Products in Other Industrial Applications: Polyamides

Stanyl® TE200F6-FC is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.

Adell Plastics, Inc. Adell™ Polyamide BR-34 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-34: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BR-14 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-14: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BR-37 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-37: Flame Rated.Typical application of Adell Polyamide BR-37: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-13: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BL-38 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America.Typical application of Adell Polyamide BL-38: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.

Thermec™ N 4340R35H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

Domamid® L 66Y10 is polyamide 66, improved triboligial properties, with MoS2, is used for injection molding.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Polifil® NYLON 6 provides superior strength and rigidity with electrical resistance and surface lubricity. These properties have been proven to work in the following applications: automotive, housings, bearings as well as appliances. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Nilit NILAMID® A3 J10 GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, impact modified.This compound is intended for injection molding.NILAMID® A3 J10 GF30 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nylon 6 A1030GFL45 is a glass fiber-reinforced grade with medium viscosity. It is used for injection molding applications.

Econamid® FL 66 500 is polyamide 66, with improved impact modification, is used for injection molding.

ProPolymers PAA 4000 is a 40% reinforced aromatic nylon copolymer. It has very high stiffness and strength similar to PPA. It can be processed in water heated tools and provides excellent surface finish. It is commonly used in metal and die cast replacement applications.

NYLOY® MC-0020N has high strength with low density.

THETAMID R B GF30 BK1000 is an PA6 30% gf black and recycled polyamide (PA) compound obtained from post-industrial waste (PIR) in the minimum quantity of 30%, named THETAMID R.

Polimersan Plastics Polipa (PA 6) is one of the most preferred Polymer due to resistance to bending and wearing, perfect performance balance and low cost.

ZISAMIDE® HP2201 is the latest development from high performance Nylon, is produced by the EMS GROUP’s INVENTA-FISCHER. In order to assure the quality and stability, we keep the entire process in consecution.

Domamid® 66B30FC is polyamide 66, has 30% glass beads, is used for food contact compliant and for injection molding.

Polimersan Plastics Polikes (PA 6 G) is tough and high mechanical strength and produced by casting.

CENTROMID 12 LE / PA 12 LE soft-plastics are often used as flexible hoses for screw and spiral conveyors in the food industry. During the modification with PA 12 LE soft, a special “food compliant” softener is added to the basic polyamide 12 polymer. The modification is also food safe. The resistance of the binding substance is reduced, the application temperature decreases to 130 °C. The tensile strength is reduced to 350 MPa.

RESIMID B2800 G1 is Polyamide 6 with10% glass fiber.

Domamid® 6B30FC is polyamide 6, has 30% glass beads, is used for food contact compliant and for injection molding.

This material combines the excellent properties of the Murylon® range with additional high tensile and burst strength, increased wear resistance, and a lower level of moisture absorption than Murylon® B. Production based on PA66.

Kolon Industries Kopa® KN111 is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Typical application includes Automotive. Characteristics includes flame rated, RoHS compliant and medium viscosity.

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength Free of silicones, it possesses very low wear properties

Badamid® B70 SM-Z2 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

Sebamide 6 S3C-0 is a unamplified Polyamide 6.

VAC-PAK® HS 8171 6/66 is a light blue-green, PA co-polymer film which remains pliable after extended cure cycles. Ideal for advanced composite fabrication and other high temperature/pressure cures up to 400°F (204°C).

Domamid® 66UV1 500 is a polyamide 66, with improved impact modification, UV1 stabilized, is used for injection molding.

InnoMid® PA6.7 M0105000000239 is a Polyamide 66 that has been heat stabilized and comes in a Natural tint.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

PAR Group Nylon 6 Extruded Sheet is a popular engineering plastic that offers high strength, stiffness and hardness enabling it to be easily machined and precision engineered. It also has good wear and creep resistance making it suitable for a wide range of applications. Nylon 6 sheet - extruded also has good heat aging properties, is electrically insulating and is resistant to the majority of oils, chemicals, fuels and cleaning fluids. Nylon 6 sheet - extruded is available to buy online at PAR Direct by clicking the link above.

Agiplast Agimid® 541 N70 (Natural) is PA 10.10 PHLY. Agimid bio-based Polyamide 10.10 which is a link between our long chain polymers products (PA11 and PA12) and our shorter chain polymers (PA 6.12, PA 6.10, PA 6.6, PA 6).

Nilit NILAMID® A2 HH M25 is a low viscosity Polyamide 66 (Nylon 66) compound, 25% mineral filled and high heat stabilized.This compound is intended for injection molding.NILAMID® A2 HH M25 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.