Products in Other Industrial Applications: Gears

Pentamid AHT GV30 H MOS non-colored is a normal viscosity, heat stabilized polyamide 4.6,easy flow, 30% glass fiber reinforced, modified with mos2.

Outline: CZ-1130 is a 30% PAN based carbon fiber reinforced PPS compound that has excellent mechanical properties and self lubrication. Color: Black

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

Compared to LiNNOTAM indicates LiNNOTAMDRiVE 600 Fe higher impact and shock resistance, higher elasticity and less tendency to absorb moisture. In addition, the material is characterized by a improved creep behavior.

Engineering Grade Nylon Resin (PA66)

GEHR PBT® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

POM copolymer unreinforced, medium viscosity, antistatic

Outline: CZ-1030 is a pitch based carbon fiber reinforced PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black

Nylacast Oilon was a break through of the first magnitude in the world of cast nylons, developed in the early 70s by Nylacast and introduced to the market in 1974. Oilon was the very first authentic lubricated Nylon, havinga blended liquid lubricant system built in during the processstages, which obviously resulted in a substantial increase inbearing life, 5 times that of Natural cast nylon and 25 timesthat of phosphor bronze! The lubricant contained within thematerial will not drain, machine, spin, leech or dry out andnever needs replenishment.

Titacon® TX940 is a HIGH IMPACT, TOUGHNESS, HIGH ELASTOMER FILLED.

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

PAR Group Nylon 6 Cast Black Sheet is a popular engineering plastic due to its ease of machinability, high strength, stiffness and hardness. It has good wear resistance and is resistant to the majority of chemicals, fuels and oils. Nylon 6 Sheet - Cast Black also has good heat aging properties and is electrically insulating. The table below shows our standard sheet availability, which are manufactured in-house utilizing our own Nylon Casting facilities. Many of these sizes are available to buy online by clicking the link above. We can also manufacture rods, tubes or bespoke shapes upon request. Nylon 6 sheet - cast black is available to buy online at PAR Direct by clicking the link above.

Ziamid® B is already used in the automotive, E&E, construction and consumer goods industry, the recyclates / ZIA compounds from MKV offer a real alternative to virgin material.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

Titacon® TX920 is a LOW TEMPERATURE IMPACT, TOUGHNESS.

Self-lubricating product based on Polyoximethylene (POM). PTFE.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

PAR Group Nylon 6 Extruded Sheet is a popular engineering plastic that offers high strength, stiffness and hardness enabling it to be easily machined and precision engineered. It also has good wear and creep resistance making it suitable for a wide range of applications. Nylon 6 sheet - extruded also has good heat aging properties, is electrically insulating and is resistant to the majority of oils, chemicals, fuels and cleaning fluids. Nylon 6 sheet - extruded is available to buy online at PAR Direct by clicking the link above.

Titacon® GF925TF10 is a 25％GLASS FIBER REINFORCED, 10％PTFE FILLED, HIGH STRENGTH/STIFFNESS, DIMENSIONAL ACCURACY, WEAR RESISTANCE.

Sebamide 6 S3C-0 is a unamplified Polyamide 6.

Partly crystalline thermoplastic material with high toughness and chemical resistance, but lower compared to other plastics mechanical strength. Because of its high molar mass of approx. 4,500,000 g / mol is very good Wear resistance and vibration damping.

JN Technologies Pte. Nylon Rod commonly known as polyamide rod or PA rod (PA), are a semi-crystalline polymers with very good mechanical properties, extreme toughness and excellent sliding and wear properties. The properties vary from hard, tough PA66 to soft, flexible PA12. Depending on the type, polyamides absorb different amounts of moisture, so influencing the mechanical properties and dimensional accuracy.

RGP is a Nylon 66 Unfilled General Purpose

POM copolymer unreinforced, very low viscosity

Nycast® 6 MPB (Blue) formulations provide performance advantages in applications that require improved impact properties over standard grades. NYCAST 6MP cushion pads protect the hammer from metal-to-metal damage in pile drivers and provide many performance advantages in certain gear, die block, valve seat and other applications. This formulation also provides superior performance in extreme cold temperature applications, where standard grades are prone to impact failure.

Latilub™ 66-20T G/40 is a self-lubricating product based on Polyamide 66 (PA66) reinforced with glass fibers.

ISO TECH Kunststoff GmbH ISO-MID PA 12 is a thermoplastic, partially crystalline plastic, which is characterized by its low water absorption and high toughness. It also has good chemical resistance. Due to its dimensional stability, ISO-MID PA 12 is used for parts with particularly tight tolerances, such as sealing rings, support rings or even gear wheels.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Nycast® 6 MPY (yellow) formulations provide performance advantages in applications that require improved impact properties over standard grades. NYCAST 6MP cushion pads protect the hammer from metal-to-metal damage in pile drivers and provide many performance advantages in certain gear, die block, valve seat and other applications. This formulation also provides superior performance in extreme cold temperature applications, where standard grades are prone to impact failure.

The SOLLAMID A 2700 FV 30 MB 20 family features the PA 66 composite reinforced with Fiberglass and Modified with Molybdenum Disulfide.

POM-C(Delrin)® is a semi crystalline thermoplastic with high mechanical strength and rigidity. The good dimensional stability and particularly good fatigue strength, as well as excellent machining ability, makes POM polymer a highly versatile engineering material, even for complex components.