Products in Chemical & Industrial Manufacturing: Good Mechanical Pro...

XECARB® HM 12-C30-HT is a 30% carbon fiber reinforced PPA

ECP 270 Colourable Magnetically Detectable ABS Compound for injection molding and extrusion. ECP 270 is a colourable magnetic compound based on special blends of magnetic additive compounded into ABS in such a way as to optimize physical and magnetic properties during processing. Used in the food processing industry where detection of foreign body plastic products is required.

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

USI Chemical Silane USi-402, as a co-monomer in polymers, can improve wet scrub resistance and abrasion resistance thanks to crosslinking and better adhesion to the substrate.

DAI-EL G-962 provides sheets with steam resistance, chemical resistance, and good mechanical properties. With a white color, it finds applications in O rings and turbocharger hoses within the automotive and transportation markets. The sheets, available in powder form, are soluble in lower ketones and esters.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

DAI-EL G-9503 showcases sheets with attributes like steam resistance and good mechanical properties. Colored white, it serves applications like O rings and turbocharger hoses in the automotive and transportation markets. The product, in powder and solid forms, is soluble in lower ketones and esters.

XECARB® HM 20-C30 is a 30% carbon fiber reinforced PA11

USI Chemical Silane USi-1302 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. Silane USi-1302 also greatly increases water (vapor) and corrosion resistance.

DAI-EL G-901, available in sheet form, stands out with steam resistance, chemical resistance, good mechanical properties, and an odorless nature. Tailored for automotive and industrial applications, it excels in cooling and climate components. Utilizing chemical cure and compression molding, this white-colored product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Synthetic styrene-butadiene rubber Styrene-butadiene synthetic rubber SSBR-4040 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

BRUGGOLEN® P22 is a highly efficient nucleating agent for polyamides. The addition of Bruggolen® P22 to the polymer melt leads to fine particles which induce a very fine and homogeneous crystalline structure.FeaturesIncreases crystallinityReduces cycle time during injection moldingImproves dimensional stability - significant reduction of warping in GF-reinforced compoundsImproves mechanical properties (tensile strength, stiffness, flexural modulus, etc.)Increases heat distortion temperatureNon-volatile; non-extractable

DAI-EL G-902, in sheet form, distinguishes itself with chemical resistance, good mechanical properties, an odorless nature, acid resistance, and steam resistance. Suited for automotive and industrial applications, it excels in cooling and climate components. Employing chemical cure and extrusion, injection molding, and transfer molding, this white-colored product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

DAI-EL LT-252 is a material known for its acid resistance, good mechanical properties, low-temperature flexibility, odorless nature, and solvent resistance. Suited for automotive and industrial applications, it excels in powertrains and equipment parts. Employing chemical cure and compression molding and transfer molding, this product ensures reliable performance in components like fuel entrance cover seals, fuel hoses, and O rings.

AL151 is a clear, colorless, strongly alkaline liquid with smell and being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. AL151 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or as a moisture crosslinker of silicone polymers. The application as “coupling agent” leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

XECARB® HM 21-C30 is a 30% carbon fiber reinforced PA12

RT629 is a paper phenolic tube intended primarily for mechanical applications, but is suitable for electrical applications as well. The electrical properties are not quite as good as those of RT630. RT629 also complies with MIL-I-24768/11, Type PBG and ASTM D709 Type I Grade XX and IEC 612112-3-1-PFCP.

Adell Plastics, Inc. Adell™ Polyamide BR-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-13: Flame Rated.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion. Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. CoreLite PET can handle processing temperatures up to 150 °C (302 °F) . During high temperature processing it is thermally stable and no outgassing or expansion after postcure occurs. In the event of fire, no toxic gasses are generated.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

PolyBarb Filament PEEK is a series of high quality and easy to print PolyEther Ether Ketone filaments with printed mechanical properties surpassing chopped carbon fiber filled PEEK, allowing for significantly stronger parts.

Adell Plastics, Inc. Adell™ Polyamide BL-38 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America.Typical application of Adell Polyamide BL-38: Automotive

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

USI Chemical Silane USi-2301 improves both adhesion to the substrate and mechanical properties such as flexural strength, tensile strength and modulus of elasticity.

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.