Products in Tooling & Moldmaking: Automotive Exterior Parts

BDT LG3701 has an excellent mold flow, mold release, good resistance to the fuel containing alcohols.

ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. By mixing MG 425 with MG 400 the E-modulus can variably between 630 – 1550 MPa. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. Release agent – please see category release agent

MEPLAC ES F17 is a ABS injection molding grade with 17% glass fibers reinforced.

Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A

PETG Carbon Filament is a Polyethylene Terephthalate reinforced with carbon fibers. Due to the carbon fibers compounded in the PETG you can create 3D printed parts with exceptional stiffness, great dimensional stability and excellent suface quality. This filament is highly suitable for printing a wide range of industrial applications like frames, drones, tools, parts for the automotive and more.

Taulman 3D Alloy 910 HDT is a newly released material, developed to incorporate the legendary printing characteristics of Alloy 910 with additional heat deflection and thermal resistance properties. Many of our customers are placing their 3d printed parts close to heat sources and this led to requests for a higher degree of heat and thermal resistance. In turn, we developed Alloy 910 HDT.

Glass Sphere Reinforced Nylon Resin (PA66)

Elogio AM PLA Filament (Polylactic Acid) is a biodegradable plastic coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants.PLA is a polyester that is built from several lactic acid units. It is colorless and transparent. PLA has a density of about 1.25 kg/cm3. Polymers made of lactic acid are flammable.

BDT H3651 has an excellent mold flow, mold release, good resistance to the fuel containing alcohols.

Glass Sphere Reinforced Nylon Resin (PA66)

Taulman 3D Nylon 645 is currently being used by CNC shops around the world to support quick turn prototypes for pre-pilot and pilot runs as well as production runs. As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn need.

ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials. The aramid fibers assuring dimensional stability ,preventing the printed object to warp and even make the printed object lighter than regular ABS.

Ebalta MG 453 GF is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Release agent – please see category release agent

Essentium PET-CF is a 15% carbon fiber reinforced polyester filament made with Luvocom® 3F resin from Lehvoss. Polyethylene terephthalate (PET) is a semicrystalline polyester commonly used in soda bottles and automotive parts when reinforced with a fiber-filler. This material is one of the easiest filaments in our portfolio to print and has an outstanding price-to-performance ratio. PET-CF has a good balance of stiffness and strength, and when annealed it has temperature resistance of over 155˚C, and good chemical resistance for common solvents.

Glass Sphere Reinforced Nylon Resin (PA6)

Taulman 3D TECH-G PETG was developed to not only be high strength, but also have limited elongation. Engineering firms were using PLA and ABS for initial Form and Fit evaluations. In some cases, the strength of these materials allowed some limited functional use. In the case of PLA, it was the brittle nature of medium or larger parts that severely limited functional testing. With ABS, the limit was always Tensile strength. With TECH-G, we believe we have now given the development and design industry an easy to print material with much higher Tensile when 3D Printed and enough elongation so as to be truly useful in functional testing.

Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).

ASA (Acrylonitirle Styrene Acrylate) 3D Printing Filament- 750grams made from premium UV-resistant resin. Printed parts made from this material offer exceptional UV-stability making it a great choice for outdoor applications. ASA also exhibits excellent mechanical and thermal properties. Manufactured in the USA by Push Plastic using premium ASA resin. This material is a great substitute for normal ABS when resistance to outdoor exposure is needed.Manufactured from 100% virgin resin and then spooled onto 750 gram reels, the filament is then vacuum-sealed with desiccant.

ECO MEPLAC IS 110 BK is a ABS injection molding grade. It is suitable for general purpose.

Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is based on PA6 and is easy to print with low warping and improved layer bonding is optimized for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber.

BDHT H3601 has an excellent mold flow, mold release, superior resistance to the fuel containing alcohols.

MEPLAC ES 200 is a ABS injection molding grade. It has high flow, high impact and good gloss.

Glass Sphere Reinforced Nylon Resin (PA66)

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Ebalta AH 150 / IP 25 is a very low-viscosity two-component epoxy resin with high strength and high dimensional stability. Due to its good soaking and wetting properties the resin/hardener mixture is suitable for infusion and laminating of solid parts with glass or carbon fibers. The hardeners IP 25, IP 55 as well as IP 430 can be mixed with each other thus reaching pot life between 10 min. and 430 min. Please ask for our mixing table IP 25/IP 430. ebalta AH 150/IP 25 is suitable for infusions with a flow distance up to approx. 450 mm as well as for laminating thin and largearea laminates up to 3 mm thickness.

Lib Dispersant 1010 is a Copolymer with Oleochemical Derivative.

Elogio AM ABS Filament is a thermoplastic and a copolymer that is used for rigid objects. It consists of 5-30% Butadiene, around 50% Styrene and the rest is Acrylonitrile. ABS is a strong material with high toughness and impact resistance. The maximum operating temperature is between 85 °C and 100 °C, depending on the modifications. The minimum operating temperature is -35 °C. ABS is a flammable polymer to which flame retardant can be added. It is also subject to aging by being exposed to the weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulates the oxidation of Polystyrene. This causes discolouration and the plastic loses its mechanical strength. In order to improve this UV stabilizers can be added.

BDT KR3801 has an excellent mold flow, mold release, good resistance to the fuel containing alcohols.

ebalta AH 150/IP 430 is a very low-viscosity two-component epoxy resin with high strength and high dimensional stability. Due to its good soaking and wetting properties the resin/hardener mixture is suitable for infusion and laminating of solid parts with glass or carbon fibers. The hardeners IP 25, IP 55 as well as IP 430 can be mixed with each other thus reaching pot life between 10 min. and 430 min. Please ask for our mixing table IP 25/IP 430. ebalta AH 150/IP 430 is suitable for infusions with a flow distance of more than over 1000 mm as well as for laminating thin and large-area laminates up to approx. 18 mm thickness.

ebalta MG 453 is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Release agent – please see category release agent

ebalta MG 426 is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryl-lacquer- systems. Release agent – please see category release agent.