Products in Tooling & Moldmaking: Good Weather Stability

POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.

USI Chemical Silane USi-412 acts as an adhesion promoter for various mineral-filled polymers improving their mechanical and electrical properties, especially after exposure to moisture.

Nexa3D 3843-xABS Black is a high performance, high modulus product which boasts excellent flexural and tensile physical properties with a relatively high degree of elongation. Nexa3D 3843-xABS Black displays high green strength and good Heat DeflectionTemperature enabling it to print accurately and function in a wide variety of applications. Nexa3D3843-xABS Black has been tested in QUV exterior weathering conditions (ASTM G-154) for 800 hours with less than a 15% change in Tensile and IZOD Impact properties.

Nexa3D xPP405-Clear is a high elongation and high toughness material with outstanding impact resistance and excellent surface finish. This stiff and durable high performance material is ideal for a wide variety of tools in the production floor, including manufacturing aids and final parts such as housings and consumer goods applications. The unique set of performance attributes makes it comparable to an unfilled thermoplastic like polypropylene. Parts can be printed with various DLP printers and machined, tapped, or polished for final finish.

Nexa3D xPP405-Black is a high elongation and high toughness material with outstanding impact resistance and excellent surface finish.This stiff and durable high performance material is ideal for a wide variety of tools in the production floor, including manufacturing aids and final parts such as housings and consumer goods applications. The unique set of perform anceattributes makes it comparable to an unfilled thermoplastic like polypropylene. Parts can be printed with various DLP printersand machined, tapped, or polished for final finish.

High Density Foam Board. A high-quality, cost-effective closed-cell PVC foam specially formulated to provide high physical properties. Engineered to be easy to work with, be weatherproof and deliver good insulation properties, Additionally, it has superior fire behavior.

CORAFOAM® U 150 F is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

fluteck™ E200 FEP is a thermoplastic fluoropolymer based on fluorinated ethylene propylene (FEP).

Polynt Group 22, 22-01 - superior waterimpact resistance and weathering properties; resistance to staining, chalking, crazing and cracking; high gloss retention; easy sprayability. It is generally used in composites applicatons.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

Zortrax Z-ASA Pro is a thermoplastic which is durable and exhibits superior resistance to external factors, including UV radiation and extreme weather conditions. Using Z-ASA Pro, you can 3D print models and prototypes which will withstand changing temperature, humidity or sunlight, and keep their initial shape and excellent esthetics. Z-ASA Pro is a way to go for prototypes of sporting equipment and specialized tools, fadeproof models for outdoor purposes or unvarnished automotive elements. Since the weather cannot be changed, Z-ASA Pro is the right material which will help you extend the life span of 3D printed objects used outside.

FR Eco-Additive™ 25 is Bromine, antimony, and magnesium free fire retardant and smoke suppressing, polymeric additive. Provides an effective thermal barrier upon exposure to open flame or high radiant heat. This additive is a mixture comprised of TSWB™ and crystalline graphite.

CORAFOAM® U 60 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

Fabru TPC is a Copolymer of ethylene and other unsaturated monomer.

CORAFOAM® U 280 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

FR Eco-Additive™ 20 is Bromine, antimony, and magnesium free fire retardant and smoke suppressing, polymeric additive. Provides an effective thermal barrier upon exposure to open flame or high radiant heat. This additive is a mixture comprised of TSWB™ and crystalline graphite.

CORAFOAM® U 80 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

Fabru ASA has a general chemical resistance, oil and grease resistance, oil resistance.

DuraPro ASA Red is a weatherproof and UV-resistant copolymer developed for industrial applications. It is characterized by high process reliability and is ideally suited for mechanically highly stressed components. The material is electrically insulating. DuraPro ASA is optimized for good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

Introducing Essentium’s new line of industrial grade filaments that are ESD safe. Essentium’s ESD materials are proven to succeed in an industrial setting. With non-marring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications where you need a material that you must trust. PCTG is an easy to print material with significantly increased impact strength when compared to PETG.

CORAFOAM® U 100 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

CORAFOAM® U 310 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

FR Eco-Additive™ 30 is Bromine, antimony, and magnesium free fire retardant and smoke suppressing, polymeric additive. Provides an effective thermal barrier upon exposure to open flame or high radiant heat. This additive is a mixture comprised of TSWB™ and crystalline graphite.

CORAFOAM® U 40 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

A hard, accurate plastic with excellent moisture and temperature stability.Applications High temperature requirements Test of water and fluid handling components Wind tunnel models Master patterns Fixtures, gages and jigs Features High stiffness Excellent accuracy Best in class moisture stability Elevated temperature resistance Benefits Stable and rigid parts that withstand adverse environments Outstanding stiffness for demanding applications Ideal for parts requiring high thermal and moisture resistance

GuangDong ShunDe LuHua Photoelectric New Material Industrial LH-EVA-C916 is suitable for extruding HVAC heating sheets, conductive hoses, bellows and flexible injection molded parts.

CORAFOAM® U 150 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

TSWB® is a general purpose fire retarding and smoke suppressing polymeric additive. TSWB® is bromine, antimony and hydrated mineral free.

BRE 312 is a Eternit/corrugated sheet type used for high HDT, high weather resistance.

Essentium PCTG is a member of the copolyester family, chemically similar to PETG. Our PCTG is an easy-to-use material with incredible surface finish and excellent impact resistance. This robust material can be printed in open air and over a large temperature range. Compared to PETG, our PCTG has a similar strength and stiffness, while offering superior impact strength and chemical resistance.

Insublend Non-flammable UL94 VO is engineered for outdoor electrical equipment, Nanovia Insublend filament allows for the creation of insulating and weatherproof 3D prints. Nanovia Insulblend is perfect for electronics (board supports, connectors), prototypes and industrial use. Its resistance to alkali, acid , bases, ionic, and alcohol solutions , makes it an ideal material for batteries. Nanovia Insublend allows for prints with high thermal, mechanical properties, flame resistance and dielectric. Its Certified non-flammable UL V0.

CORAFOAM® U 200 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

BC 8635E is a multi-purpose elastomer that can perform many functions. Typical product uses and features are: mold fabrication, skin membrane for animated characters, bumpers and many types of urethane rubber parts, excellent as an adhesive for resilient and flexible bonds, excellent weathering properties for outdoor applications, highly water resistant-insensitive to moisture during cure.

Fabru LCP is resistance to acids, resistance to alkalis, general chemical resistance, hydrolytically resistant.

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).