Products in Other Industrial Applications: Oil Resistant

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

NITRIFLEX® NBR/PVC PDC-7421 by Valex Group is commonly used as Polymer Compounding for a variety of applications.

Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Apcoflex® NVC155E* is a blend of Apcoflex NBR, PVC and Plasticiser in the ratio of 50:50:10. It contains non-staining stabilizer and comes in Sheet form.

Sylvin Technologies Sylvin™ 8036-70 Black is a vinyl compound formulated for molding applications that require increased oil resistance. This compound meets the requirements of fmvss 302 flammability specification.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Viton® /FKM/FFKM is the most specified fluoroelastomer, wel known for its excellent (400°F/200°C) heat resistance. Viton@ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration. Viton® is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings and other molded components. We mold Viton@ O-rings for a variety of applications in the aerospace and industrial markets. Viton® O-rings are ideal in oil field applications where Viton® can resist aggressive properties of natural gas and oils.

Nancar® NBR 1042 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It has high Mooney viscosity and provides compounds with higher strength and modulus..

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

VinoPrene 706 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

Texalan® 370A product has excellent abrasion resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Chemically bonds with polyethylene and polypropylene for overmold applications

Shandong Xuye New Materials 140B is easy processing, oil resistance and inflaming retarding.

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

SERIES 25 SPECIAL ESTERProducts based on special grade saturated polyester. The features are similar to those of Series 20 but are characterized by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.

Vinoplast 550 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Dynacast Industrial Products Chloroprene Rubber-CR has several types of polychloroprene. Chloroprene rubber mechanical properties are generally inferior to natural rubber but with superior chemical properties. Over time crystallization results in hardening at temperatures about -10 degree C. CR has very good resistance to ozone. It also has good flame retardance and good tackiness.

Paraclean 28L80 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Nancar® NBR 1041 is a copolymer of butadiene and acrylonitrile with excellent oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It cures faster and provides higher modulus and tensile strength..

Petroz™ 375 durometer general purpose FFKM with exceptional compression set properties and excellent chemical resistance.

CSM 40 rubber is a kind of white material which turns to light yellow or brown, tasteless evenly rubber-shape, and it has the mutual character with rubber which also has its own property. 2. It is non-toxic, non-explosive, open flame burning, auto-extinction after remove. 3. It has excellent ozone resistance, resistance to atmospheric aging, chemical resistance, better physical mechanical, thermal aging resistance and low temperature resistance (-20℃-12℃), oil resistance, flame resistance, abrasion resistance and electrical insulation etc.

Product Information: BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Processing Method: Injection Molding and Some Extrusion Applications Chemically bonds with polyethylene and polypropylene for overmold applications

Cooper Standard ISG A-ZU 65-84 is a black color chloroprene sheeting. According to DIN EN 61111, VDE-certificate for class 0; 3; 4 (depends on thickness).

Petroz™ 390 durometer FFKM with unsurpassed compression set properties while maintaining excellent chemical resistance.

TPE Solutions TPV 155A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

KRAIBURG CPE is a chlorinated polyethylene used in applications such as the manufacture of flame-resistant and oil-resistant cable sheathings, also for hoses.

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

Sylvin™ 8036-75 Clear is a vinyl compound formulated for Clear extrusion applications where durability against detergents and oils are needed.

TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

VinoPrene 701 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Shandong Xuye New Materials CM335 has the advantages like: good mechanical property and easy processing, It can total and part replaces CR, CSM, NBR and other rubbers, which is widely used in rubber and other areas.