Products in Midstream: Corrosion Resistant

9 Products found in Midstream

VESTAMID® NRG 2101 YE banner

EvonikVESTAMID® NRG 2101 YE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:UV Stabilizer, Heat Stabilizer, Light Stabilizer
Processing Methods:Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Good Impact Strength, Heat Stabilized, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, UV Stabilized, High Melt Strength, Hydrolysis Resistant, Good Aging Behavior, Chemical Resistant, Good Environmental Stress Crack Resistance (ESCR), Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, Very Good Heat Resistance, High Molecular Weight, Semi Crystalline, Grease Resistant, Ozone Resistant, Light Stabilized, Good Light Stability, Oil Resistant, Durable, Electrically Insulating, Solvent Resistant
Color:Yellow

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

ALD Technical Solutions CompositeWrap™ BDC20 Carbon Fabric banner

ALD Technical SolutionsALD Technical Solutions CompositeWrap™ BDC20 Carbon Fabric

Reinforcement Material:Carbon Fibers
Reinforcement Form:Multiaxial Fabric
Processing Methods:Hand Lay-up
Features:Good Mechanical Properties, Corrosion Resistant, High Strength, Light Weight, Durable, Excellent Wetting Behaviour, High Tensile Strength

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

ALD Technical Solutions CompositeWrap™ UDC20 Carbon Fabric banner

ALD Technical SolutionsALD Technical Solutions CompositeWrap™ UDC20 Carbon Fabric

Reinforcement Material:Carbon Fibers
Reinforcement Form:Unidirectional Fabric
Processing Methods:Hand Lay-up
Features:Good Mechanical Properties, Corrosion Resistant, High Strength, Light Weight, Durable, Excellent Wetting Behaviour, High Tensile Strength

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Polotsk Steklovolokno BS16 2400Н-76(200) banner

Polotsk SteklovoloknoPolotsk Steklovolokno BS16 2400Н-76(200)

Reinforcement Material:Basalt Fiber
Reinforcement Form:Roving

BS16 2400Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Polotsk Steklovolokno BS16 1200Н-76(200) banner

Polotsk SteklovoloknoPolotsk Steklovolokno BS16 1200Н-76(200)

Reinforcement Material:Basalt Fiber
Reinforcement Form:Roving

BS16 1200Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Duro-Bond E-CTFE banner

Electro Chemical EngineeringDuro-Bond E-CTFE

Polymer Name:Polychlorotrifluoroethylene (PCTFE)
Physical Form:Sheets
Features:Chemical Resistant, Corrosion Resistant, Good Bonding Strength, Good Abrasion Resistance, Low Permeability, High Purity, Good Smoothness, Service Life Extension
End Uses:Tanks, Chemical Process, Valves
Tensile Strength:42.0 - 48.0 MPa

Duro-Bond E-CTFE is a laminated sheet lining consisting of a layer of Ethylene Chlorotetrafluoroethylene (E-CTFE) resin laminated to a fabric or vulcanized soft rubber backing that is readily bonded to steel, concrete, or FRP substrates.

Duro-Bond ETFE banner

Electro Chemical EngineeringDuro-Bond ETFE

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:Sheets
Features:Chemical Resistant, Corrosion Resistant, Good Bonding Strength, Good Abrasion Resistance, Low Permeability, High Purity, Good Smoothness, Service Life Extension
End Uses:Tanks, Chemical Process, Valves
Tensile Strength:44.0 - 44.0 MPa

Duro-Bond ETFE is a laminated sheet lining consisting of a layer of Ethylenetetrafluoroethylene (ETFE) resin laminated to a fabric backing that is readily bonded to steel, concrete, or FRP substrates.

Duro-Bond PTFE-M banner

Electro Chemical EngineeringDuro-Bond PTFE-M

Polymer Name:Polytetrafluoroethylene (PTFE)
Physical Form:Sheets
Features:Good Bonding Strength, Corrosion Resistant, Service Life Extension, High Purity, Chemical Resistant, Good Smoothness
End Uses:Tanks, Chemical Process
Tensile Strength:20.0 - 40.0 MPa

Duro-Bond PTFE-M is a chemical resistant membrane based on a modified polytetrafluoroethylene resin that is melt flow processible.

Polotsk Steklovolokno TBK-100(100) banner

Polotsk SteklovoloknoPolotsk Steklovolokno TBK-100(100)

Applications:Equipment & Parts, Midstream, Pipes & Plumbing
Product Families:Natural Materials, Reinforcements

TBK-100(100) is a Basalt fabrics for reinforced plastics. It's a perfect insulation, reinforcing and filter medium.