Products in Oil, Gas & Mining: Polyolefins

NAFOL Alcohols are blends of high purity linear primary alcohols with even-numbered carbon chain lengths, based on renewable or petrochemical resources. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISOFOL 32 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

Excelene 4990 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

Tasnee HD 100 Orange is a High Density Polyethylene, orange colored resin. The product is classified as PE 100. Tasnee HD 100 Orange provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

SIMONA® PE 100 black 10024802 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

EB 1001 is a Ethyle Propylene Diene monomer with wire mesh. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

EB 1200 is a Ethyle Propylene Diene monomer with aramid. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

SIMONA® PE 100 black 10024797 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Seals Eastern Compound 7045 is 80-duro EPDM.

Nylacast Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic. Polyethylene is available in various grades, offering different properties.

AtenPly GPP35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Inhance Fluoro-Seal UH-1900 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Moharamplast HDPE –MP5020-100 (Orange) is a thermally stabilized bimodal high molecular weight high density polyethylene, classified as PE100 – hexane copolymer. Long term stability is ensured by an optimized stabilization system. It is intended for use in PE-100 pipe applications,where the highest standard for long term hydrostatic strength and resistant for slow and rapid crack growth are desired. Recommended for pipe systems in the applications field of natural gas distribution pipes and drinking water pipes.

SIMONA® PE 100 black 10024775 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

PROlen 9000 HTR a PE 1000 -UHMW- with increased temperature resistance, but good wear values, even at a maximum of 110° C continuously.

Seals Eastern Compound 7189 is 53-duro EPDM.

Moharamplast HDPE MP6020-100 (BLACK) is a bimodel molecular structure compound classified as PE100. It is a black high density polyethylene compound.It has high tensile strength and excellent resistance against fast and slow crack propagation. It also shows very high impact resistance throughout its entire temperature range combined with an acute resistance to fracture.

SIMONA® PE 100 black 10024796 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Seals Eastern Compound 7267 is 75-duro EPM.

Tovo Gomma CSM 5502 65 GRIGIA is a rubber compound which has the trade name chlorosulfonated sheet Gray 65 SHA.

Inhance Fluoro-Seal UH-1045 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Duro-Bond ETFE is a laminated sheet lining consisting of a layer of Ethylenetetrafluoroethylene (ETFE) resin laminated to a fabric backing that is readily bonded to steel, concrete, or FRP substrates.

Nylacast Polypropylene is a light weight copolymer material with high impact ,stress cracking and chemical resistance. Not only does this material offer these characteristics but also exhibits great flexibility and toughness at low temperatures with low moisture intake.

Bell Plastics Ultra XLPE Film is a new and innovative film that offers many of the advantages of UHMWPE films as well as the added benefit of being able to produce much wider sheets, all at a significant cost savings. Bell Plastics Ultra XLPE Film has excellent abrasion and chemical resistance and is ideal for applications such as hose covers and abrasion resistant industrial products.

SIMONA® PE 100 black 10024798 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Moharamplast HDPE- MP6050- 80 (Black) is a black, bimodal, hexene high density polyethylene classified as PE80 material (MRS 8.0), with an optimum balance between flexibility and strength, with excellent carbon black dispersion which gives UV resistance.Produced with advanced gas phase PE process. Long –term stability is ensured by an optimized stabilization system. HDPE-MP5535-80 is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth, and the structure gives outstanding extrudability. The combination between high mechanical properties, excellent long term performance and sagging performance makes it the ideal pressure pipe material.

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

PROlen 9000 GLB PE 1000 -UHMW- PE 1000 -UHMW- cross-linked with micro glass beads. Ideal for areas of application that are enriched with a high proportion of abrasive media, especially in so-called wet areas.

Precision Associates inc. 14540 is 50 durometer black Chlorosulfonated Polyethylene elastomer for general purpose.

Seals Eastern Compound 7204 is 87-duro EPM.

Seals Eastern Compound 7240 is 52-duro EPDM.