Products in Oil, Gas & Mining: Surface Finish

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

StrongBond™ 200 Adhesive Putty System is a high-strength, toughened, structural epoxy adhesive for the bonding of carbon fabrics to itself and many dissimilar materials. It is a two-phase (toughened) epoxy resin produced using a CTBN elastomer with a flexible epoxy resin backbone for maximum stress and fatigue resistance. StrongBond™ 200 Adhesive Putty System with an immediate high tack consistency, a long working life, and a quick cure time. StrongBond™ 200 Adhesive Putty System may be used at ambient temperature(s) ranging from 55°F(13°C) to 100°F (38°C). The working life at 100°F (38°C) is > 2 hours (working time increases with lower ambient temperatures), with full cures occurring between 6-12 hours depending on cure temperature. Unlike most epoxy adhesives, StrongBond™ 200 Adhesive Putty System cured at ambient temperatures provides heat resistance well more than most engineering limits with an HDT of 85°C (185 °F). The material mixes at 2:1 by volume or 100:44 by weight (resin to hardener). The convenient color-coded components form a uniform color when properly mixed. StrongBond™ 200 Adhesive Putty System is designed for high production meter/mix ram dispensing and although highly thixotropic, has very fast application rates. With low odor and toxicity, StrongBond™ 200 Adhesive Putty System is solvent-free, and 100% solids.

Guangzhou Lushan New Materials DP-1 has good stability, wide processing technology, strong adhesion with the outer PP layer, high mechanical strength and aging resistance property, etc.

Polynt Group 222X is clear and transparent for granite applications. It is generally used in composites applicatons.

Polynt Group 32X series are barriers type coatings developed for the composites and fiberglass industry. The 32X series have been formulated to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. This barrier coat was primarily developed for parts that are in conditions with prolonged contact with water and reduce the risk of water blistering. The 32X barrier coat are formulated to result with a fast cure, sagging resistant and ready-tospray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide catalyst. Normally, dark Colors help to detect and eliminate air bubbles. However, it also can affect the quality of the final product. Contact you representative to have more details on Colors available. Because these 32X series barrier coat are formulated with special additives they have a fair resistance to UV and are not recommended for direct sunlight exposure. It would result in rapid chalking and fading.

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

Polynt Group 55, 55X is designed for interior application; meets particular flame-retardant requirements; not recommended for parts used under direct sun exposure or prolonged water immersion. It is generally used in composites applicatons.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

POLYGEL 969 - Easy to sand when cured; easy application by electrostatic painting; reduces waste during application onto the substrate. Main Applications areas are Composites,Industrial sector,Mass Transports,Railway Sector etc.

Polynt Group 22, 22-01 - superior waterimpact resistance and weathering properties; resistance to staining, chalking, crazing and cracking; high gloss retention; easy sprayability. It is generally used in composites applicatons.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Polynt Group Polygel 31 - orthophthalic gel coat; used in manufacture of FRP parts to be painted; excellent sanding properties and good elongation. Main applications areas are composites, industrial sector, mass transports etc.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

Armorflex® 945 - polyester and vinyl ester tooling gel goats; formulated specifically for mold making; high gloss and hard, durable surfaces. Main applications areas are composites, industrial sector etc.

Polynt Group 22-010LV clear series gelcoat is formulated from high quality iso-npg polyester resin, and is suitable for use in the manufacture of sanitary applications and cultured marble. This gelcoat provide quality finishes which deliver good water resistance, gloss retention and resiliency. The 22-010lv series gelcoat are sag resistant and have a fast curing system.Formulated for spray and roll applicationfast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Permit to fabricator to meet requirements of the canadian standard association b45, 5-02 parts that have to be assembled should be sanded before, to obtain a good adhesion. The 22-010lv series gelcoat may be applied by brush, roller or spray.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.

Armorflex® 953 Neutral Base gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications, but should be used in any application where water and chemical resistance are needed. Armorflex® 953 series also have exceptional gloss and buffing characteristics. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt’s Armorflex® high gloss buffback® gel coats. Armorflex® 953 series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1. Gel coats in the 953 series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. Armorflex® high gloss buffback® gel coats are available in the same wide range of Colors as other Polycor® gel coats. Refer to polynt’s Polycor® color card for color selection. Standard Base White Armorflex® is 953wj340.

