Products in Refining & Gas Processing: Dimensional Stability

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

Polyumac Air-Cell T-100 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

CIP Composites CIP131 is a very cost effective material commonly used for wear ring, stable in hydraulic fluids, and nonabrasive to mating surfaces.

CIP Composites CIP101 is made with 100% polyester material (textile and resin) with no solid lubricants added, makes this our most cost effective solution for a range of static applications, and is commonly used as electrical insulators.

CIP Marine™ is manufactured with polyester textile and a high performance polyester resin with solid lubricants PTFE and molybdenum disulfide (MoS2) evenly dispersed throughout the resin. Typically used as propeller shaft and rudder bushings. CIP Marine is a proprietary material specifically developed for marine environments. This combination of resin reinforced with textile creates a dimensionally stable material ideal for replacing bronze in marine environments.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

Quantum Composites QC-2150LD is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.

CIP Composites CIP111 is ideal for dry/indoor applications, this material offers a low maintenance and cost effective solution for eliminating external lubrication without compromising performance. 100% polyester material (textile and resin) with the solid lubricant graphite evenly dispersed throughout the resin system.

Polyumac Air-Cell T-50 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Stypol® APVJ4001 - polyvinyl acetate low profile additive. For use in SMC, BMC, and pultusion. Class A surface and dimensional stability. Main applications areas are building and construction, home and domestic applications, industrial sector etc.

C-TAPE™ U1000P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1064 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

C-TAPE™ U600P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 651 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. *Disponible également en fiber FOE

AMC® 2593 is a chopped carbon fiber reinforced ESC® phenolic molding compound. It is easily moldable and provides parts that are high strength, with high heat resistance, low density and it exhibits low flammability characteristics. The carbon fiber is standard modulus PAN based 3K tow.

Polyumac Air-Cell T-240 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

CIP Composites CIP151A is one of our most commonly used materials due to its ability to provide excellent performance in a wide range of applications and environments. 100% polyester material (textile and resin) with the solid lubrication additives PTFE and molybdenum disulfide (MoS2) evenly dispersed throughout the resin. Enhancement A is added, increasing the overall strength and reduce friction and wear.

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

C-TAPE™ U300P 12K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 318 gsm. It is made using 12K HS carbon fiber. This carbon tape is used primarily for local reinforcement with epoxy resin. *FOE fiber available upon request

Polyumac Air-Cell T-150 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.