Products in Other Industrial Applications: Resins, Binders & Matrix ...

Resin-SA Pty Ltd RES IS006- UTA is a isopthalic resin which is used for spray up /hand laminating.

KPR 6100 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6100 is used in laminations.

SWANCOR 2559 is a high Tg hot-melt epoxy resin. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

KPR 6300C by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300C is used in buttons.

Resin-SA Pty Ltd RES CR002-U-N-A appears clear and it is fast curing casting resin.

Resin-SA Pty Ltd SHCP 3155 appears clear, low viscosity, highly pottable and fast cure.

Fiberglass (A/Asia) Sales Pty 268 BQTN Laminating Resin is a thixatropic, quick-curing unsaturated polyester resin of orthophthalic grade for general laminating purposes. It is pre-accelerated, and suitable for both hand lay-up and gun spray-up. It is available in Australia either as 268 BQTN LSE waxed, or 268BQTN unwaxed. This resin is used for making a variety of glass fiber reinforced plastic products such as boats and canoes, bus shelters, telephone booths, stadium seating, bath tubs, water and storage tanks, cooling towers, plant and flowers pots, bath units, models, containers, dust bins, safety helmets, water and oil pipes, ash trays, septic tanks, car body parts, sporting equipment, concrete framings, chairs and tables, and other household as well as industrial articles. Glass reinforced laminates made with this resin possess excellent mechanical strength along with good rigidity and outstanding durability. The SHCP 268BQT resin and its variants are approved by Lloyd’s Register of Shipping for boat construction.

SWANCOR 2551 is a hot-melt epoxy resin that can be cured at low temperature. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

Hybtonite® Mix 50/50, CNT modified epoxy resin. It is a low viscosity, solvent free 100 % reactive resin. The system will give increased impact resistance, elongation to break and fatigue compared to any traditional epoxies. It also attaches functional chemical groups covalently to the CNTs. When epoxy resin is cured, these functional groups take part in the polymerization process creating a strong hybrid structure between matrix and CNTs. Due to that nanocarbonepoxy resins possess revolutionary properties compared to the standard epoxy resins. Providing the outstanding performance in numerous composite as well as non-composite bonding applications, nanocarbonepoxy Hybtonite offers ease of use, durability and a consistently high quality. Can be used in marine, automotive industry and in many other industrial applications.

KPR 6600 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6600 is used in laminations and marine applications. Approved by Lloyd’s Register of Shipping.

CHS-EPOXY 590 Is BPF type.

Resin-SA Pty Ltd SHCP 268 BQTN-WS-FL is a general purpose ortho resin for which is used for spray up/ hand laminating.

CHS-EPOXY 455 is a Solvent–free epoxy system with high chemical resistance. Solvent–free epoxy system, accelerated, excellent mechanical properties. Special solvent–free epoxy system, low temperature, wet condition, very fast hardening. Epoxy resin modified with a non-phthalate, non-reactive plasticizer.

HOZOLE is a high-performance duroplastic resin system.

Hybtonite® CA40, CNT modified epoxy resin. It is a low viscosity, solvent free 100 % reactive resin. The system will give increased impact resistance, elongation to break and fatigue compared to any traditional epoxies. It also attaches functional chemical groups covalently to the CNTs. When epoxy resin is cured, these functional groups take part in the polymerization process creating a strong hybrid structure between matrix and CNTs. Due to that nanocarbonepoxy resins possess revolutionary properties compared to the standard epoxy resins. Providing the outstanding performance in numerous composite as well as non-composite bonding applications, nanocarbonepoxy Hybtonite offers ease of use, durability and a consistently high quality. Can be used in marine, automotive industry and in many other industrial applications.

SWANCOR 2554-K is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula with high transparency, no risk of whitening or white spots. It contains well-controlled resin fluidity, which can reduce the lack of glue on the surface when cured. Also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

Resin-SA Pty Ltd SHCP 3254 BQTN-WS is a isopthalic resin which is used for spray up /hand laminating.

KPR 6115 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6115 is used in gel coats.

SWANCOR 2596 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula. It is special-purpose high-rigidity and toughening product, which has better toughening properties than 2556 with light weight, excellent mechanical strength, heat resistance and corrosion resistance, etc.

CHS-EPOXY 525 is a BPA type.

SWANCOR 2594 is a hot-melt epoxy resin and does not contain Diuron and volatile ingredients in the formula. Suitable for the rolling process, has good surface adhesion and spreadability, and is suitable for prepregs with low weight and low resin content.

Resin-SA Pty Ltd RES GP 005 WTA Black is a general purpose ortho resin black pigmented hand laminating.

CHS-EPOXY 200 M 75 is a Solution of low molecular weight epoxy resin in methylethylketone.

Maverick Corporation MVK-7000 is a vinyl phenolic resin developed for use in bearing liner applications. With a lower cost than Maverick’s polyimide products, MVK-7000 provides an economical alternative for bearing applications with lower service temperature requirements. MVK-7000 is available as a solution from Maverick Corporation.

SWANCOR 2558 is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula. It is halogen-free flame retardant products, passed UL94V0 and ROHS2.0, also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

CHS-EPOXY 517 is a Solvent-free system with high chemical resistance. Solvent-free system, low temperature, wet conditions, very fast hardening. Epoxy resin modified with reactive diluent, flexibilized.

CHS-EPOXY 411 is a Semisolid epoxy resin based on Bis A

SWANCOR 2554-N is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula. It is halogen-free flame retardant products, passed EN45545-2 HL2 flame retardant test, also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

SWANCOR 2554 is a hot-melt epoxy resin and does not contain Diuron and volatile ingredients in the formula. Suitable for the rolling process, with good surface adhesion and covering properties.

BRE PW05 TP is used for Fitting resin.

Resin-SA Pty Ltd RES SR006 - PET is a PET resin which is rigid and medium reactive resin.

SWANCOR 2556 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula, a general toughened product. It cotains light weight, excellent mechanical strength, heat resistance and corrosion resistance and other characteristics

ORTHOPHTHALATES OP1012 is a Resin Transfer Molding.

CHS-EPOXY 520 is a BPA type.

Hybtonite® CA35, CNT modified epoxy resin. It is a low viscosity, solvent free 100 % reactive resin. The system will give increased impact resistance, elongation to break and fatigue compared to any traditional epoxies. It also attaches functional chemical groups covalently to the CNTs. When epoxy resin is cured, these functional groups take part in the polymerization process creating a strong hybrid structure between matrix and CNTs. Due to that nanocarbonepoxy resins possess revolutionary properties compared to the standard epoxy resins. Providing the outstanding performance in numerous composite as well as non-composite bonding applications, nanocarbonepoxy Hybtonite offers ease of use, durability and a consistently high quality. Can be used in marine, automotive industry and in many other industrial applications.

ORTHOPHTHALATES OP1O27 is a Filament Winding.