Products in Other Industrial Applications: Corrosion Resistant

HeBoCoat® EL-W 300 is a highly-concentrated, water-based, boron nitride suspension which was developed especially as an additive for galvanic baths. The extremely fine boron nitride particles ensure good suspension stability and a high storage rate during the electroplating process.

Thermaguard™ CUI 650 is a third generation, pure inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. The coating conforms to the NACE SP0198-2017 classification, inert multi polymeric matrix coatings for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 650 can withstand temperatures from -196 to 650°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 650 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 650 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 260oC, removing the need for plant shut down periods.

FortiPhy℠ PVD Coating is a PVD based chromium Nitride (CrN) tool coating, is a patented Physical Vapor Deposition (PVD) coating technology based upon the principles of plasma acceleration. This process results in higher plasma density and an intense, low energy ion bombardment during coating deposition. Coatings formed by this process exhibit unprecedented toughness and lubricity, as well as outstanding uniformity.

Thermaguard™ TIC 180 is a waterbased, single component, Thermal Insulation Coating (TIC), formulated to provide a seamless weather resistant insulation film which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1. The insulation coating acts as a thermal barrier, protecting interior temperatures against cold, warm & humid weather conditions. Can be easily implemented into an inspection program due to the elimination of external cladding therefore, offering a maintenance friendly insulation coating system.

Liquid-O-Ring® PM600N00 is a heavy-duty, all-purpose lubricant manufactured specifically for bearings and open gears. PM600 is tacky and has very high shock-absorbing abilities with a high melting point of +500°F (260°C). PM600 is a grease manufactured with exceptional adhesive and cohesive properties, allowing longer service intervals. PM600 forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is water-resistant and protects against corrosion as it lubricates.

Thermaguard™ TIC 400 is a new technology waterbased, single component, inorganic polymeric siloxane matrix, Thermal Insulation Coating (TIC). The insulation coating is formulated to provide a seamless, hydrophobic, weather resistant insulation film. The insulation coating is an inorganic & ultra-low VOC coating. Offering hydrophobicity (moisture resistance), operating temperatures from -60 to 400oC range & exceptional weathering resistance. Thermaguard™ TIC 400 acts as a thermal barrier, which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1 (SafeTouch™ properties). Protecting interior temperatures against cold, warm & humid weather conditions. Elimination of external cladding results in a maintenance friendly insulation system for quick inspections. Thermaguard™ TIC 400 has Ultra-High-Build (UHB) capabilities up to 20000 microns DFT in a single multi-pass application. Application at such thicknesses allows use of Thermaguard™ TIC 400 liquid insulation to partly or completely replace use of traditional insulation material systems.

Dicronite® Dry Lubrication is a tungsten disulfide (WS2), solid lubricant coating. This extremely thin film coating provides friction and sliding wear reduction that improves performance in various applications across numerous industries.

RichardsApex NAL-250HM is a medium viscosity high film strength oil. It is composed of extreme pressure additives and formulated with select friction modifiers. It is highly recommended for use as a lubricant on stamping, machining and drawing of both ferrous and nonferrous metals.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

Primrose Oil 216G Food Grade Gear Oil is a custom quality extreme pressure gear oil recommended for food machinery gear applications in the food processing, packaging and transportation industries. 216G may be used where NSF (formerly U.S.D.A.) category H-1 (lubricants with incidental contact with food) is recommended.

CMC Klebetechnik CMC 12064 is a double-sided polyester tape that has a permanent high adhesive strength on both sides.

Liquid-O-Ring® PM800 is a heavy-duty, high temperature, allpurpose lubricant. It is sightly tacky and has a high melting point of +500°F (260°C). PM800 is manufactured with slight adhesive and cohesive properties, allowing longer service intervals. PM800 forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is water resistant and protects against corrosion as it lubricates.

Primrose Oil 512M Armor Plate with Moly-D is a multi-grade gear oil that provides excellent lubrication for both the axle and transmission in summer and winter has long been desired by equipment manufacturers. The great success and public acceptance of multi-grade motor oils has emphasized the need for similar viscosity features in gear oils.

CertiPhy℠ TiAIN Coating is a wear resistance coating made for high-value tooling and the most severe die casting applications. It provides a top-notch graded architecture of nano-laminated layers of titanium and titanium aluminum nitrides (TiAlN), which possess extremely high resistance to heat checking and soldering.

CMC Klebetechnik CMC 70752 is a double-sided adhesive tape that adheres to silicone surfaces and performs well at high temperatures.

Liquid-O-Ring® 3500 Red Gear Oil provides lubrication for bearings and gears, particularly those operating under severe service conditions. 3500 Red Gear Oil, is a 85/140 wt. oil, forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is waterproof, nonfoaming, and resistant to oxidation and corrosion. 3500 Red Gear Oil also reduces wear as much as 60%. It has a drain interval of 4 to 5 times longer than commercial gear oils.

CMC Klebetechnik CMC 10430 is a double-sided tape that is ideal for bonding siliconized surfaces. The aging-resistant polysiloxane adhesive enables self-adhesive silicone profiles and silicone mats. In the film and paper industries, the tape can also be used as splicing tape for siliconized web products.

CMC Klebetechnik CMC 80808 is a smooth double-sided adhesive tape reinforced with non-woven fibers. Very good initial tack, even on slightly rough surfaces, provides good all-around performance.

