Products in Refining & Gas Processing: Good Thermal Stability

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

ACCESS® SF 10,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 10,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 12,500 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 12,500 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 30,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 30,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 60,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 60,000 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions. This high viscosity fluid is suitable for use in applications that require a thicker lubricant film.

Produced from 100% ZOLTEK OX oxidized PAN fibers and later carbonized in our vacuum furnaces, ZOLTEK PX35 carbon felt is widely used. Current applications include insulation in high temperature furnaces, unique properties on our ZOLTEK PX35 carbon felts are invaluable when searching for solutions in complex thermal, corrosive, or conductive applications.

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

ZOLTEK’s Type-48 chopped fibers provide excellent mechanical and electrical properties for reinforcement in thermoplastic molding compounds requiring high strength and modulus, low density, electrical conductivity, dimensional stability, low thermal expansion and excellent friction/wear properties.