Products in Midstream

Flurocarbon 9021-95 is 95-durometer fluorocarbon having excellent resistance to compression set and better extrusion resistance.

V95X is a high performance general purpose copolymer fluoroelastomer (FKM). This material provides excellent compression set performance and good chemical resistance to phosphate ester, acids, aliphatic and aromatic hydrocarbons, brines, solvents and petroleum fluids.V95X offers superior high temperature capability over HNBR elastomers and provides outstanding O-ring sealing force retention over most other oil-heat resistant elastomers with the exception of FFKM perfluoroelastomers.Key Attributes Good resistance to Explosive Decompression Wide chemical resistance Excellent properties in high pressure applications High strength and extrusion resistant Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, special profile and custom-made seals

Flurocarbon 9115-95 is 95-durometer fluorocarbon having excellent resistance to steam and acid, good resistance to compression set, and excellent resistance to explosive decompression and extrusion.

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

Flurocarbon 9162-95 is 95-durometer fluorocarbon having excellent resistance to compression set, and excellent resistance to explosive decompression and extrusion.

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

Nitrile 0228-70 is seal which meets the critical requirements of the motor vehicle industry to ensure vehicle safety and performance.

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

BS16 1200Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Viton® 9166-75 is 75-durometer fluorocarbon; excellent resistance to fuels, alcohols, and solvents; blue. (Polymer: ETP)

Tetra 12 is an Imidazoline with Tetra 241M (ADBAC) 70% active. It is a water soluble corrosion inhibitor concentrate designed for pipeline applications.

Flurocarbon 9500-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set and low cost.

Nitrile 4367-70 nitrile seals are ideal for use in low temperatures and hydraulic fluids. Parco 4367-70 seals are suitable for applications ranging from -65 to +275°F.

Viton® 9066-75 is 75-durometer fluorocarbon having excellent resistance to compression set, and improved low-temperature flexibility (TR-10 value of -25°F) and meets the requirements of Aerospace Material Specification (AMS) R 83485.

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications

Tetra 14 is an Imidazoline/APQ/Tetra 241M (ADBAC) 70% active. It is a water/oil soluble corrosion inhibitor concentrate designed for pipeline applications.

Duralar® Sliding Wear Control coatings are specifically designed for use in applications that are subject to adhesive wear from the sliding motion of parts such as in reciprocating pistons and pumps. Many of these applications are found in oil and gas, automotive, and other heavy industries.

Bell Plastics Ultra XLPE Film is a new and innovative film that offers many of the advantages of UHMWPE films as well as the added benefit of being able to produce much wider sheets, all at a significant cost savings. Bell Plastics Ultra XLPE Film has excellent abrasion and chemical resistance and is ideal for applications such as hose covers and abrasion resistant industrial products.

Nitrile 4200-70 is nitrile seal ideal for use in a variety of applications.Parco 4200-70 seals are suitable for applications ranging from -35 to +250°F.

R-E-D Fume Oil & Gas - 104 OG is used to make high performance concrete in the oil and gas fields. It provides better flow for easier application, decreases permeability by increasing the resistance to ion penetration and potential gas migration, provides greater enhancement in compressive and flexural strengths, durability, modulus of elasticity, and pore structure, reduces viscosity and the set time of cement based materials.

TBK-100(100) is a Basalt fabrics for reinforced plastics. It's a perfect insulation, reinforcing and filter medium.

Flurocarbon 9505-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set, and low cost and is brown in color.

Nitrile 4456-70 is containing no ester plasticizers, compound 4456-70 provides superior compatibility with ABS, polycarbonates and other stress-sensitive plastics used in injection-molded automotive power steering seals.

Z73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

Flurocarbon 9009-90 is fluorocarbon seal ideal for a variety of oil field and aerospace applications.Parco 9009-90 seals are suitable for applications ranging from -20 to +400°F.

Nitrile 4457-65 is nitrile seal ideal for use in low temperatures and hydraulic fluids.Parco 4457-65 seals are suitable for applications ranging from -65 to +200°F.

Nitrile 4465-65 is formulated expressly for use in low-temperature aviation fuel systems; low ACN content enables compounds to meet requirements of Aerospace Materials Specification (AMS) 7271, QPL listed, including passing low-temperature fuel seal test at -65°F.