Products in Chemical & Industrial Manufacturing: Good Mechanical Pro...

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

GrapheneBlack™ 0X is NanoXplore's slightly smaller pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

USI Chemical Silane USi-412 acts as an adhesion promoter for various mineral-filled polymers improving their mechanical and electrical properties, especially after exposure to moisture.

DAI-EL LT-304, presented in sheet form, shares similar features with LT-303L, offering solvent resistance, good mechanical properties, low-temperature flexibility, and an odorless profile. With its white color, this product caters to applications such as O rings, fuel hoses, and fuel entrance cover seals in the automotive and industrial sectors. It aligns with chemical cure methods, supporting processing methods like compression molding, injection molding, and transfer molding. Its solubility in lower ketones and esters adds to its versatility.

Adell Plastics, Inc. Adell™ Polyamide BR-34 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-34: Flame Rated.

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Styrene-butadiene synthetic rubber SSBR-2560 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabllized with staining antioxidant. The polymer contains по nitrosamines and substances that may become а source of nitrosamines.

Neoflon PCTFE M-300PL, in pellet form, showcases outstanding transparency and gas barrier properties. With a structure replacing all hydrogen atoms in polyvinyl chloride with fluorine atoms, it achieves remarkable clarity, making it suitable for various applications in the electrical, electronics, and industrial sectors. While it exhibits commendable mechanical attributes and stress crack resistance, it marginally trails behind PFA and FEP in heat and chemical resistance. This high-molecular-weight product excels in both compression and extrusion molding processes, finding its place in semiconductor manufacturing, wire and cable insulation, and equipment components like gaskets and tubes.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Polyflon PTFE M-18, available in powder or solid form, is a white resin known for its good mechanical properties and high melt viscosity. Processed through compression molding, it targets markets in automotive and transportation, electrical and electronics, industrial, and printing and packaging. Applications include bellows, housings, and industrial tanks.

DAI-EL G-964 offers sheets with steam resistance, chemical resistance, and good mechanical properties. Colored white, it caters to end uses like O rings and turbocharger hoses in the automotive and transportation markets. The product is available in both compression molding and transfer molding methods, presenting a characteristic appearance of white powder and solubility in lower ketones and esters.

MD Graphene Neo ABS Pellets are made up of Graphene Nanofiber reinforced Acrylonitrile-Butadiene-Styrene which creates a nanostructure or skeleton that increases the density of the material. It is the best and first choice material suitable for medical devices and medical components that require high quality. The graphene nanofiber allows the processability to produce elements of the highest quality and complex structural geometries.

XECARB® 37-C30 is a 30% carbon fiber reinforced PA46

XECARB® 17-C30-P10-P3 is a 30% carbon fiber reinforced PEBA

PolyBarb Filament PEI85 is a series of high quality and easy to print PolyEther Imide filaments with printed mechanical properties surpassing to chopped carbon fiber filled PEI, allowing for significantly stronger parts.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

Grade RT310 is a tube made from a medium weight canvas fabric combined with a phenolic resin that has good physical properties and machining characteristics. Typical applications include textile bobbins, lap spools and structural parts that require good impact strength. RT310 also complies with MIL-I-24768/16, Type FBM, ASTM D709 Type II Grade C and IEC-61212-3-1 PF CC 22.

DAI-EL G-801, in sheet form, features good mechanical properties, odorless characteristics, acid resistance, and steam resistance. Tailored for automotive and industrial applications, it excels in cooling and climate components. With chemical cure and compression molding as its preferred methods, this product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

XECARB® 17-C30-P6 is a 30% carbon fiber reinforced PEBA

DAI-EL LT-303L is a versatile product available in sheet form, designed with features such as solvent resistance, good mechanical properties, low-temperature flexibility, and being odorless. Its white color makes it suitable for various applications in the automotive and industrial sectors, including O rings, fuel hoses, and fuel entrance cover seals. Targeting markets like automotive powertrains and industrial manufacturing equipment, this product adheres to chemical cure methods and is soluble in lower ketones and esters.

DAI-EL G-952, available in sheet form, distinguishes itself with steam resistance, chemical resistance, good mechanical properties, low-temperature flexibility, an odorless nature, and acid resistance. Suited for automotive and industrial applications, it excels in cooling and climate components. Employing chemical cure and compression molding and transfer molding, this white-colored product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

DAI-EL G-8002, available in sheet form, offers good mechanical properties, odorless features, acid resistance, and steam resistance. Suited for automotive and industrial applications, it excels in cooling and climate components. Utilizing chemical cure and extrusion, this product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

Butadiene-styrene synthetic statistical rubber SSBR-2560 TDAE HV is a polymerization product of 1,3-butdiene with styrene in hydrocarbon solvent in the pres-ence of anionic initiating agent. Polymer is TDAE oil extended and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

XECARB® HM 1-C30 is a 30% carbon fiber reinforced PA66

Adell Plastics, Inc. Adell™ Polyamide BR-14 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-14: Flame Rated.

XECARB® 17-C30-P2 is a 30% carbon fiber reinforced PEBA

XECARB® HM 17-C30-P3 is a 30% carbon fiber reinforced PEBA

The RT500F has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500F is made with a fine weave woven glass fabric, for better machining and a smoother surface finish. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10. Certification to IEC standard is pending.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

USI Chemical Silane USi-1301 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties - such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. USi-1301 also greatly increases water (vapor) and corrosion resistance.

Boron Nitride NanoBarb™ BNNB-P-90A1 uses a proprietary, catalyst-free process, to manufacture an enhanced boron nitride nanotube called the Boron Nitride NanoBarbTM, with properties enhanced beyond typical nanotubes further making the NanoBarbTM a strategic component for improving advanced materials.