Products in Refining & Gas Processing: Chemical Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications.   Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant   Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries   Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling.   Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

FKM Nano PTFE 80 provides excellent resistance to heat, ozone, weathering and a wide range of chemicals and oils. It is USP class VI tested, FDA compliant and approved for medical uses.FKM has excellent resistance to ozone and weathering, oils and most chemicalsThey can operate under a wide temperature range and are inherently more resistant to burning than other non-fluorinated hydrocarbonsTheir good mechanical properties, improving sealing performance, and good compression set makes FKM a popular choiceIt is also suitable for operation within environments that require parts to be resistant to explosive decompression.

60 durometer black Viton B fluoroelastomer compound

55 Durometer Black Viton A Fluoroelastomer Compound

90 Durometer Black Viton A Fluoroelastomer Compound

FFKM 76 B 3 M1 is well known for their excellent chemical resistance and continuous service operating temperatures of up to 275°C.They are the most chemically resistant elastomers on the marketHave outstanding high temperature, chemical, gas, and liquid permeation resistanceFFKM has excellent steam, ozone and weathering resistanceDelivers exceptional performance for sealing thanks to its elastic propertiesFFKM is highly suitable for use within hazardous environments using aggressive chemicals

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

FKM 70 B 3 M1 Viton provides excellent resistance to heat, ozone, weathering and a wide range of chemicals and oils.FKM has excellent resistance to ozone and weathering, oils and most chemicalsThey can operate under a wide temperature range and are inherently more resistant to burning than other non-fluorinated hydrocarbonsTheir good mechanical properties, improving sealing performance, and good compression set makes FKM a popular choiceIt is also suitable for operation within environments that require parts to be resistant to explosive decompression.

75 Durometer Black Viton B Fluoroelastomer Compound

75 Durometer black Viton A FDA fluoroelastomer compound

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Polynt Group SMC VE 3700 is a sheet molding compound based on a vinylester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC VE 3700 joint good mechanical properties, excellent heat resistance and high chemical resistance. SMC VE 3700 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

TU200 is a polyetheretherketone (PEEK) fiber-reinforced uni-directional tape that processes in the 700-750oF (370-400oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEEK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

Taishan Fiberglass T940H, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

EPOVIA OPTIMUM® KRF 2000 SE - Brominated Epoxy Resin based vinyl ester in styrene. It is used as general purpose in filament winding,vacuum injection,hand lay up and spray up,pultrusion method.

Technobasalt® Roving is a bundle of continuous unidirectional complex basalt fibers. Roving has high natural strength, resistance to aggressive environments, long service life and excellent electrical insulation properties. In terms of its technical characteristics, basalt roving surpasses S-glass and E-glass in many respects, and is not much inferior to carbon. Basalt roving is extremely heat-resistant: the temperature range for long-term use is from –260°C to +680°C. It can withstand temperatures up to 1000 °C for a short time.

Polyrov DR is an E-CR single end direct roving specifically designed for use in Weaving, Pultrusion and Filament Winding processes. With a consistent unwinding tension, the direct rovings also offer superb processability with high productivity levels, low fuzz, low static and fast resin wet-out

Norsodyne® H-305HV has general purpose, good chemical resistance. It is generally used in coatings applicatons.

Polyrov SR is an E-CR glass assembled roving specifically designed for use in the Spray Up process, suitable for thick or thin laminates. The roving offers consistent chopping performance with an even spray pattern. Low static, good laydown and excellent strand separation also make it extremely easy to work with.

NEXA® PFX 8034 is used for High temperature applications. It has excellent Thermal Stability and Chemical Resistance.

RL292 can withstand constant temperature extremes of -65˚ F to 450˚ F (-54˚ C to 232˚ C) with brief excursions to 600˚ F (316˚ C). Silicone-coated Pyroglas® cloths have excellent resistance to most chemicals and oils, and have indefinite shelf life at room temperature. Alpha Associates silicone-coated Pyroglas® cloths are made from proprietary high grade silicone rubber and non-asbestos fiberglass material, to AMS 3320 Rev. G.

TU1100 is a polyvinylidene fluoride (PVDF) fiber-reinforced uni-directional tape that processes is in the 350-400oF (175-200oC) temperature range. The prepreg is designed for oil & gas composite pipe and down-hole applications. PVDF is a semi-crystalline polymer with a good combination of strength, toughness, chemical and solvent resistance.

TU300 is a polyetherketoneketone (PEKK) fiber-reinforced uni-directional tape that processes in the 675-725oF (360-385oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEKK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.

Taishan Fiberglass T920H, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

Aekyung Chemical CW-350 is a tere type UPR.

Armorflex® 953 Neutral Base gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications, but should be used in any application where water and chemical resistance are needed. Armorflex® 953 series also have exceptional gloss and buffing characteristics. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt’s Armorflex® high gloss buffback® gel coats. Armorflex® 953 series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1. Gel coats in the 953 series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. Armorflex® high gloss buffback® gel coats are available in the same wide range of Colors as other Polycor® gel coats. Refer to polynt’s Polycor® color card for color selection. Standard Base White Armorflex® is 953wj340.