Products in Chemical & Industrial Manufacturing: Tanks

Toray C740 is a cyanate ester resin system for cures at 135°C (275°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure the glass transition temperature can be increased to as high as 325°C (617°F).

Lavecoat OR is an orthoPhtalic gelcoat for general purposes. Easy to apply and with very good hiding power. It is suitable for parts with moderate external weather ability requirements.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Stypol® APVJ4001 - polyvinyl acetate low profile additive. For use in SMC, BMC, and pultusion. Class A surface and dimensional stability. Main applications areas are building and construction, home and domestic applications, industrial sector etc.

HTC™ 9510 is an E-Glass Fiber reinforced Bismaleimide (BMI) ESC® molding compound. It exhibits outstanding elevated temperature characteristics providing greatly extended service temperature range versus epoxy compounds for compression molding applications.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

SMCarbon® 24CF60-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SKAPS QM 3606 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Attshield 47 is a novolac epoxy vinyl ester resin that resists corrosion in a wide range of solvent, acidic, and slightly alkaline environments. This tough, high-strength resin is used to make fiberglass-reinforced laminates with high impact strength and resistance to a variety of mechanical stresses. This resin is ideal for filament winding and the production of products that require resistance to harsh environments and temperature changes. This resin has excellent wettability and curing properties as well.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

Polynt Group Polygel 33 - iso gel coat; good gloss retention and weatherability; resistant to water and osmotic blistering; also suitable for sanitary market. Main applications areas are composites, industrial sector etc.

Toray Toray Cetex® TC910 is a thermoplastic composite using a polyamide 6 (PA6) matrix resin. This product provides excellent mechanical performance at a good price-to-weight ratio. It features high strength and wear resistance and performs well at elevated temperatures. TC910 is also resistant to solvents. As a result of these attributes, Toray Cetex® TC910 is commonly used in a variety of automotive and transportation Applicationss. Secondary details in the final part may be injection overmolded using injection-grade polyamides. Toray Cetex® TC910 is available in glass or carbon reinforced UD tapes. Nylon 6-based Thermoplastic Composite. Indefinite at 25°C (77°F).

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

OPTIMOLD VUP-8341T is Filled resin,thixotropic,preaccelerated with low shrinkage and it is generally used in Industrial sector applicatons

NORSODYNE® H 15238 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

TYCOR® W4.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

D1-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

IM Carbon Fiber UD150H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

DISTITRON® 278 - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding method.

Ilkalem AS PV-300T is Bisphenol-A epoxy vinylester thixotropic resin for GRP applications.

Norsodyne® BR-290EXT - multicolor application, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

BS16 2400Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Divinycell is a high strength, closed cell, co-polymer foam with excellent insulation properties. It is especially suitable as insulation in low and cryogenic temperatures, featuring very low thermal conductivity. Resistance to hydrocarbons makes it the perfect material for LNG storage insulation. Divinycell has a long track record as insulation in LNG Carriers as well as bottom insulation in land based LNG storage tanks. A special grade, Divinycell CY, is approved rigid insulation for the GTT (Gas Transport & Technigaz) NO96 design both as insulating and supporting type and have exceptional compressive properties parallell to the plane. Easy cutting and machining is another attractive feature of the foam, appreciated by manufacturers and installers.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Polynt Group BMC S 1850 RF Structural is a bulk molding compound based on a blend of different thermoset resins, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC S 1850 rf. BMC S 1850 RF is certified V0 3,0 mm by UL laboratories. BMC S 1850 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group 781-6010 - toughened vinyl ester resinthat offers improved fracture toughness and crack resistance; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

AIREX® PXw is a closed-cell, fiber reinforced polymer foam panel with a special formulation and very high mechanical properties. The sophisticated manufacturing process evenly distributes continuous glass fibers with woven fabrics throughout the foam. This generates a product with enhanced mechanical properties in flexure (bending), allowing it to be used with or without face sheets.AIREX® PXw is dimensionally stable, does not lose strength when wet, and is resistant to chemicals and high emperatures. It is ideally suited as a material for static applications requiring high stiffness or as a replacement for wood and plywood.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.