Products in Exploration & Upstream: Good Mechanical Properties

ELASTOSIL® SUB C 2002 A/B is a two-component, low-viscosity, addition-curing silicone rubber specifically developed for deep-sea applications. It is designed to maintain flexibility in extreme temperature conditions, ranging from -40 °C to +180 °C. This silicone rubber is particularly well-suited for manufacturing various types of thermal insulation devices. Its low viscosity allows for easy flow and application.

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 2595 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Excelene 4990 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Nitrile 4200-70 is nitrile seal ideal for use in a variety of applications.Parco 4200-70 seals are suitable for applications ranging from -35 to +250°F.

Nitrile 4367-70 nitrile seals are ideal for use in low temperatures and hydraulic fluids. Parco 4367-70 seals are suitable for applications ranging from -65 to +275°F.

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

Nitrile 0228-70 is seal which meets the critical requirements of the motor vehicle industry to ensure vehicle safety and performance.

AF801 Peek™ 450G are used in a wide range of oil and gas applications due to the unique combination of properties and range of compounds and unfilled polymers.

Nitrile 4457-65 is nitrile seal ideal for use in low temperatures and hydraulic fluids.Parco 4457-65 seals are suitable for applications ranging from -65 to +200°F.

Nitrile 2295-70 is Resists fuels rich in alcohol better than 4200-70 general-purpose nitrile seals; UL-listed for gasoline, diesel fuel, kerosene, naphtha and alcohol blends with up to 15% ethanol and methanol concentrations, high ACN content for very low swell in fuels; compound not recommended for hot air or ATF.

Nitrile 4262-75 is a excellent compatibility with drilling muds and petroleum oils; withstands service demands of heavy equipment hydraulic systems; Parco’s lowest compression-set, sulfur-cure nitrile.

Nitrile 4465-65 is formulated expressly for use in low-temperature aviation fuel systems; low ACN content enables compounds to meet requirements of Aerospace Materials Specification (AMS) 7271, QPL listed, including passing low-temperature fuel seal test at -65°F.

Nitrile 4067-70 is nitrile seal ideal for use in low temperatures and hydraulic fluids. Parco 4067-70 seals are suitable for applications ranging from -65 to +240°F.

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.

Nitrile 4456-70 is containing no ester plasticizers, compound 4456-70 provides superior compatibility with ABS, polycarbonates and other stress-sensitive plastics used in injection-molded automotive power steering seals.