Products in Oil, Gas & Mining: Molding Compound

Plenco® 06301 is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. 06301 is available in black.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Plenco® 06553 is a mineral and glass fiber reinforced two-stage phenolic molding compound, formulated for dimensional stability, good chemical resistance to brake fluids, such as DOT 3 and 4, and should provide grinding to close tolerances. 06553 is UL recognized under component file E40654. 06553 is available in black. 06553 was qualified under military specification MIL-M 14 (superseded by ASTM D-5948) TYPE MFH and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 24CF60-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group SMC VE 3700 Vinylester is generally used in industrial sector applications.

SMCarbon® 24CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC RF 10/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 10/20. BMC RF 10/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC S 1850 RF Structural is a bulk molding compound based on a blend of different thermoset resins, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC S 1850 rf. BMC S 1850 RF is certified V0 3,0 mm by UL laboratories. BMC S 1850 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 90CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Lytex® 4149 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

BMCarbon® 30CF60-12mm is generally used in aeronautical, automotive, industrial sector, leisure and clothing applications.

Lytex® 4197 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

BMCarbon® 70CF45-12mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC LS 388/20 C Grigio is generally used in industrial sector applications.

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

RECarbon® 24CFP40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Quantum Composites QC-2150LD is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.

SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

BMCarbon® 70CF45-6mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

Polynt Group SMC LS 3200 R20 C20 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R20 C20 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R20 C20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 10/57 RB is generally used in industrial sector applications.

RECarbon® 90CF40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC RF A 100/18 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade reinforced with glass fibers. This BMC has been developed for electrical application where high chemical resistance is request. Good mechanical properties and good fire protection grade are combined into the BMC RF a 100/18 BMC RF a 100/18 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.