Products in Oil, Gas & Mining: Hydrocarbons

Glissopal® V 700 is an intermediate product characterized by its chemical composition, polyisobutylene, belonging to the hydrocarbon chemical family. With a physical form of liquid, this product serves as a versatile solution in various industrial applications.

PETROSOL D 40 is a hydrogenated naphtha-kerosene blend featuring a typical distillation range between 150 and 200°C. This product boasts an exceptionally low aromatic content and a barely discernible odor. Due to its minimal aromatic content and nearly odorless nature, PETROSOL D 40 finds application in various industries, including paint and varnish production, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, home air fresheners, and as an effective degreaser.

PETROSOL D 100 is a hydrogenated naphtha-kerosene blend characterized by a typical distillation range of 240-270ºC. This product is recognized for its extremely low aromatic content and mild odor. Like PETROSOL D 60, its low aromatic content and subtle aroma make it a valuable asset in applications ranging from paint and varnish production to fuel, solvents, lubricants, drilling fluids, insecticides, home air fresheners, and degreasers.

PETROSOL D 80 is a hydrogenated naphtha-kerosene blend with a typical flash point greater than or equal to 72ºC. It stands out for its low aromatic and sulfur content and faint odor. Just like its counterparts, PETROSOL D 80 is indispensable in various industries, including paint and varnish manufacturing, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, home air fresheners, and as an efficient degreaser.

PETROSOL D 60 is a hydrogenated naphtha-kerosene blend featuring a typical distillation range of 190–220 °C. This product is distinguished by its remarkably low aromatic content and faint odor. Due to its low aromatic content and almost imperceptible scent, it serves various purposes, such as in the production of paints and varnishes, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, and home air fresheners, as well as an effective degreaser.

Sasol ODC-15 is a highly refined hydrocarbon with a clear, low-viscosity liquid and a mild odor in the kerosene boiling range. Its unique manufacturing process gives it a low normal paraffin content, resulting in a lower freeze point and higher solvency compared to competitors.

LPA -142 Solvent is a high-purity mixture of hydrotreated isoparaffins and naphthenics with very low levels of polynuclear aromatics. It is a clear liquid with a low to medium flash point and a mild odor. Sasol Chemicals LPA 142 Solvent can be used in a wide array of applications, including pesticide formulations, consumer products, lubricating oils, chemical process solvents, oilfield drilling fluids, degreasers, torch fuel, freeze point depressants, coatings, dry cleaning, and parts washing.

Sasol Chemicals LPA Solvent is a high-purity mixture of hydrotreated isoparaffins and naphthenics with very low levels of polynuclear aromatics. It is a clear liquid with a medium flash point and mild odor. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LPA -170 Solvent is a high-purity mixture of hydrotreated isoparaffins and naphthenics with very low levels of polynuclear aromatics. It is a clear liquid with a mid-range flash point and a narrow boiling range. Sasol Chemicals LPA 170 Solvent can be used in a wide array of applications, including pesticide formulations, consumer products, lubricating oils, chemical process solvents, oilfield drilling fluids, degreasers, water treatment chemicals, and freeze point depressants.

LPA -210 Solvent is a high-purity mixture of hydrotreated isoparaffins and naphthenics with very low levels of polynuclear aromatics. It is a clear liquid with a high flash point and a mild odor. LPA 210 Solvent can be used in a wide array of applications, including pesticide formulations, consumer products, lubricating oils, chemical process solvents, printing ink oils, water treatment chemicals, oilfield drilling fluids, degreasers, and metal rolling oils.

PETREPAR® n-C10 is a linear alkane hydrocarbon with a content exceeding 95% in n-decane. This substance has diverse applications, serving as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. It is characterized by its degreasing capabilities and high solvency. It is prevalent in markets related to agriculture and feed, HI&I care, industrial care, and personal care.

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

PETREPAR® n-C14 is a linear alkane hydrocarbon with a content exceeding 97% in n-tetradecane. It has a range of direct applications, serving as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. Similar to n-C10, it is recognized for its degreasing capabilities and high solvency, with applications in the Agriculture & Feed, HI&I Care, Industrial, and Personal Care markets.

PETREPAR® 145 is a linear alkane hydrocarbon featuring a C14-C15 chain with a content exceeding 98% in n-paraffins. This substance finds direct applications as a solvent in printing inks, degreasers, drilling oils, lubricants, herbicides, and insecticides. Classified within the hydrocarbon chemical family, it is noted for its degreasing properties and high solvency, making it suitable for various applications.

Conosol 170 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 180-210 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 195-208 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

DYTEK® DCH-99 (1,2-diamainecyclohexane) is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

Dakota Gasification Company's naphtha is much different from petroleum derived naphtha. It is composed of over 60 percent aromatics and is much closer to a BTX (Benzene, Toluene, Xylene) blend stock. The product is a white to straw colored, mobile, flammable, or combustible liquid with an aromatic odor. The naphtha is extracted from the raw synthesis gas after the gasification process in the rectisol unit.Dakota Gas naphtha is used as a feedstock in refineries where the benzene is extracted for purification. The remainder of the stream is refined and blended into gasoline, diesel, and other high value products.Typical composition of the BTX components in our naphtha is 44 percent benzene, 17 percent toluene, and 3.1 percent xylenes.

Calumet Mineral Spirits aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet LVP 200 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet Mineral Spirits <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 600 Solvent aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Dakota Gasification Company's tar oil is a unique product processed from our gas liquor stream produced during the gasification process and further refined to resemble a residual fuel oil. The product is a dark-brown liquid with a flash point greater than 200 degrees Fahrenheit and an aromatic, musty odor.Dakota Gas tar oil is used as a blend stock into the residual fuel oil market.Tar oil can also be used as a specialty carbon black feedstock.Dakota Gas' tar oil can be considered a premium fuel blend stock due to its low sulfur content, low benzene content, and high flash point.

Conosol 260 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 200 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet LVP 100 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 300-360 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 340 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 210-245<1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet LVP 300 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 200-230 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 170ES aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 215 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet VM P aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet Hexane aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.