Products in Other Industrial Applications: Good Abrasion Resistance

ULTRASIL® 7000 is a mechanically compacted granulate that results in less dust development during mixing thanks to the granulation process. ULTRASIL® 7000 GR, on the other hand, is an easily dispersible and highly reinforcing silica that was specifically developed for low-rolling-resistance passenger car tire tread compounds. It imparts high abrasion resistance to tread compounds, along with excellent rolling resistance and wet traction. To achieve these properties, it is necessary to use ULTRASIL® 7000 in combination with a bifunctional organosilane, such as Si 69®, Si 75®, Si 266®, or Si 363.

ULTRASIL® 7000 GR is a highly reinforcing silica that has been specifically developed for use in low-rolling-resistance passenger car tire tread compounds, commonly referred to as "Green Tires". This silica has a specific BET surface area of approximately 175 m²/g, and it exhibits excellent incorporation and dispersion behavior. When used in tire tread compounds, it imparts high abrasion resistance, excellent rolling resistance, and improved wet traction.

InnoMid® PA6.10 M0105001000079 is a Polyamide 66 that has flame retardant with V0 regulations Halogen. It is heat Stabilized which is available in natural color.

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Unirubber Gray EPDM Recycled Granules is a scrap based on EPDM rubber.

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

TEXALAN® 298A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

Smiths Metal Centers Acrylic PMMA is an amorphous thermoplastic which is optically transparent, unaffected by moisture, and offers a high strength-to weight ratio. Common trade names for this material include Plexiglas®, Acrylite® and Lucite®. Acrylics are not recommended for use with chlorinated or aromatic hydrocarbons, esters or ketones. However, the material is unaffected by aqueous solutions of most detergents, acids, alkali’s and laboratory chemicals. It is both a thermoplastics and transparent plastic and is often used as an alternative to glass, but should not be used in structural applications due to poor impact resistance.

Tefzel™ HT-2181 is a copolymer oftetrafluoroethylene andhexafluoropropylene. This meltprocessible fluoropolymer exhibitsexcellent resistance to heat, wearand chemicals.

ISO-LEN® 1000 also known as PE-UHMW or Polyethylene 1000, has proven itself for many years in various fields of application. Due to the wide range of properties, products made from this all-round material are used in all areas of technology in which particularly high demands are made on the materials used. By adding additives, we can also supply you with finished parts made of PE-UHMW in an antistatic version ( ISO-LEN® 1000 AST ) or electrically conductive form ( ISO-LEN® 1000 EL ).

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good scratch and abrasion resistance is required.

Petroz™ 390 durometer FFKM with unsurpassed compression set properties while maintaining excellent chemical resistance.

IIR Isobutylene Isoprene Rubber, Butyl, Bromobutyl, Chlorobutyl Rubber is to develop rubber solutions that will optimize your components performance in your applications.

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

GRP Ultra High & High Tensile Reclaim GRP NRF60 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

PBY Plastics PB71000C is a compression molded virgin Ultra High Molecular Weight PolyEthylene (UHMWPE).

Silane coupling agent Crosile-69(Si69) is bifunctional, sulfur-containing organosilane for rubber applications in combination with white fillers containing silanol groups

A hard, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Twaron® short-cut fiber can raise the performance of a wide range of products, including rubber compounds and engineered plastics.

Eraspray ESP880 is a two component, spray-in-place, solvent free, and 100% solids polyurethane elastomer system and contains a fire-retardant.

ISO TECH Kunststoff GmbH ISO-MOL is a self-lubricating material based on PE-UHMW with significantly improved sliding friction and abrasion resistance. As a further development of our material ISO-LEN® 1000, the addition of additives achieves excellent wear behavior and an excellent coefficient of sliding friction. ISO-MOL® is mainly used in systems in which downtimes are very costly. In particular, slide rails and chain guide profiles as well as linings in the bulk goods sector are often manufactured on the basis of ISO-MOL® .

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Tefzel™ 280 is a copolymer oftetrafluoroethylene andhexafluoropropylene. This meltprocessible fluoropolymer exhibitsexcellent resistance to heat, wearand chemicals.

R75 is a commercial grade red sbr sheet, plate or fabric finish with good physical properties.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Grunstoff Kunststoff-Recycling POM (Polyoxymethylen) is a typical technical Thermoplastic with good mechanical properties and high dimensional stability as well as outstanding gliding and abrasion behavior. As a result, it is a preferred construction material, e.g., for precision parts in precision engineering; in particular there are many applications in the field of snap fasteners. POM Thermoplastics also possess a good resistance to many chemicals.

InnoMid® PA6.7 M0105000000239 is a Polyamide 66 that has been heat stabilized and comes in a Natural tint.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Tefzel™ HT-2183 is a copolymer oftetrafluoroethylene andhexafluoropropylene. This meltprocessible fluoropolymer exhibitsexcellent resistance to heat, wearand chemicals.

Dynacast Industrial Products Butadiene Rubber-BR has low hysteresis, good temperature flexibility and high abrasion resistance under severe weather conditions. It is used in blends with SBR and natural rubber. Butadiene rubber has poor processing properties and poor tear properties.

Crosile®75 (Bis(3-triethoxysilylpropyl)disulfide) TESPD is a bifunction polysulfidic organosilane and has been widely in the rubber industry. Crosile®75 TESPD is used to improve the reinforcing capability of fillers with silanol group on the their surface,and also as an integral part of curing systems to improve cross-linking network properties. Compared to the Crosile®69 (Bis(3-triethoxysilylpropyl)tetrasulfide), Crosile®75 has a higher temperature stability and therefore allows higher mixing temperatures. Crosile®75 imparts greater tensile strength, higher module, reduced compression set, increased abrasion. resistance and optimized dynamic properties.

Texalan® 390A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

Dynacast Industrial Products Ethylene-Propylene Diene Monomer - EPDM is excellent for water and steam applications. EPDM is similar to Styrene Butadiene Rubber (SBR) but has improved resistance to atmospheric aging, heat oxidization and ozone up to about 150C. Ethylene Propylene Diene Monomer has excellent electrical properties and good chemical resistance.

Smiths Metal Centers Nylon 6G, Natural or Black is a high-quality general-purpose wear resistant engineering plastic material. Its chemical name is polyamide. It is available in a range of grades and forms to suit many applications. The casting process allows the production of larger material sections virtually free from residual stress. It may also be cast into customer shapes that reduce material waste and machining time.