Products in Tooling & Moldmaking: High Tensile Strength

ELASTOSIL® Vario 15 is a pourable, two-component silicone rubber that vulcanizes at room temperature through addition-curing. It can be blended with ELASTOSIL® VARIO 40 to achieve a desired hardness ranging between 15 and 40 Shore A. This versatile silicone rubber finds applications in prototype molding and reproduction molding.

ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.

ELASTOSIL® Vario 40 is a pourable, two-component silicone rubber that vulcanizes at room temperature through addition-curing. It can be blended with ELASTOSIL® VARIO 15 to achieve a desired hardness ranging between 15 and 40 Shore A. This versatile silicone rubber is used in applications such as prototype molding and reproduction molding.

ELASTOSIL® RT 625 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for electronics reproduction molding applications. This product offers excellent mechanical properties and is flowable in nature. It is a two-component system that provides high-quality reproduction molding results.

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

Cerex® fabrics are spunbond nonwoven nylon fabrics produced by spinning and autogenously bonding continuous filaments of nylon 6,6 into a thin, Smooth and strong fabric.

Andisil® 1189 Silane is a bifunctional silane possessing reactive secondary amine and hydrolysable methoxysilyl groups. The dual nature of its reactivity allows Andisil® 1189 Silane to bind chemically to both inorganic (glass, metals, fillers) and organic polymers (thermosets, thermoplastics and elastomers) functioning as an adhesion promoter or surface modifier and can be used for the chemical modification of substances. Andisil® 1189 Silane is a colorless to slight yellowish liquid with a light amine-like odor that is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

PA 66 reinforced with glass fiber

Fabru TPU is a thermoplastic elastomer.

LIM™ 6045 by Momentive Performance Materials is comprised of Liquid Silicone Rubber. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

Fabru TPU-53D is a thermoplastic elastomer.

Essentium’s TPU 74D is the highest durometer filament in our broad flexible portfolio. It is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

PA 66 reinforced with mineral filler

Essentium TPU 95A-Z is a medium durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With nonmarring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Essentium TPU 95A-Z balances high elongation with impressive impact resistance and tensile strength. This filament has a low friction surface that allows for easier feeding while printing.

Ultimaker CPE is chemical resistant, strong, tough, and demonstrates gooddimensional stability. CPE is available in a wide range of colors, includinggrayscale for more professional looking models.

PA 6 reinforced with glass fiber and glass beads

Essentium TPU 74D-Z is a high durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. Essentium’s Z line of filaments are the only industrially-proven safe materials for ESD sensitive applications. Essentium TPU 74D-Z is a no-warp drop in replacement for ABS. It has excellent impact strength, tear strength, and abrasion resistance.

PA 66 reinforced with glass fiber

Taulman 3D Nylon 645 is currently being used by CNC shops around the world to support quick turn prototypes for pre-pilot and pilot runs as well as production runs. As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn need.

GreenTEC blue is a biopolymer specially developed for high-performance applicationswhere high temperature resistance and good mechanical properties are needed. In addition, the raw material is approved according to the FDA-, REACH- and RoHS- Standards.

PA 6 reinforced with glass fiber, flame retarded

With Ultimaker PC filament, you can print strong and tough parts thatretain dimensional stability when subjected to temperatures as high as110 °C. Our PC is engineered to be printed at moderate temperaturescompared to other PC filaments and shows minimized warping to providea seamless 3D printing experience.

Silicones GI-765 is a thixotropic (resistant to flow) tin catalyzed silicone designed to be used when painting or spraying onto vertical surfaces.

PA 66 reinforced with glass fiber

Extrudr PLA NX2 Purple is made form a renewable biopolymer. It combines good mechanical properties with high flexibility. It is suitable for industrial use, rapid prototyping, architecture, food-applications, etc. The raw material is approved according to the REACH-, RoHS- and FDA- Standards.

PA 66 reinforced with mineral filler

Ultimaker PLA filament provides a no-hassle 3D printing experiencethanks to its reliability and good surface quality. Our PLA is made fromorganic and renewable sources. It’s safe, easy to print with, and it serves awide range of applications for both novice and advanced users.

GreenTEC Pro Silver is a high-performance biopolymer, with optimized characteristics for technical and mechanical applications. This material offers excellent temperature resistance and layer adhesion, as well as an appealing semi-matt finish. GreenTEC Pro is in compliance with the FDA-, REACH- and RoHS-Standards.

JFoam™ BX-650 is a two component rigid polyurethane foam system designed for structural void filling applications. This system is well suited for RTM applications where high compressive and tensile strength properties are required during post curing of composite part. BX-650 has a recommended service temperature of 225°F.

Specialty Resin & Chemical Cast-a-Mold Platinum Activator is a food grade platinum (addition) cured silicone rubber used for a variety of applications. It exhibits an easy 1:1 mix ratio, low viscosity, excellent tear strength, tensile strength, elongation, heat deflection, and long library life. Cast-a-Mold Platinum can be used to make translucent rubber molds for casting candies, cakes, polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc. It is user friendly, translucent, FDA compliant, and will cure at room temperature. Platinum cured silicone rubber can be heat accelerated. For example if you heat the mold at 150°F the cure time will be reduced from 8 hours to 30 minutes.

PA 6 reinforced with glass fiber

PA 66 reinforced with mineral filler

Z-ABS is a versatile and economic material which perfectly matches the needs of users who begin their work with 3D printing as well as professionals who want to make savings on in-house prototyping. With a wide selection of post-processing methods, either mechanical or chemical, Z-ABS becomes well-suited not only for producing affordable prototypes, but also for creative applications, such as conceptual models, gadgets or figurines. Z-ABS is something you seek for if you need to 3D print low-cost, attractive-looking objects or prototypes with functional requirements.

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Fabru LCP is resistance to acids, resistance to alkalis, general chemical resistance, hydrolytically resistant.