Polynt Group Polygel 33 - iso gel coat; good gloss retention and weatherability; resistant to water and osmotic blistering; also suitable for sanitary market. Main applications areas are composites, industrial sector etc.

Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Polynt Group Polygel 32 - orthophthalic gel coat; good wettability; also suitable for transportation market. Main applications areas are composites, industrial sector, mass transports etc.

Polynt Group Polygel 34 - iso NPG gel coat; resistant to water and osmotic blistering. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

RESOLCOAT 7080 HC GRIS / 7086 HC epoxy gelcoat is specially formulated for the production of structural composites parts exposed to fuel and other oil derivatives such as offshore oil drilling equipment, fuel tanks. This new generation system, optimized with excellent self leveling characteristics and excellent air release, is suitable for the manufacture of large composite parts.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

Polynt Group 57VX have been formulated as barrier coats to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. A number benefits have been demonstrated, capitalizing on some of these product’ unique properties.Black color that provides a visual aid to see air bubbles during laminationWhite available for use behind loW-hide colorsless osmoticwater blisteringimproved cosmetics due to reduced fiber print-through & distortionreduced back side tack do not use vinylester barrier coats 57v as a finish coat, as exterior durability is poor, and will result in rapid chalking and fading.

Polycor® Mesmeric is the most recognizable fiberglass swimming-pool finishes range in australia: it is unbeatable in terms of performance, practicality and value for money, as well as esthetically beautiful. Formulated on Polycor® 943 gel coats, Polycor® mesmeric pool finishes offer exceptional water and chemical resistance, as well as long lasting UV stability. Available in three distinct styles, there is a color and texture combination that will co-ordinate with any architectural or exterior setting. Mesmeric stargaze has a brilliant deep sparkling lustrous finish that looks fabulous from a distance. The tiny sparkles change color as the direction of light changes. A fantastic effect as wave action changes the sparkle in sunlight or by pool light at night. Mesmeric granitea has a slightly more restrained finish, still with a beautiful lustrous gloss, but with a fascinating stone texture enhancement, giving a subtle natural look. Mesmeric silken has a deep, lustrous gloss finish but without any texture effects – designed to blend into more traditional architectural surroundings. It is generally used in composites applicatons.

Armorflex® 953 Base White gel coats are high performance, iso/npg products that display desirable high gloss buffback® qualities. Buffback® qualities of these gel coats are demonstrated as:easier, quicker gloss recovery less buffing time to achieve gloss .Higher gloss recovery when polishing back aged or exposed gel coat surfaces.Higher gloss in the repair patch and surrounding refinished area.Higher gloss recoverability from lower gloss molds. Higher gloss can be perceived as a deeper, richer color, providing an enhanced cosmetic appearance to the gel coated part. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from ccp gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. All of these properties contribute to the high quality appeal in FRP parts made from ccp high gloss Armorflex® buffback® gel coats. Gel coats in this series resist weathering and blistering because they are formulated to give high performance against water and certain chemicals, although blister resistance is best with gel coats in the 943 series. Gel coats in the 953 series are made with neopentyl glycol Npg and were primarily developed for sanitary and quality marine applications; however, they should be used in any FRP application where high performance characteristics are desired. 953 gel coats utilize this unique glycol to provide a gel coat that surpasses previous commercial gel coats in its resistance to blistering. They also contain isophthalic acid iso as a cocomponent rather than orthophthalic acid. The isophthalic functionality is used, rather than the orthophthalic to complement the NPG for better end use properties. These gel coats provide durable, reduced maintenance products. These gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1.

Armorflex® 943 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

Polynt Group Polygel 35 - polyester and vinyl ester tooling gel coats; formulated specifically for mold making; high gloss and hard, durable surfaces. Main applications areas are building and construction, composites, industrial sector, marine, railway sector etc.

Polynt Group Fireblock 2330PAWK745 is an unpromoted flame-retardant gel coat formulated for use as an inmold coating for composites manufacturing. Fireblock™ 2330PAWK745, when used in combination with Norsodyne™ fireblock™ resin products, allows manufacturers to fabricate composites parts that meet requirements for a variety of markets, including transportation, building, architecture and construction.