Products in Refining & Gas Processing: Polyolefins

7 Products found in Refining & Gas Processing

SP Series™ SHP1500-2 banner

PolygroupSP Series™ SHP1500-2

Polymer Name:High Molecular Weight Polyethylene (HMWPE)
Processing Methods:Sintering

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

SP Series™ SHP2500-1 banner

PolygroupSP Series™ SHP2500-1

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:Sintering

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

SP Series™ SHP1200-1 banner

PolygroupSP Series™ SHP1200-1

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:Sintering

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

SP Series™ SHP3500 banner

PolygroupSP Series™ SHP3500

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:Sintering

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Alpha Associates, Inc EB 1200 banner

Alpha Associates, IncAlpha Associates, Inc EB 1200

Polymer Name:Ethylene Propylene Diene Terpolymer (EPDM)
Physical Form:Sheets
Features:Non Corrosive
End Uses:Industrial Applications, Exhaust Duct Systems, Expansion Joint, Gaskets, Industrial Connectors, Marine Applications
Tensile Strength:9.9905 - 9.9905 MPa
Color:Black

EB 1200 is a Ethyle Propylene Diene monomer with aramid. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

Duro-Bond ETFE banner

Electro Chemical EngineeringDuro-Bond ETFE

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:Sheets
Features:Chemical Resistant, Corrosion Resistant, Good Bonding Strength, Good Abrasion Resistance, Low Permeability, High Purity, Good Smoothness, Service Life Extension
End Uses:Tanks, Chemical Process, Valves
Tensile Strength:44.0 - 44.0 MPa

Duro-Bond ETFE is a laminated sheet lining consisting of a layer of Ethylenetetrafluoroethylene (ETFE) resin laminated to a fabric backing that is readily bonded to steel, concrete, or FRP substrates.

Alpha Associates, Inc EB 1001 banner

Alpha Associates, IncAlpha Associates, Inc EB 1001

Polymer Name:Ethylene Propylene Diene Terpolymer (EPDM)
Physical Form:Sheets
Features:Non Corrosive
End Uses:Industrial Applications, Exhaust Duct Systems, Expansion Joint, Gaskets, Industrial Connectors, Marine Applications
Tensile Strength:9.9905 - 9.9905 MPa
Color:Black

EB 1001 is a Ethyle Propylene Diene monomer with wire mesh. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].