Products in Chemical & Industrial Manufacturing: Oil Resistant

NBR 2645 NT is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

Millathane® 5004M (Premilled) is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Apcoflex® NVC155E* is a blend of Apcoflex NBR, PVC and Plasticiser in the ratio of 50:50:10. It contains non-staining stabilizer and comes in Sheet form.

Sylvin Technologies Sylvin™ 8036-70 Black is a vinyl compound formulated for molding applications that require increased oil resistance. This compound meets the requirements of fmvss 302 flammability specification.

American Rubber Products® NEO-50 is noted for its versatility for general-purpose applications. It can display very good resistance to ozone, oxygen, sunlight, alkalis and acids.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

MM-PVC E 1585 is PVC plasticized compound by Extrusion Processing

American Rubber Products® NBR-60 is suitable for general purpose applications requiring oil resistance. It has outstanding resistance to oil, gasoline, petroleum-based hydraulic fluids and hydrocarbon solvents.

Paracril C is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Viton® /FKM/FFKM is the most specified fluoroelastomer, wel known for its excellent (400°F/200°C) heat resistance. Viton@ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration. Viton® is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings and other molded components. We mold Viton@ O-rings for a variety of applications in the aerospace and industrial markets. Viton® O-rings are ideal in oil field applications where Viton® can resist aggressive properties of natural gas and oils.

Nancar® NBR 1042 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It has high Mooney viscosity and provides compounds with higher strength and modulus..

SERIES 60 AND 2103 ETHERProducts based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.

American Rubber Products® NBR-70 is suitable for general purpose applications requiring oil resistance. It has outstanding resistance to oil, gasoline, petroleum-based hydraulic fluids and hydrocarbon solvents.

Thermoseal C-4201 is a general application gasket material that offers excellent resistance to oils and solvents and is an excellent choice for OEM applications. This compressed fiber gasket material is manufactured with a combination of synthetic fibers reinforced with a nitrile binder.

SERIES 20 STANDARD ESTERProducts based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

VinoPrene 706 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Fabru TPC is a Copolymer of ethylene and other unsaturated monomer.

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

Nitrile 4367-70 nitrile seals are ideal for use in low temperatures and hydraulic fluids. Parco 4367-70 seals are suitable for applications ranging from -65 to +275°F.

Paracril CJLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

RE-PLAS® 210 plasticisers are saturated polyester resins used in the production of PVC compounds and rubber compounds, providing resistance to volatility, resistance to chemical extraction and migration. These polymeric plasticisers are long chain polyesters with high molecular weight which results in a stable, durable and long lasting plastic or rubber product.

Texalan® 370A product has excellent abrasion resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Chemically bonds with polyethylene and polypropylene for overmold applications

Shandong Xuye New Materials 140B is easy processing, oil resistance and inflaming retarding.

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Coruba Neoprene Rubber Gaskets With enhanced resistance to petroleum, acids, oil, ozone and weathering, our premium grade neoprene gaskets comply with British Standard 2752 and have good anti-abrasion properties.

Essentium’s TPU 74D is the highest durometer filament in our broad flexible portfolio. It is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

Thermoseal C-4408 is a universal high-pressure gasket material for industrial applications. This material has a low carbon steel woven mesh insert that improves stress relaxation and makes this material suitable for fluctuating temperatures and pressures. C-4408 has good resistance to oils, fuels and hydrocarbons. This material is manufactured with aramid fiber reinforced with a nitrile binder.

Vinoplast 550 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Essentium TPU 80A-Z is the lowest durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Currently, Essentium TPU 80A-Z is the softest 3D printing material that can be printed on any open-source printer. It has excellent elongation at break and impact strength and has a low friction surface that allows for easier feeding while printing.

MM-PVC I 1583 is PVC plasticized compound by Injection Processing

Dynacast Industrial Products Chloroprene Rubber-CR has several types of polychloroprene. Chloroprene rubber mechanical properties are generally inferior to natural rubber but with superior chemical properties. Over time crystallization results in hardening at temperatures about -10 degree C. CR has very good resistance to ozone. It also has good flame retardance and good tackiness.

Paraclean 28L80 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.