Products in Other Industrial Applications: High Strength

Adell Plastics, Inc. Adell™ Polyamide BR-37 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-37: Flame Rated.Typical application of Adell Polyamide BR-37: Automotive

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, low viscosity, laser-inscribable

Korrels B.V. PA, unfilled is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

GEHR POM® 10 PE (GLIDE) are used for tribological applications in which increased sliding wear is to be expected, POM-10PE is frequently used, whose sliding properties have been significantly enhanced. This type of POM-C with modified sliding properties also has a raw material food contact approval.

Dynacast Industrial Products Isoprene Rubber - IR has very similar properties to natural rubber as Isoprene rubber is a synthetic natural rubber. This is the same polymer as natural rubber - but made synthetically. Isoprene rubber is essentially similar in properties to natural rubber but it may be somewhat weaker.

Sylramic™ SiC Fiber, Woven can be readily incorporated into a variety of weaves, woven tapes, braids, etc. A network of U.S. contractors exists to respond to your exact needs. Contact COI Ceramics to discuss specifics and receive further information.

SIROPOL 992 FR resin is a medium viscosity, unprompted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FR resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating with 3% antimony trioxide and Flame retardancy ASTM E-84 Class I rating with 3 % antimony trioxide.

Techno Compound PBT4 Natural (9999) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

Elastocon® CLR65 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, high strength properties and a tactile surface finish. Elastocon® CLR65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR65 can be overmolded onto polypropylene.Elastocon® CLR65 is supplied as ready to use pellets in 1000 lb. quantities.

Kiamid 6 S2C-13 NT is a unamplified Polyamide 6.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

HOZOLE is a high-performance duroplastic resin system.

Toray Toyolac® 100G-30Toyolac® 100G-30 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.Toyolac® 100G-30Toyolac® 100G-30 is an Acrylonitrile Butadiene Styrene (ABS) material filled with 30% glass fiber. It is available in Asia Pacific or Europe.Important attributes of Toyolac® 100G-30 are flame rated RoHS Compliant.

CIP Composites CIP333A has dimensional stability in high temperatures (up to 400° F) and offers excellent chemical resistance. Manufactured with meta-aramid textile and a high temperature vinyl ester resin with the solid lubricant PTFE evenly dispersed throughout the resin system.

Nancar® NBR 1042 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It has high Mooney viscosity and provides compounds with higher strength and modulus..

CIP Composites CIP151A is one of our most commonly used materials due to its ability to provide excellent performance in a wide range of applications and environments. 100% polyester material (textile and resin) with the solid lubrication additives PTFE and molybdenum disulfide (MoS2) evenly dispersed throughout the resin. Enhancement A is added, increasing the overall strength and reduce friction and wear.

PBY Plastics PB71000C is a compression molded virgin Ultra High Molecular Weight PolyEthylene (UHMWPE).

Technora® Short-Cut Fiber can be converted into short-cut fibers or dipped chopped fibers with a range of lengths, typically between 1 mm and 30 mm, for use in, for instance, resin, cement and rubber reinforcement.

PAR Group Nylon 6 MoS2 Extruded Sheet offers increased load bearing and wear resistance, whilst maintaining the impact and fatigue resistance of standard nylon grades. It is self-lubricating, electrically insulating and has a high fatigue resistance. We also manufacture our own brand of Corromide® CMF (Nylon 6 Sheet - MoS2 Filled Cast) in sheets, rods and tubes. Our MoS2 Filled Cast Nylon 6 is available in greater sheet thicknesses and offers a higher temperature rating compared to MoS2 Filled Extruded Nylon 6. Nylon 6 Sheet - MoS2 Filled Extruded is available to buy online at PAR Direct by clicking the link above.

Nemcon™ E PK DP104 is a carbon fiber-reinforced polyetheretherketone, characterized by very high strength, stiffness, consistent moldability, and exceptional thermal resistance.

Chengdu Letian Plastics LTP ZW-3100 has high strength and low density and is broadly applied as wear resisting parts under elevated temperature and humidity work conditions for aerospace, automotive, machine, household appliances, petroleum and chemical industry, such as bearing, axile bush, gear wheel, impeller blade, belt roller, brake block and so on.

Korrels B.V. PA, unfilled, flame retardant, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Glass filled PEKTRON PEEK 1030 has increased strength, good creep resistance, and is not conductive.

SIMONA® PE 100 black 10024799 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

Nylene Low wear 30% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced - Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

Techno Compound PBT4 GF 30 Natural (9987) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Antero™ 800NA is a PEKK-based FDM® thermoplastic. It combines FDM’s design freedom and ease of use with the excellent strength, toughness and wear-resistant properties of PEKK material. Antero 800NA exhibits high heat resistance, chemical resistance, low outgassing and dimensional stability, particularly in large parts. Appropriate applications include aircraft components exposed to jet fuel, oil and hydraulic fluid, spacecraft parts that demand low outgassing and chemical-resistant industrial parts. Using Antero 800NA with FDM technology avoids the waste associated with subtractive manufacturing of high-cost bulk PEKK material. Antero 800NA is available on Fortus 450mc™ and F900™ 3D Printers and is compatible with breakaway support material SUP8000B™.

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

V95X is a high performance general purpose copolymer fluoroelastomer (FKM). This material provides excellent compression set performance and good chemical resistance to phosphate ester, acids, aliphatic and aromatic hydrocarbons, brines, solvents and petroleum fluids.V95X offers superior high temperature capability over HNBR elastomers and provides outstanding O-ring sealing force retention over most other oil-heat resistant elastomers with the exception of FFKM perfluoroelastomers.Key Attributes Good resistance to Explosive Decompression Wide chemical resistance Excellent properties in high pressure applications High strength and extrusion resistant Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, special profile and custom-made seals

PAR Group Nylon 6 Extruded Sheet is a popular engineering plastic that offers high strength, stiffness and hardness enabling it to be easily machined and precision engineered. It also has good wear and creep resistance making it suitable for a wide range of applications. Nylon 6 sheet - extruded also has good heat aging properties, is electrically insulating and is resistant to the majority of oils, chemicals, fuels and cleaning fluids. Nylon 6 sheet - extruded is available to buy online at PAR Direct by clicking the link above.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

RGP is a Nylon 66 Unfilled General Purpose