Products in Chemical & Industrial Manufacturing: Corrosion Resistant

HIDROL-ED 22 is a high performance multipurpose mineral hydraulic oil which is produced from high quality mineral base oils and several kinds of special additives.

BioGrease PPG BG2500 is specifically designed for plunger packing lubrication of triplex and quintuplex pumps. BioGrease PPG BG2500 is made from a high quality natural ester base oil, with a special blend of polymers to provide low temperature pumpability, excellent adhesion to the plunger, and minimize friction while providing an excellent seal in the system. Pumpability is critical in these pumps and BioGrease PPG BG2500 offers excellent performance at a very wide range of temperatures. In addition, this ultra-low toxicity grease is made from bio-based, sustainable base stocks, and is readily biodegradable if released in the environment. BioGrease PPG BG2500 is formulated featuring our proprietary eSyn™ technology.

SERVICE PRO® PREMIUM AW HYDRAULIC OIL 100 are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all major manufacturers and users of hydraulic equipment. These oils are characterized by outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti-foam properties. They also contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps. AW Hydraulic Oils are made from top quality base stocks and contain all the necessary additives.

Opticool™ 972(E) (EMEA Only) is a high performance, low maintenance synthetic fluid. OPTICOOL 972(E) is DEA and Boron free and offers superior lubricity, corrosion inhibition, extreme pressure resistance, rancidity control and hard water stability. OPTICOOL 972(E) is usable in a broad range of machining operations from low to high speed and recommended for alloy steels, cast irons and exotic metals. The heat dissipating properties reduce heat and chip formation, provide rapid cooling of the tool and the workpiece, extending tool life when compared to conventional soluble oils and semi-synthetics.

Berucoat AF 438 is a friction reducing and extreme pressure anti-friction coatings with excellent corrosion protection and is the preferred choice for metallic surfaces. Berucoat AF 438 has a transfer layer structure, excellent temperature resistance, high load bearing capacity with low friction values.

Cadlube Gear Oils ISO 15 are formulated with a premium quality extreme pressure additive that is suitable for high loads and protects against wear. They are formulated with anti-foam, anti-rust and anti-wearing properties, they are each designed to ensure excellent performance under heavy and stressful loads and a wide variation of temperatures.

Eoncoat Corrosion Protection is a Two component, inorganic, coating. Forms a continuous coat of ceramic coating that provides excellent anti-corrosion properties for carbon steel.

IADA GIL is a lubricating grease for universal use, made from special lithium-based thickeners, highly refined oils and additives, which give it high quality. It is a special lithium grease for bushings and bearings.

CMC Klebetechnik CMC 10718 is a double-sided polyester adhesive tape that is coated on both sides with a two-sided shecr resistant and sticky acrylate adhesive.

Primrose Oil 513M Armor Plate with Moly-D is a multi-grade gear oil that provides excellent lubrication for both the axle and transmission in summer and winter has long been desired by equipment manufacturers. The great success and public acceptance of multi-grade motor oils has emphasized the need for similar viscosity features in gear oils. The viscosity improvers that work so well in motor oils would shear out under the extreme pressures encountered in gears, resulting in severe viscosity loss.

Liquid-O-Ring® 159N00 offers rust and corrosion additives as well as oxidation inhibitors enhancing the performance of this multi-purpose lithium grease. 159 Machinery Grease resists mechanical shear and is water and washout resistant. 159 Machinery Grease is manufactured with extreme pressure additives for increased load carrying capabilities and anti-wear properties for effective performance under constant high load conditions. It is a great general automotive, industrial, and machinery grease. 159 Machinery Grease is highly recommended as a bearing lubricant.

Hodejka® ZR 00 is a dispersion of inorganic pigments, fillers and zinc phosphate in a solution of alkyd resin with the addition of driers, additives and organic solvents. It is produced in 2 modifications. Primer intended for application on steel and cast iron surfaces or surfaces provided with the original coating system. Thanks to the content of anti-corrosion inhibitors based on zinc phosphate, it actively suppresses the formation or course of corrosion. The color is combined with the top colors (emails). The coating system as a whole is designed for common outdoor environments or for indoor applications.

Cor-Ban® D-5010NS is a powerful penetrating oil and corrosion inhibitor used for small parts.

MDS Lubricant Suppliers 2 x Bulldog BDX & Kennel incorporates a finely tuned blend of the latest anti-friction/anti-wear technology incorporating ceramic reinforced PTFE and the latest additives to deliver outstanding performance values offering exceptionally low coefficient of friction and exceptional levels of wear protection in a wide operating temperature range (-40 to +280°C). BDX is non-toxic and odor free. This unique combination of high performance & multi-functionality allows BDX to be the go to product that should be seen as a first option solution for most applications. Rarely do we see a genuine combination of innovation, technology and effectiveness enter the lubricants market in such a dynamic way that it is “a game changer”. BDX is one of those rare products that should really be called a tool as opposed to a lubricant.

Integrated Protective Coatings System 3 Black is a FEP-based Teflon thin film coating that is designed to provide excellent chemical and corrosion resistance in a single coat application.

Berucoat AF 291 is a friction reducing and extreme pressure anti-friction coatings with excellent corrosion protection and is the preferred choice for metallic surfaces. Berucoat AF 130 has an outstanding media resistance, especially in combination with motor oils.

