Products in Tooling & Moldmaking: Gears

PA 6 reinforced with glass fiber, improved impact strength

PA 66 reinforced with glass fiber

PA 6 reinforced with glass fiber

PA 6 reinforced with glass fiber and glass beads

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

Polyamide 6 general purpose

PA 66 reinforced with mineral filler

Nycast® 6 MPB (Blue) formulations provide performance advantages in applications that require improved impact properties over standard grades. NYCAST 6MP cushion pads protect the hammer from metal-to-metal damage in pile drivers and provide many performance advantages in certain gear, die block, valve seat and other applications. This formulation also provides superior performance in extreme cold temperature applications, where standard grades are prone to impact failure.

Pomalux® Polyoxymethylene (POMC) is a high-performance acetal copolymer used for a wide range of applications. Pomalux® has good chemical and high-temperature resistance. As a semi-crystalline material, Pomalux® has good wear resistance and low frictional characteristics.Pomalux® also has low moisture absorption making Pomalux® a good candidate for a wide range of structural and mechanical components that carry or transmit loads in dry or wet environments .

PA 6 reinforced with glass fiber, flame retarded

PA 6/66 reinforced with glass fiber

PA 6 reinforced with glass fiber

Z-NYLON is a versatile and strong 3D printing filament resistant to high temperatures and various chemicals. It can be post-processed with tools meant for machining metals. Z-NYLON is hard to break and easy to paint as it can be colored with commonly used, acid-based clothing dyes. The filament quickly absorbs moisture and should be stored in a water-proof bag with a moisture absorber. As all nylon-based materials, Z-NYLON has a relatively high shrinkage so it is not advisable to use it for 3D printing large geometric shapes with steep slopes. To reduce the shrinkage, it is recommended to work with HEPA Cover attached on the M Series Plus 3D printers.

Polyamide 6 general purpose

PA 66 reinforced with mineral filler, heat stabilized

Glass Sphere Reinforced Nylon Resin (PA66)

Glass Sphere Reinforced Nylon Resin (PA66)

Nycast® 6 MPY (yellow) formulations provide performance advantages in applications that require improved impact properties over standard grades. NYCAST 6MP cushion pads protect the hammer from metal-to-metal damage in pile drivers and provide many performance advantages in certain gear, die block, valve seat and other applications. This formulation also provides superior performance in extreme cold temperature applications, where standard grades are prone to impact failure.

Polyamide 6 general purpose

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

PA 6 reinforced with glass fiber

PA 6 reinforced with glass fiber, improved impact strength

PA 6 reinforced with glass fiber

PA 6 reinforced with glass fiber

PA 6 reinforced with glass fiber, improved impact strength

Glass Sphere Reinforced Nylon Resin (PA6)

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

PA 6 reinforced with glass fiber and glass beads

PA 6 reinforced with glass fiber, UV stabilized

PA 6 reinforced with glass fiber

PA 6 reinforced with glass fiber, heat stabilized

PA 66 reinforced with mineral filler

PA 66 reinforced with mineral filler, flame retarded

PA 66 reinforced with glass fiber, heat stabilized

PA 6 reinforced with glass fiber