Products in Chemical & Industrial Manufacturing: Flame Retardant

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Grade RT130M meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130M has excellent machining characteristics. Certification to IEC standard is pending.

Flamtard H (zinc hydroxystannate) is an insoluble, non-hazardous, antimony-free flame retardant synergist that inhibits the development of flames and smoke in polymers. In halogen-containing polymers, the material has both condensed and vapor phase action during combustion. At 220 °C, the material releases 15w% of water, then at higher temperatures (400 °C - 600 °C) zinc and tin ions exert catalytic activity that inhibits the radical chain reaction causing the flame. In halogen-free polymers Flamtard H can increase the char consistency and strength.

Flamtard S (zinc stannate) is an insoluble, non-hazardous, antimony-free flame retardant synergist, and is increasingly being used in green applications, particularly in the electronics industry. It is extremely effective in PVC systems for cable sheathing, epoxy resins for printed circuit boards, polyamides and surface coatings. Flamtard S is thermally stable up to 400 °C; at higher temperatures (400 °C - 600 °C) zinc and tin ions exert catalytic activity that inhibits the radical chain reaction causing the flame.

Santicizer® 1439 is a modified alkyl aryl phosphate ester for flexible PVC products that must meet stringent flame retardancy standards. Santicizer® 1439 is specially recommended for plastisol applications where lower viscosity is combined with high fire-retardancy of the end product.

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

NYCO6 851 Nylon is a low viscosity Nylon 6 resin used for general-purpose injection molding and compounding.

Charmax™ AR 57 is designed to eliminate or reduce Antimony Trioxide in flame retardant compounds, for the express purpose of reducing costs, while sustaining performance. Specific use rates will vary by application. For elimination of the price volatility and availability issues: Charmax™ AR 57 does not contain Antimony Trioxide. Charmax™ AR product line are produced from high quality raw material under carefully controlled conditioned to ensure product quality.

Cuyahoga Plastics AB5000 is a UV resistant, flame retardant, glass-reinforced polyester thermoset suitable for outdoor applications. Compression, transfer, and injection molding grades are available. It is currently supplied in bulk form, cut preforms, and box length extrusions.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

Charmax™ FS ZMT is a non-toxic flame retardant / smoke suppressant composed of a micro sized Zinc Molybdate complex coated onto Talc.

Grade RT130 meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130 has excellent machining characteristics. RT130 complies with IEC 61212-3-1 EP GC 23.

Charmax™ NH-5000 is a halogen-free intumescent flame retardant with high thermal stability and low water solubility based on synergistic phosphorus and nitrogen chemistries.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.

Charmax™ FS 12 is a non-toxic flame retardant / smoke suppressant based on a micro sized smoke suppressant complex coated onto propriety substrates.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Charmax™ FR Z30S is a flame retardant synergist for PVC applications. Charmax™ FR Z30S is specifically designed to partially or fully replace Antimony Trioxide in PVC applications such as wire & cable, coated fabrics, wallpaper and film.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

NYCOADAPT 2011 is a flexible Nylon copolymer TPE particularly suitable for both molding and extrusion applications. This copolymer possesses excellent processability and yields extremely tough and resilient finished articles.

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.