Products in Other Industrial Applications: Silica

Natrochem CI 50 DLC-A is a coumarone-indene resin-silicon dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

XYSIL® R170H is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 200m2/g.

Supsil™ Premium 50nm reflects a Polydispersity Index (PDI) of <0.025. Our particle sizes range from 50nm to 3 microns with specific size targeting available within this range. Changes will arise in the coefficient of variation (CV) with 50nm particles to 1 micron particles showing a CV that is < 7%. Slight increases are seen in CV measurements with sizes between 1 to 2 microns showing a CV < 9 - 12%. With a purity of 99.99% our SUPSIL™ PREMIUM can fit a wide range of applications.

Supsil™ Premium 1um reflects a Polydispersity Index (PDI) of <0.025. Our particle sizes range from 50nm to 3 microns with specific size targeting available within this range. Changes will arise in the coefficient of variation (CV) with 50nm particles to 1 micron particles showing a CV that is < 7%. Slight increases are seen in CV measurements with sizes between 1 to 2 microns showing a CV < 9 - 12%. With a purity of 99.99% our SUPSIL™ PREMIUM can fit a wide range of applications.

Supsil™ Premium 600nm reflects a Polydispersity Index (PDI) of <0.025. Our particle sizes range from 50nm to 3 microns with specific size targeting available within this range. Changes will arise in the coefficient of variation (CV) with 50nm particles to 1 micron particles showing a CV that is < 7%. Slight increases are seen in CV measurements with sizes between 1 to 2 microns showing a CV < 9 - 12%. With a purity of 99.99% our SUPSIL™ PREMIUM can fit a wide range of applications.

Sil-Co-Sil® is the high-purity content of our SIL-CO-SIL ground silica (at least 99.5% Si02) helps ensure consistent quality and color. Precision ground from 45-250 micron topsize, it’s available in multiple grades.

Zeonet PB DLC-A is a blend of tetra-n-butyl phosphonium benzotriazolate with silicon dioxide. Used as an elastomer curative and adhesion promoter.

Trilene 65 DLC-A is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.

Natrochem CI 25 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Natrochem TAC DLC-A is a triallyl cyanurate, silicon-dioxide blend accelerator for EPM and co-agent for peroxide-cured EP polymers. It reduces cure time, eliminates odor caused by sulfur co-agent, improves heat aging and compression set resistance.

Mansil PMB is a ultra white fine milled powder having excellent antilocking property.

Natro-Cel TATM-A is a triallytrimellitate, silicon-dioxide blend activator for peroxide cured EPDM & CPE.

Natrochem CI 10 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in the rubber, adhesives, paints, coatings and allied industries.

Natro-Cel C60-A is a low viscosity high chlorine content chlorinated paraffin absorbed on silicon dioxide. Because of its excellent heat stability and compatibility this produce is widely used in PVC formulations as a plasticizer to increase flame retardancy. Natro-Cel C60-A with Its high chlorine content and low viscosity makes an excellent choice for many cutting oil applications. This product also finds many applications in the paint, rubber and fabric coating industries.

Min-U-Sil® is a natural, fine ground silica of the highest purity. Choose from 5 different grades from 5 to 40 micron topsize. Near-neutral pH and narrow size distributions allow very high loading with minimal effect on viscosity and cure rates.

Supsil™ Premium 100nm reflects a Polydispersity Index (PDI) of <0.025. Our particle sizes range from 50nm to 3 microns with specific size targeting available within this range. Changes will arise in the coefficient of variation (CV) with 50nm particles to 1 micron particles showing a CV that is < 7%. Slight increases are seen in CV measurements with sizes between 1 to 2 microns showing a CV < 9 - 12%. With a purity of 99.99% our SUPSIL™ PREMIUM can fit a wide range of applications.

Supsil™ Premium 2um reflects a Polydispersity Index (PDI) of <0.025. Our particle sizes range from 50nm to 3 microns with specific size targeting available within this range. Changes will arise in the coefficient of variation (CV) with 50nm particles to 1 micron particles showing a CV that is < 7%. Slight increases are seen in CV measurements with sizes between 1 to 2 microns showing a CV < 9 - 12%. With a purity of 99.99% our SUPSIL™ PREMIUM can fit a wide range of applications.