Liquid-O-Ring® 153M is a multipurpose grease manufactured with molybdenum disulfide. 153M Molygard offers increased protection against mechanical shear. It contains rust and corrosion additives as well as oxidation inhibitors enhancing the performance of this multipurpose grease. 153M Molygard contains extreme pressure additives for increased load carrying capabilities and anti-wear properties for effective performance under high load conditions. With a dropping point of 352°F (177°C), 153M Molygard is recommended for applications requiring stability, and where high-temperature and film forming properties are required.

Primrose Oil B680 Enviro Blend is a complete environmental gear lubricant formulated for biodegradability, non-toxicity, and superior industrial gear lubricant performance.

Primrose Oil 514M Armor Plate with Moly-D is an industrial gear oil developed specifically for the significantly higher temperatures and pressures typical of modern industrial applications. Transmissions systems are designed to convey greater energy through the gear train at increased speeds without a corresponding increase in oil pump size or cooling capacity.

CMC Klebetechnik CMC 10718 is a double-sided polyester adhesive tape that is coated on both sides with a two-sided shecr resistant and sticky acrylate adhesive.

Primrose Oil 513M Armor Plate with Moly-D is a multi-grade gear oil that provides excellent lubrication for both the axle and transmission in summer and winter has long been desired by equipment manufacturers. The great success and public acceptance of multi-grade motor oils has emphasized the need for similar viscosity features in gear oils. The viscosity improvers that work so well in motor oils would shear out under the extreme pressures encountered in gears, resulting in severe viscosity loss.

Liquid-O-Ring® 159N00 offers rust and corrosion additives as well as oxidation inhibitors enhancing the performance of this multi-purpose lithium grease. 159 Machinery Grease resists mechanical shear and is water and washout resistant. 159 Machinery Grease is manufactured with extreme pressure additives for increased load carrying capabilities and anti-wear properties for effective performance under constant high load conditions. It is a great general automotive, industrial, and machinery grease. 159 Machinery Grease is highly recommended as a bearing lubricant.

CMC Klebetechnik CMC 70097 is a temperature-resistant double-sided adhesive tape with a high-adhesion, temperature-resistant pure acrylic adhesive on both sides. These adhesives are distinguished by their aging resistance and chemical resistance.

Syn-Lube™ High Performance Synthetic Grease is an extraordinary, state-of-the art synthetic lubricating grease that’s NSF Listed. Food-and medical-grade, the calcium sulfonate formula does not contain metals, PTFE, or silicone. With antioxidants, extreme pressure additives, and anti-wear additives, SYN-LUBE outlasts and outperforms virtually all other greases on the market. PTFE lubricants and other food-grade greases (calcium-based, clay-based, aluminum complex-based) just can’t match the exceptional friction reduction and wear resistance of SYN-LUBE. Designed for the most severe industrial and food applications, SYN-LUBE is the right choice if you’re looking for a universal grease for all of your needs.

CMC Klebetechnik CMC 12096 is a double-sided adhesive tape with a PET film substrate that is stabilized. The highly snear resistant adhesive performs well in UV exposure, high temperatures, chemical resistance, and humidity. Excellent permanent adhesive strength on a variety of surfaces, including those with low surface energy. A thicker material allows for better adhesion to rough or structured surfaces.

CMC Klebetechnik CMC 12010 is a double-sided tape with an acrylic dispersion adhesive and a tissue carrier.

Thermaguard™ CUI 300 is a unique inorganic single component, ambient curing polysiloxane coating formulated specifically to provide corrosion protection to under insulation environments where wet & dry cycling can occur. Novel technology which offers high solids chemistry, low VOC for demanding environmental regulations and safety aspects during hot application. The coating conforms to the NACE SP0198-2017 classification for Corrosion Under Insulation (CUI) in both cryogenic & elevated temperature applications. Through specific formulation technology Thermaguard™ CUI 300 can withstand temperatures from -196 to 300°C, fully curing at ambient conditions eliminating the need for heat curing prior to service. Thermaguard™ CUI 300 has exceptional resistance to thermal cycling, hot saline water immersion & chemical exposure throughout its operating temperature range. Thermaguard™ CUI 300 can be used in both OEM (shop application) & maintenance work due to having surface tolerance to rusted steels, which have been marginally prepared (St 2/3). Additionally, the product can be applied in service to hot equipment operating up to 300°C, removing the need for plant shut down periods.

Primrose Oil 357 Armor Plate with Moly-D NLGI Grade No. 2 is a rich green moly grease which provides excellent stability and unsurpassed performance under a wide range of temperatures and operating conditions. Armor Plate grease is entirely unique due to the fact that the moly in it is a compound which provides superior performance to other greases containing the black solid form of moly, molybdenum disulfide.

Thermaguard™ SAL 600 is a high temperature resistant siloxane aluminum, single component, ambient curing, coating which is designed to provide corrosion protection throughout a range of temperatures from -196 to 600oC. Formulated coating to provide corrosion protection to steel equipment which is exterior exposed and operating at elevated or cryogenic temperatures. Designed to withstand thermal cycling throughout its operating range while maintaining corrosion protection to steel substrates.

CMC Klebetechnik CMC 10730 is a double-sided tape that is ideal for bonding on siliconized surfaces. The aging-resistant polysiloxane adhesive enables self-adhesive silicone profiles and silicone mats. The tape can also be used in the film and paper industries as a splicing tape for siliconized web products.