Products in Chemical & Industrial Manufacturing: Pipes

ARMORSTAR VE IVSXH210 is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

Polynt Group 730-2295 - low profile resin for infusion and RTM applications; cosmetic or Class A finish. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® VUP-6800 - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Norsodyne® G-650STHY - thixotropic, preaccelerated, good workability. It is generally used in industrial sector applicatons.

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

EPOVIA OPTIMUM® KRF 2000 SE - Brominated Epoxy Resin based vinyl ester in styrene. It is used as general purpose in filament winding,vacuum injection,hand lay up and spray up,pultrusion method.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

Stypol® 040-8086 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Stypol® 040-8123 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Taishan Fiberglass T920H, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

D4-220-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

EASYLAM® LSE - Unsaturated polyester resin in styrene,special. It is used as general purpose in hand lay up and spray up method.

SKAPS LDB 3500 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Style 332 is 12.6 oz. per square yard (427.21 g/m2) 4 harness sating (crowfoot) weave fiberglass fabric.

1597 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

D3-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SKAPS LDB 2500 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Stypol® 040-5004 - resin for pigment paste formulation, monomer-free. It is generally used in inks and pigments applicatons.

DISTITRON® 167 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Norsodyne® CMI15100W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

1527 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

Taishan Fiberglass T910, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

DISTITRON® 183 CAV5F - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

SKAPS W 1100 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® PT-104 - isophthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.