Products in Refining & Gas Processing: Abrasion Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

ACCESS® SF 10,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 10,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 12,500 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 12,500 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 30,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 30,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 60,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 60,000 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions. This high viscosity fluid is suitable for use in applications that require a thicker lubricant film.

CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

KRAIBURG HNBR is a hydrogenated nitrile butadiene rubber used in applications such as numerous dynamic and static products that are subjected to dynamic and abrasive loads with exposure to heat and media, hoses and belts, industrial seals for oil field exploration and processing, as well as rolls for steel and paper factories.

CIP Composites CIP111 is ideal for dry/indoor applications, this material offers a low maintenance and cost effective solution for eliminating external lubrication without compromising performance. 100% polyester material (textile and resin) with the solid lubricant graphite evenly dispersed throughout the resin system.

CIP Composites CIP131 is a very cost effective material commonly used for wear ring, stable in hydraulic fluids, and nonabrasive to mating surfaces.

CIP Composites CIP101 is made with 100% polyester material (textile and resin) with no solid lubricants added, makes this our most cost effective solution for a range of static applications, and is commonly used as electrical insulators.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.