Products in Chemical & Industrial Manufacturing: Light Weight

Telene® 1660 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.

JN Technologies Pte. Nylon Rod commonly known as polyamide rod or PA rod (PA), are a semi-crystalline polymers with very good mechanical properties, extreme toughness and excellent sliding and wear properties. The properties vary from hard, tough PA66 to soft, flexible PA12. Depending on the type, polyamides absorb different amounts of moisture, so influencing the mechanical properties and dimensional accuracy.

E-LT 2900 is a E-Glass fiber type.

BPI FormiFor Insulation is an exceptionally high quality product, meeting very specific packaging demands of the insulation, glasswool and stonewool products markets. Its lightweight structure uses up to 50% less material in comparison with other traditional packaging films, ensuring manufacturers benefit from an increased packing yield, and lower warehousing and transport costs per product.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process. Plastazote® 5SLD15BK-0522 is a low density polyethylene foam.

Nylacast Polypropylene is a light weight copolymer material with high impact ,stress cracking and chemical resistance. Not only does this material offer these characteristics but also exhibits great flexibility and toughness at low temperatures with low moisture intake.

Textile Products Carbon 3K Fabric Style #4163 Endless application capabilities for woven materials, Used in Aircraft, Medical, Fiberglass, Marine, Industrial, Recreational, Life Protection.

Avanstatic 747 as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

BigRep HI-TEMP CF is a filament compound combining the world of sustainable bioplastics with the performance of high-tech carbon fiber technology. It is lightweight, resistant to high temperatures and can be used to create superior stiff and stable parts, including UV resistance. It is highly suited for applications in motorsports, aerospace, sporting goods and medical. As well as applications in molding and forming technology.

Nycast® XHA — Blue is operating at 200°F (93°C) will approximately have the same physical properties as a standard material at 185°F (85°C). This material has delivered successful performance throughout the years. The main advantages of NYCAST XHA blue are: Also available in natural, black and forest green.

LINCORE® FF UD 250 is a 100% flax fabric made of untwisted rovings.The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay upThese fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.

TYCOR® G4.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

Telene® 1650 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process. Plastazote® 5SMP15FRPGY-0532 is a flame-retarted metallocene low density polyethylene foam.

E-2LTI 7200 is a E-Glass fiber type.

Telene® 1750 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.

CIP Composites CIP131 is a very cost effective material commonly used for wear ring, stable in hydraulic fluids, and nonabrasive to mating surfaces.

AQuariA® pure cast acrylics, stands out for its extreme purity and transparency, brightness, lightness and aging resistance, as well as for the standard production of large acrylic blocks, with thicknesses up to 750 mm and sizes up to 9980×3050 mm. The great mechanical properties of our AQuariA® methacrylate, in addition with the great ductility of the material, allowed Clax to produce and design aquarium tanks, within the biggest in the world.

TYCOR® G5.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

SWANCOR 2596 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula. It is special-purpose high-rigidity and toughening product, which has better toughening properties than 2556 with light weight, excellent mechanical strength, heat resistance and corrosion resistance, etc.

Telene® 1810 A/B technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.This system has been designed to produce machine cast parts.

CELLAMP® PELLETS 5100 is for producing foaming boards with damping properties, which yield the best efficiency between -10°C and room temperature.

MCA® PPM Triazine 770 is a “Ready-to-Use”synergistic blend of ammonium polyphosphate with the proprietary1) polymeric, halogen-free nitrogen synergist MCA® PPM-Triazine HF and an additional carbon-booster for fire retardation by intumescence; derived from phosphorus nitrogen synergism. In the event of fire the plastic material containing such a fire retardant system foams, cross-links and forms a solid char at the surface acting as a fire shield. The protective layer also imparts a heat-insulation effect, reduces oxygen permeability and prevents dripping of molten polymer, if and wherever it can occur. Such systems are also characterized by low smoke density, and low toxic fumes. MCA® AP-PPMT 770, containing inert large molecular weight MCA® PPM-Triazine HF, is particularly recommended where state-of-the-art commercial blends of ammonium polyphosphate with small molecular weight nitrogen synergists fail either in processing or in performance such as due to sublimation, liberation of toxic ammonia by self-condensation, mold deposits, and plate-out from or interaction with the polymer itself.

EPIKOTE™ Resin MGS LR285 is a resin of a very good quality used for the aeronautics and for the production of models. The resin together with a hardener makes a very viscose blend which is why the fibers are quickly and very well saturated. Due to this, the product has lower weight and higher use value.

Trelleborg Industries UK Nylon which are nylons are a family of synthetic polymers known as polyamides. They can be used to make mechanical parts such as gears and screws, and can also be extruded. Nylons are lightweight and resistant to corrosion and abrasion. FDA and USP Class VI grades are available. Medical tubing applications include suction, drainage, feeding tubes, dialysis, peristaltic pumps and other surgical procedures.

C-LT 0900 is a carbon fiber type.

GreenTEC Pro Carbon carbon is a biopolymer made from renewable resources with10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance. In addition, the raw material is approved according to the REACH- and RoHS-Standards.

Avannatur Evastat (S) as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

Avannatur Evastat 850 as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

VITROFLEX TRANSPARENT MCM506NN is the acrylic pouring plate with transparent colors that allow vision through.

CSM 450 is used in composite materials production as reinforcing filler with unsaturated polyester resins applied.

ArmaPET™ Struct GR150 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.Plastazote® 5SLD33PGY-0091 is a low density polyethylene foam.