Products in Chemical & Industrial Manufacturing: Food Contact Accept...

SIMONA® PE 100 black 10024800 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

P&P Cream™ is the single instant solution for every plastic materials. It is used for injection molding machine, IMM rubber, extrusion lines and molds.

ALTAFLUOR® 480 UHP PFA (ultra high purity perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high purity requirements. Although HP PFA is available in a variety of resin grades, ALTAFLUOR® 480 UHP PFA tubing is made exclusively from a high molecular weight, high purity resin that provides excellent chemical resistance, (even to common fluorosurfactants), highest purity levels, low permeation levels and smoothest surface finish.

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Beograde INJ038 features biodegradable, high impact.

Black Masterbatch 945 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes, Fibers and Compound.

G-PAEK™ 1100PF is Ultra High performance thermoplastic polymer, unfilled Polyether Ketone, semi crystalline, fine powder for compression molding, standard flow, suitable for food contact application, color natural white.

RE-PLAS® PPA 150 plasticisers are saturated polyester resins used in the production of PVC compounds and rubber compounds, providing resistance to volatility, resistance to chemical extraction and migration. These polymeric plasticisers are long chain polyesters with high molecular weight which results in a stable, durable and long lasting plastic or rubber product.

Osterman & Company Inc. Osterlene® LLB100C (-B, -SA) is a general-purpose film grade linear low density polyethylene. This resin exhibits excellent toughness and strength when drawn down to thin gages.Suggested applications for LLB100C include blending resin applications, industrial packaging, co-extrusion, industrial liners and garment bags.LLB100C meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Polyplastics Group Topas® 7010F-600 is a robust film extrusion grade designed for blending with polyethylene (PE). It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in both cast and blown processes, and in monolayer and multilayer products. Leading film applications include twist wrap, forming webs, protective packaging, shrink films and labels, and easy tear packaging. Industrial uses include formed PE and PP sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.

Solprene 416 is a radial styrene/butadiene block copolymer having 30% of styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops properties of vulcanized rubber yet not requiring vulcanization.It is protected with a non staining antioxidant system; FDA approved, suitable for food contact applications and is essentially gel free with a clear color.Solprene 416 is used as elastomeric modifier for asphalt and plastics, as ingredient of soling formulations and as base for pressure sensitive adhesives.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Promyde® BF933 L is a high viscosity polyamide lubricated specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF933 L can be processed in cast and blown film extruders. Promyde® BF933 L is specially recommended in asymmetric estructures to minimize curling, specific recommendations are available on request.

PROFILAN Kunststoffwerk PROoil 9000 has excellent gliding properties and is self-lubricating.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Calprene 701 is a new 69/31 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 701 is a BHT* and nonylphenol free SBS, especially suitable for food contact applications.Calprene 701 offers good mechanical properties and shows a very good yellow index behavior.Calprene 701 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

White Nitrile Butadiene Rubber (NBR), 55-65 °IRHD. Copolymer of acrylonitrile and butadiene. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.Material formulated for repeated use in equipment associated with the production of foodstuffs intended for human consumption.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Black Masterbatch 4420 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes, Fibers and Compound.

CENTROLEN / PP GF 30 is reinforced with 30% glass-fibers. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile and bending strength is increased up to 6.500 MPa and/or 5.500 MPa. PP GF 30-plastics are often used as fan blades or air filter housings.

Fainplast Compounds PVC PH 70/AS is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Our FDA Grade ElastaPro ESS70FDA silicone sheeting is designed for food contact applications. It is easily die cut and provides a superior gasket and sealing solution. It is available from 25-85 durometer. Thicknesses from .010” to .500” thick. Widths up to 60” wide. Many colors are available but the most popular color in stock is white. Choose from our large inventory of stock items. If we do not have it in stock, we will custom make it.

CENTROMID 12 LE / PA 12 LE soft-plastics are often used as flexible hoses for screw and spiral conveyors in the food industry. During the modification with PA 12 LE soft, a special “food compliant” softener is added to the basic polyamide 12 polymer. The modification is also food safe. The resistance of the binding substance is reduced, the application temperature decreases to 130 °C. The tensile strength is reduced to 350 MPa.

Perlast® G75S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G75S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G75S is an all round material that can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Unlike other FDA compliant elastomers, Perlast® G75S is thermally stable at higher temperatures, and is ideal for use in applications which require exposure to temperatures up to 310°C (590°F) making it suitable for use in Stage II Sterilization processes.Perlast® G75S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High elongation at break assists installation High tensile strength makes G75S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

The Addisil™ 460 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Lifocolor BLACK 3030SAN is based on various carrier polymers and types of carbon black. Alongside with the UV radiation effect and choice of carrier, the shade, color depth and color strength are the most important characteristics of black masterbatches. The color depth indicates the intensity of the black coloring. Intensity increases with decreased light reflection or increased light absorption.

POLIMAXX®R1760 is a High Density Polyethylene resin for injection molding with high impact strength, excellent surface appearance and good rigidity contain UV stabilizer additive. It is suitable for crates, trays, cases, industrial parts, bins, large housewares, safety helmets packaging of agriculture products pallets, heavy duty articles. It also meets the F.D.A. requirement in the code of federal regulations in 21 CFR 177.1520 for food contact.

Promyde® BF640 L is a new experimental copolyamide with lubricant additive, specially formulated for the production of cast and blown film.

Styron HI™ is High Impact Polystryene HIPS. It is a low-cost plastic material that is easy to machine and fabricate. Stryon HI is often specified for low strength structural applications when impact resistance, machinability, and low cost are required.

Characteristics: Control reologhy Impact block copolymer polypropylene; high impact/stiffness balance; good thermal stability and chemicals resistance. Recommended for: Injection molding of batteries cases, buckets, industrial parts, toys, containers; injection and extrusion molding general purpose applications.

Tefzel™ HT-2183 is a copolymer oftetrafluoroethylene andhexafluoropropylene. This meltprocessible fluoropolymer exhibitsexcellent resistance to heat, wearand chemicals.

SIMONA® PE 100 black 10024801 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

MoldWiz® AB-25FG - A concentrated, water-dispersible, surface active process aid additive that imparts anti blocking properties. May be used as a surface treatment or added to water bath in thermoplastic extrusion processes.

The Addisil™ IND 1080 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Smiths Metal Centers Polypropylene PP-30GF is a high-quality general purpose engineering plastic material. Polypropylene PP-30GF is polypropylene homopolymer with 30% glass fiber.