Specialty Silicone Products SSP-1208-WA is a lubricating grease designed for a wide range of applications where contacting surfaces are under medium to light loads, and where wide temperature ranges are expected. SSP-1208WA is useful as corrosion inhibitor, plastics gear lubricant, and mold release. It is best suited for conditions where extreme water resistance are desired. SSP-1208WA features minimal separation at temperatures up to 500°F, low volatility, and is non corrosive to plastics.

Clearco Products Silicone Grease NLGI#1 O‐Ring & Valve Lubricant is an NLGI #1(lowest stiffness) Silicone Grease, formulated with Polydimethylsiloxane and inert silica filler. It is used in a variety of applications that require: wide range of thermal stability, high dielectric strength, electrical insulation, inertness to rubber and plastic surfaces, and insulation against corrosion and moisture.

E17™ is an aluminum titanium nitride based proprietary coating.

CIMSTAR® 585 metalworking fluid is a high-performance semi-synthetic metalworking fluid designed for moderate to heavy-duty machining of ferrous and nonferrous materials.

Biobased™ Marine Grease NLGI #2 is a premium quality biodegradable, water resistant, Biotech based™ grease formulated with OptiBase™ Oils, lithium complex based thickener and extreme pressure additives for maximum performance. It meets NLGI’s GC-LB specifications for fretting wear protection, oxidation & thermal stability, resistance for wear, rust & corrosion and compatibility with commonly used elastomers.

FlexSafe™ ISO 15 are designed for a wide variety of applications:  hydraulics, compressors, vacuum pumps, blowers, turbines, light duty gear boxes, slideways, cables, conveyors, chains, air tools, and other applications in food and industrial plants.

Verila® Lithium EP 2 MG is lubricating grease based on lithium 12-hydroxystearate soap and high-quality mineral base oil of ISO VG150 viscosity grade. The grease contains antioxidants, rust and corrosion inhibitors and extreme pressure [EP] and anti-wear [AW] additives. The addition of dry lubricants, synergistic blend of Moly and Graphite is providing extra protection against wear in slow moving, sliding, oscillating and shock load conditions.

CMC Klebetechnik CMC 12010 is a double-sided tape with an acrylic dispersion adhesive and a tissue carrier.

Apexior® Number 1C is a VOC compliant, single component, easy to apply air dry coating specifically formulated for the hot water-side corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1C is resistant to continuous immersion in boiling water and steam from 200°F to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1C prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1C will also see an increase in heat transfer efficiency. Apexior Number 1C performs ideally with water treatment in steam generating equipment.

METALIZE® WELDABLE PRIMER 2-HTP-1757 is a heavy duty, rust preventative primer designed for structural steel which will be subjected to severe or extended exposure. High purity zinc oxide pigments promote maximum corrosion resistance while allowing the primer to be welded through with no adverse effect on the integrity of the weld point. It is used as airless or conventional spray.

Prolong® EP-2 Grease w/AFMT provides high load carrying ability, and delivers outstanding performance in a wide range of high to low-temperature applications with excellent resistance to water wash-out and oxidation. This next-generation grease is characterized by superior mechanical stability coupled with extremely high load-carrying ability.

TURBEX 100 is a high performance multipurpose mineral turbine oil which is produced from high quality mineral base oils and several kinds of special additives.

DeoxIT® Shield S100L is a metal surface lubricant and protector. Deterrent to oxidation and corrosion. Improves conductivity and keeps signal quality at its peak. DeoxIT® Shield also reduces wear and abrasion, arcing, RFI, and intermittent connections, as well as improving connector performance and reliability. Ideal for harsh conditions. Pre-treat oxidized surfaces with DeoxIT® D-Series contact cleaner. The temperature range is -34°C to +210°C.

Xp³® 71-4111 is synthetic high performance high temperature grease.

RECOFREEZE AL® 50/50 is a premixed, ready to use, pH neutral heat transfer fluid specifically designed for use in aluminum boiler and heat exchanger systems. It is especially suited to combat acidic corrosion of aluminum and other system metals utilizing a proprietary combination of corrosion inhibitors in a blend of virgin propylene glycol and high quality de-ionized water. The additive system used is free of amine, borate, nitrate, nitrite, phosphate or silicate and formulated to provide corrosion protection to copper, solder, brass, steel, cast iron and aluminum components.

Moist-Out MO-10™ is a light spray lubricant, demoisturant and penetrant formulated into one superior product. It has excellent penetrating abilities that drive out moisture for quick, thorough moisture displacement, provides longlasting lubrication, and protects from rust and corrosion.

CIMPERIAL® 1311 is a heavy-duty, soluble metalworking fluid that combines the dependability of traditional soluble fluids with industry-leading technology to deliver market-leading performance. CIMPERIAL®1311 is designed for all machining, sawing, and grinding operations on ferrous and most non-ferrous metals, including Cast/Ductile Iron.

Everlube® 9502 is a PTFE/MoS2 based solid film lubricant with an epoxy binder system. Everlube® 9502 is used for Fastener applications.

Accor® ACCOGRAISSE EP2 is a High quality lithium grease, for multiple uses, insoluble in water developed for equipment working under high temperature and heavy loads. It is suitable for the lubrication of loaded bearings, ball bearings, gears, articulations, coupling, sliding channels, universal joints, water pumps, civil engineering equipment.

IonoVit S is a high-performance dielectric designed for economic and fast working from an electrode diameter of 0,5 mm. It is also suitable for the processing of aluminum. Work pieces made of ferrous metals are temporarily protected from corrosion. IonoVit S is a ready-to-use product. The concentration is regulated using a hand refractometer. It is used for fast start hole drilling.