Products in Other Industrial Applications: Impact Resistance

Adell Plastics, Inc. Adell™ Polyamide BR-34 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-34: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BR-14 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-14: Flame Rated.

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

Adell Plastics, Inc. Adell™ Polyamide BR-37 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-37: Flame Rated.Typical application of Adell Polyamide BR-37: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-13: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BL-38 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America.Typical application of Adell Polyamide BL-38: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.

Reinforced with 15% of glass fiber and modified polyamide 6, with improved impact resistance, heat stabilized for injection molding.

WR® 300 is a carbon-fiber reinforced compression molded PEEK™ often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in clean. lubricated and/or moist environments.WR 300 allows the pump user to increase pump effiency by running tighter wear ring clearances while decreasing potential pump damage when pumps are cavitated or experience radial bearing failures.

Korrels B.V. PA, unfilled is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Loyblend TA-1000 is a general purpose PCIABS polymer alloy. This grade offers high impact resistance, high rigidity and high heat resistance.

INNOPOL® CS 2-7120 is a 20% talc-filled polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Polimersan Plastics Politef ( P.T.F.E. ) is highly resistant to chemical liquids and solvents.

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Elastocon® 9050B is a black thermoplastic elastomer formulated for applications that require high impact resistance and a good surface finish. Elastocon® 9050B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 9050B can be overmolded to polypropylene.Elastocon® 9050B is supplied as ready to use pellets in 1000 lb. quantities.

DynaStar™ 77360-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

35 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4130H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Its high melt flow allows for quick filling of molds.The 4130H product provides: Ulta high impact and melt flow Superior balance of stiffness and impact strength Excellent color and processing stability Fast cycle-time It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.Pinnacle's 4130H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

Korrels B.V. PA, unfilled, flame retardant, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

PA66 Long glass fiber 40% reinforced

Unreinforced and modified polyamide 66 improved with good-impact resistance, heat stabilized and lubricated for injection molding.

Nipoflex® 630 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 630 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

Unreinforced and modified polyamide 6 improved with good-impact resistance, heat stabilized and lubricated for injection molding.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

Nipoflex® 710 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for blown film, foam processing, injection molding, or sheet extrusion.Important attributes of Nipoflex® 710 are: Clarity Copolymer Good Flexibility High ESCR (Stress Crack Resistant) High Gloss Typical applications include: Caps/Lids/Closures Consumer Goods Film Labels

PPS-SG401R87 PPS is a 40% advanced glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance

PPS-SG401R63 PPS is a 40% glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

SAPHIR® AS, is an antistatic coated polycarbonate sheet with a unique protection against electrostatic charging.

DN Plastics DN-Flex 5010N is used in cup holders, tray liners, gaskets and seals, bellows, air bag covers, etc.

Ulpolen® 1000 (PE1000) is a type of polyethylene with average molecular weight over 5 million. ULPOLEN1000®’s resistance to impact and wear is much higher than that of other plastics in a wide temperature interval.

Nycast® CP 6/12 has proven itself in many applications that require an extra degree of toughness. A copolymer of Caprolactam and Laurinlactam, NYCAST CP was specifically developed for use in ball valve seats in the oil and gas industry. This durable material provides an economical, high-performance bridge between NYCAST 6 and NYCAST 12 formulations. NYCAST CP has a higher elongation, superior dimensional stability and a safety yellow color. Because of this, it has found itself a superior choice for wobbler box inserts and coupling boxes in the cold rolling steel industry as well as mandrel covers used in paper tube manufacturing plants.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.