Products in Other Industrial Applications: Epoxy & Epoxy Derivatives

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

Addison Clear Wave Coatings TCL-104 is a thermal conductive heat curable epoxy adhesive obtained by cataionic polymerization. It is a one component boron nitride filled non- electrically conductive adhesive ready for use, solvent free, heat curing and thixotropic.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

Lindoxy 190 is a general-purpose cycloaliphatic epoxy resin with a low viscosity. It has been found to be useful for potting and composite applications, which require good electrical resistance properties, good weatherability, and high glass transition temperatures.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.

Rhino Linings USA, Inc. 1314 Resin is a Marine Laminating, Low Viscosity Epoxy Resin/ Offsets:West 105. Used for marine applications such as laminates, adhesives, sealers and fairing compounds. Also used where a low viscosity, quick curing epoxy system is desired. Very low mixed viscosities quickly wet thick reinforcements. Exhibits very low exudation, allowing secondary bonding with minimal preparation.

Lindoxy 290 is a non-crystallizing, low viscosity epoxidized phenol novolac resin with an average functionality of 3. Lindoxy 290 is designed for composites that require a high glass transition temperature along with great chemical resistance.

Addison Clear Wave Coatings TCL-105 is a thermal conductive heat curable epoxy adhesive obtained by cataionic polymerization. It is a one component boron nitride filled non- electrically conductive adhesive ready for use, solvent free, heat curing and thixotropic.

Rhino Linings USA, Inc. 1401-21 Resin is a 1401-21 Resin is a Epoxy System for Infusion. Multifunctional epoxy and cycloaliphatic-amine blend hardener for high performance composite parts.

Durostone® EPC 203 is a fiber reinforced plastic whose glass reinforcement is based on tissue. It is characterized by good mechanical and electrical properties and meets the thermal class F.

TC-1611 A/B is an easy to apply, heat resistant, black surface coat commonly used as a face coat for epoxy laminating and casting systems. TC-1611 A/B provides excellent surface detail reproduction and has a service temperature of 350°F (177°C).

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

Rhino Linings USA, Inc. 1382 Resin is a Low Modulus Flexible Epoxy Resin.1:1 highly flexible epoxy system. Retains flexibility at low temperature. 150% elongation, even when aged. Convenient 1:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1379 Resin is a Laminating and Tooling Epoxy Resin. Specialty epoxy system used for making large scale parts such as wind turbine rotors. Long working life with quick cure. High Tg without post cure.

TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabricationformulated to provide superior wet-out and adhesion to a variety of substrates. It is agreat material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to350°F (177°C).

Sino Polymer MFE 707N is epoxy vinyl ester resin is a brominated novolac-epoxy based vinyl ester developed for the application where need both corrosion resistance and high temperature resistance with excellent fire retardance.

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

Rhino Linings USA, Inc. 1319 Resin is a Press Molding Resin Modified for Improved Flexibility and Adhesion. Press molding epoxy system, modified for added flexibility and adhesion. All listed hardeners cure very quickly at standard process temperatures (160°F – 210°F).

TC-1650 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350°F (177°C). TC-1650 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability and provide production run capability. The majority of applications for TC-1650 A/B are used in conjunction with other materials in developing composite mold structures; however, the TC-1650 A/B isfrequently used by itself.

Durostone® EPC 308 is a fiber-reinforced plastic with high rigidity due to an improved modulus of elasticity. The fiber reinforcement is carried out with a glass filament fabric.

TC-1607 A/B is an unfilled, medium viscosity laminating resin for high temperature plastic tooling and part fabrication. This system is ideal for wet lay-up tooling applications where excellentdimensional stability and high mechanical properties are required.

Durostone® EPM 203 is a fiber-reinforced plastic for mechanical and electrical applications. This epoxy-resin plastic offers high mechanical strength at elevated temperature. The fiber reinforcement is carried out with a glass mat (GRP).

TC-1618 A/B is an aluminum filled hi-temp epoxy surface coat that provides a tough 90 Shore D surface. This resin compound can be applied with a brush, to a thickness of 1/16" on vertical surfaces or over sharp corners without sag or run-off. TC-1618 A/B features excellent heat resistance with ability to handle constant use at temperatures up to 300F (149C). This system does not contain "MDA" or "VCHD".

Durostone® EPC 205 is a fiber-reinforced plastic, which has exceptionally high mechanical strength. The gain is achieved by glass roving fabric and the burning behavior is defined.