Products in Tooling & Moldmaking: Good Abrasion Resistance

USI Chemical Silane USi-412 acts as an adhesion promoter for various mineral-filled polymers improving their mechanical and electrical properties, especially after exposure to moisture.

Essentium TPU 80A-Z is the lowest durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Currently, Essentium TPU 80A-Z is the softest 3D printing material that can be printed on any open-source printer. It has excellent elongation at break and impact strength and has a low friction surface that allows for easier feeding while printing.

Epoxy BT is a thixotropic pigmented epoxy resin coating.

Essentium’s TPU 74D is the highest durometer filament in our broad flexible portfolio. It is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.

RESOLCOAT 7050 is a Abrasion resistant epoxy gelcoat. which has excellent abrasion resistance and has good fire resistance. This new generation system has a viscosity and a thixotropy suitable for brush application on heated tools

Essentium TPU 95A-Z is a medium durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With nonmarring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Essentium TPU 95A-Z balances high elongation with impressive impact resistance and tensile strength. This filament has a low friction surface that allows for easier feeding while printing.

RESOLCOAT 7060 is an epoxy clear or pigmented Gelcoat. Which has improved UV resistance, room temperature cure & high gloss and choice of slow and fast hardeners. RESOLCOAT 7060 epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing. Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy. In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or colored version for tools or parts production.

Essentium TPU 74D-Z is a high durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. Essentium’s Z line of filaments are the only industrially-proven safe materials for ESD sensitive applications. Essentium TPU 74D-Z is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

RESOLCOAT 7060(S) COULEUR is an tintable epoxy gelcoat (RAL color chart). The RESOLCOAT 7060(S) COLOR / 7064 & 7067 epoxy system is a tinted gelcoat formulated for the production of molds & composite parts. It is available in WHITE & BLACK Nevertheless, a post-cure will make it possible to obtain optimal thermomechanical properties. The 7060S COLOR version is an accelerated version which offers greater responsiveness and reduced working time. Two hardeners are available: a slow (7064) & a fast (7067) depending on the desired reactivity. in standard. It is also possible to choose the desired RAL color by combining 7060 BASE with our PIG RAL xxxx epoxy pigment pastes. The gelcoat hardens at room temperature and can be unmolded without post-curing.

RECKLI Epoxy Compound 61/20 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames and decorative parts. Its color is creamy-white.

Eager Polymers EP7922 White Mold Release Paste Wax is a mold release agent for all the numerous and widespread applications currently used by carnauba wax. In the plastics industry, a film of carnauba wax may be used alone or superimposed by other compounds such as PVA (polyvinyl alcohol) as an excellent releasing agent for most jobs. However, there are different grades and colors of carnauba wax, whereas our white mold release wax EP7922 is pure white. This feature is of great importance to plastics manufactureres who cannot tolerate staining, discoloration or marking off of the cast piece.

GRP Ultra High & High Tensile Reclaim GRP NRF60 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

Moulex® WD8 is external semi permanent water based release agent. It exhibits high gliding effect. It possesses highly abrasive resistant.

RESOLCOAT 7080 CSI is an High abrasion resistance gelcoat. Which has high thermomechanical properties and Room temperature release.

GRP Ultra High & High Tensile Reclaim GRP NRF65 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

Moulex® 100 is free of silicone oil, external semi permanent release agent. Offers high gliding effect. It possesses highly abrasive resistant properties. Ready to be used and allows obtaining a thin release coating without transfer to molded parts. Due to its composition it also reduces mold fouling.

GRP Ultra High & High Tensile Reclaim GRP NRF75 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

Essentium Flame Retardant TPU 90A has been engineered to have the perfect balance of elasticity and toughness. This filament exhibits excellent interlayer adhesion and high strain at break; the base resin is UL94 V0 certified for flame retardancy and printed samples pass FAA FAR 25.853(a) 12 and 60 second vertical flame tests for 1/16” and 1/4” thickness. Our TPU 90A FR filament is perfect for a print that needs inherent flame retardant properties with flexibility, grip, and abrasion resistance. Use this material to make flexible hinges, belts, plugs, gaskets, protective cases, overgrips, wheels, vibration dampeners, energy-absorbing lattices, and so much more.

Epoxy Compound 71/30 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.

Ebalta GH 706/GL is a well castable two-components epoxy resin, which cures at room temperature and can be casted 40 - 50 mm thickness. The resin GH 706 contains very fine hard fillers and with hardener GL it has got a very hard, wear resistant surface with high compression strength and very fine structure. Physical data as per test specimen cured for 8 hrs. at 80°C ebalta GH 706 is the castable version of the very hard gelcoat OH 6-1.

RESOLCOAT 7060(S) CLEAR is a colorless gelcoat formulated for the production of composite parts. It is intended for the production of parts of apparent carbon aspect or other decorative fabrics when the esthetic aspect is research.

GRP Ultra High & High Tensile Reclaim GRP UHT100 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.