperatures with low moisture intake.

KW 308A is a Copolymer Impact Polypropylene with 20% Talc Post-Consumer Resin. It's used for Injection Molding.

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.