Products in Oil, Gas & Mining: Pipes

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

Fulflex® Anti-abrasion Rubber Sheets is designed for high wear and tear resistance and is well suited for lining and protective coverings in the mineral, metal, material handling, and mining industries.Features/BenefitsHigh abrasion resistance.Excellent wear and impact resistant properties.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

NORSODYNE® S 83111 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Enydyne® LSP-8060B - ortho-DCPD, preaccelerated resin for long gel time RTM. Main applications areas are automotive, industrial sector, marine etc.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

D2-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Polyrov DR is an E-CR single end direct roving specifically designed for use in Weaving, Pultrusion and Filament Winding processes. With a consistent unwinding tension, the direct rovings also offer superb processability with high productivity levels, low fuzz, low static and fast resin wet-out

Epovia Optimum® KRF-3100 is bisphenol-A epoxy vinyl ester resin for pultrusion with low foaming, fast cure and it is generally used in industrial sector applicatons.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.

D1-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Norsodyne® H-485 - isophtalic resin for PVC adhesion. It is generally used in industrial sector applicatons.

Norsodyne® G-550Y is general purpose orthophthalic resin for hand lay up and spray up with high strength and it is generally used in automotive, industrial sector, marine applicatons.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

D1-041-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

DISTITRON® 100 CV2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through hand lay up and spray up method.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Polynt Group BMC RF 10/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 10/20. BMC RF 10/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 1629 NT - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

SMCarbon® 90CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Enydyne® LSP-8020B - ortho-DCPD, preaccelerated resin for short gel time RTM. Main applications areas are automotive, industrial sector, marine etc.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Norsodyne® 3338LSE is general purpose laminating resin with low styrene emission, good water resistance, promoted and non-waxed and it is generally used in automotive, building and construction, industrial sector, marine applicatons.

Stypol® 040-0881 - resin for pigment paste formulation, monomer-free. It is generally used in inks and pigments applicatons.