Products in Other Industrial Applications: Release Agent

Libnol G-151 is a Oleochemical Derivative. Improves flow in hard to reach mold area. Supplements rheological inherent in molding powder.

MoldWiz® WB-2700 - A liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

MoldWiz® EM-606SFL - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

TR Industries TR-226 Polymer Concrete Release is a solvent based liquid polymer external mold release. It is ready to use on a wide variety of substrates (metal, aluminum, composite, urethane, etc.) when molding/casting highly filled polyester resins for the production of polymer concrete parts.

TR Industries TR-216 Hi-temp Liquid Wax Release is a high temperature liquid mold release wax formulated for increased production efficiency on well conditioned FRP tooling and other hard surface molds.

MUENCH CHEMIE Release Agent MK-67/11-H-N is all purpose, semi-permanent silicone-free water-based mold release agent for the rubber processing industry.

CEVO®-mold I-6611 is a special wax blend based on natural and semisynthetic ester waxes. CEVO®-mold I-6611 has good release effect on phenolic resins and high melting. It is used in textile bonded felts.

MUENCH CHEMIE Hose and profile release agent series MK-15504 is specially developed for the production of flexible hoses and profiles, as well as color filled hoses. Mold release agents and lubricants are especially suited for the production of all flexible hoses. These innovative products are free of water and solvent and absolutely silicone free and suitable for cold and hot forms/mandrels.

ZINC STEARATE VG (USP Grade) - Manufactured from a high quality vegetable fatty acid with a low iodine value in a tightly controlled production operation that guarantees product uniformity.

STRUKTOL® WS 280 Organosilicone providing maximum heat stability in FKM and FVMQ compounds

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

MoldWiz® WB-GR50 - A water based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part. Will not interfere with any secondary operations such as decorating, bonding, or painting

OMNIWAX® #1624 Urethane Release Agent is a stable formulation requiring no agitation. OMNIWAX® #1624 has lower wax content than OMNIWAX® #1622 and therefore is especially well suited for non-pourous chrome surface molds.

OMNIWAX® #1628 Urethane Release Agent is specifically designed for cold molding of urethane parts and a release for in-mold coatings. OMNIWAX® #1628 has lower silicone content than OMNIWAX® #1628-A and therefore is especially well suited for non-pourous chrome surface molds.

Slide Products EconoMIST Mold Release Spray (No. 41612N) is NSF registered formulation safe for food applications. Non-paintable.

MoldWiz® INT-1854 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

MR 187 - A silicone free anti-tack agent (liquid, water soluble, mandrel release) and external lubricant for rubber processing. It has been especially designed for EPDM hoses, both peroxide and sulfur cross-linked, but can also be used successfully as a lubricantfor cured rubber articles. It is biodegradable.

MoldWiz® WB-B25 is 100% water-based. Highly economical. 20% active – dilute with water up to 30:1.Brake pads and clutch plates used on all types of metal molds for compression molding abrasive mixes with, epoxy; phenolic; MMA; polyester; or rubber binders.

OMNIWAX® #1628-A Urethane Release Agent has a slightly higher percentage of release than OMNIWAX® #1628 and is specifically formulated for cold molding of urethane parts.

TR Industries TR-210 Self Striping Liquid Mold Release is a liquid wax release based on our carnauba base paste wax and blend of active cleaning solvents to reduce and minimize styrene and wax release build-up or accumulation.

XTEND® 818+ is good for high production parts with gel coat.It is used or polyester or vinyl ester Good gloss and no pre-release

XTEND® 858 - An air-drying external mold release. It cures to a semipermanent coating, which provides multiple releases without transfer.

TR Industries TR-102 Regular Mold Release is a high production paste wax mold release with excellent breakdown characteristics for fast, even coverage. A firm carnauba based mold release paste wax blended with other synthetic waxes for use in various thermo-set composite molding applications.

MUENCH CHEMIE Release Agent MP-151 is a release agent, whose formulation is exclusively based on raw materials that are listed by the FDA.

MoldWiz® INT-1846N2 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating

MoldWiz® INT-1888LE - A process aid additive and mold release which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. Mix well before use.

Libnol G-7281 is a Complex Ester and a Release Agent.

MoldWiz® INT-326PWD - A process aid additive and mold release with anti-static properties, which is incorporated directly into the resin eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating.

XTEND® W-102 - A 100% water-based is used to wipe on and polish off at ambient temperature in FRP mold release. XTEND® W-102 yields high gloss when applied over XTR sealer.

MoldWiz® WB-4606 - A water-based external release agent that adheres to the mold walls and has no affinity for the resin. Multiple releases for each application can be achieved.

Slide Products Universal Mold Release Agent (No. 42612H) is a broad universal release that can be used on all thermoplastics, even more sensitive plastics. It uses a non-silicone and paintable release oil. Approved as a direct food additive, Universal also meets certain requirements for molding medical products - contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

Slide Products Knock Out Mold Release Agent (No. 46612N) is the mold release that works where others have failed. It gets "sticky parts" cleanly out of the mold and is approved for indirect food contact.knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application. Paintable formulation.