Products in Oil, Gas & Mining: Tanks

NORSODYNE® S 15080 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 730-2295 - low profile resin for infusion and RTM applications; cosmetic or Class A finish. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

POLYGEL 969 - Easy to sand when cured; easy application by electrostatic painting; reduces waste during application onto the substrate. Main Applications areas are Composites,Industrial sector,Mass Transports,Railway Sector etc.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

D1-200-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Norsodyne® PT-104 - isophthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® RSP10022 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.

D1-073-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Polynt Group 777-5405 - low color RTM resin with excellent cure and barcol hardness development; shrinkage in the molded parts is low and gives excellent cosmetic properties. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® 3600BNP - high filler loading, non-promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® CMI15100W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Stypol® 040-5004 - resin for pigment paste formulation, monomer-free. It is generally used in inks and pigments applicatons.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

DISTITRON® 183 CAV5F - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

DISTITRON® 167 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

NORSODYNE® F 16207 AEL - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in filament winding,injection molding,rtm method.

Polydyne® 6084 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

DISTITRON® 152 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce production of gelcoat through mix with fillers and/or additives.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Polynt Group 781-6010 - toughened vinyl ester resinthat offers improved fracture toughness and crack resistance; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.

HexTow® HM63 carbon fiber is a continuous, high strength, high performance, high modulus, PAN based carbon fiber available in 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and sized to improve its handling characteristics, interlaminar shear strength, compressive strength, and structural properties. It is suggested for use in premium sporting goods and industrial applications. The unique properties of HexTow® HM63 fiber, such as higher tensile strength and modulus, as well as shear and compressive strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® HM63 is International Monohull Open Class Association (IMOCA) certified/ qualified.

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

NORSODYNE® I 13287 AP - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in injection molding,rtm method.